Age | Commit message (Collapse) | Author | Files | Lines | |
---|---|---|---|---|---|
2013-10-28 | BOM corrected (sorted by value) and reformated | Kevin Redon | 4 | -90/+56 | |
2013-10-27 | re-add BOM spreadsheet with updated v1.3 components | Harald Welte | 1 | -0/+0 | |
2013-10-27 | MCU pin 48 used to identify v1.3 by putting it to ground (with internal pull-up) | Kevin Redon | 28 | -190009/+89694 | |
2013-10-27 | exported fabrication files | Kevin Redon | 40 | -182715/+148043 | |
2013-10-27 | new components placed and routed | Kevin Redon | 1 | -1679/+1643 | |
2013-10-27 | MBR0530 pin numbers corrected | Kevin Redon | 6 | -228/+251 | |
2013-10-27 | new KiCAD layout format, silkscreen refdes 0.5mm, text 0.75mm, new ↵ | Kevin Redon | 1 | -0/+10632 | |
components loaded | |||||
2013-10-27 | set footprints to symbols | Kevin Redon | 1 | -17/+45 | |
2013-10-27 | exported v1.3 netlist | Kevin Redon | 1 | -1005/+1135 | |
2013-10-27 | v1.3 modifications: replaced IC switch with FPF2109, added schottky and ↵ | Kevin Redon | 1 | -166/+390 | |
pull-down resistors | |||||
2013-10-27 | added FPF210X symbol to library | Kevin Redon | 3 | -3/+62 | |
2013-06-12 | add GEDA and gerber data for microSIM (3FF) adapter cable | Harald Welte | 5 | -0/+1096 | |
Original by Kevin Redon, layout improvements by myself. | |||||
2012-05-20 | import v1.2p release schematics (pdf) and gerber | Harald Welte | 3 | -0/+0 | |
2012-05-19 | Mark IC5 as "do not place" (VCC_Forward) as it doesn't work anywayv1.2_production | Harald Welte | 1 | -0/+0 | |
If the LDO is switched off, then even if we try to forward power from the phone to the SIM, the current will sink inside the LDO (no reverse current protection). | |||||
2012-05-18 | RST_PHONE pulldown added on PCB | Kevin Redon | 30 | -6505/+7639 | |
2012-05-17 | Add R23 (pull-up for !SIM_RST signal) | Harald Welte | 1 | -47/+58 | |
While the SAM7 has an internal pull-up, this is of no use if the bus switch input is left open and collects noise resulting in bogus nRST interrupts. | |||||
2012-05-16 | v1.2p fabrication exported | Kevin Redon | 32 | -141627/+88041 | |
2012-05-16 | C14 change to 4.7uF 0805, silkscreen improved, more space for JTAG | Kevin Redon | 4 | -1912/+1334 | |
2012-05-15 | DRC rules violations corrected | Kevin Redon | 1 | -657/+517 | |
2012-05-15 | SIMtrace: Improve PCB routing of GND, 3V3 and VCC traces | Harald Welte | 1 | -4148/+5879 | |
We have to make sure the impedance of the supply lanes is not too high. Particularly bad was passing GND in 0.2mm under several resistors before even reaching the LDO from the USB socket. This attempts to address the major issues. Also, the input capacitor is moved closer to the LDO once again | |||||
2012-03-16 | production version of SIM-SAM adapter | Harald Welte | 11 | -0/+1958 | |
2012-02-18 | simadapter: proper naming of components | Harald Welte | 1 | -5/+5 | |
2012-02-18 | add SAM-to-FPC-adapter | Harald Welte | 1 | -0/+113 | |
2011-12-29 | hw: sheet reorganized | Kevin Redon | 1 | -345/+337 | |
2011-12-29 | hw: power sources path corrected | Kevin Redon | 1 | -603/+106 | |
2011-12-26 | hw: +1.8V output corrected, as it does not exist | Kevin Redon | 1 | -11/+38 | |
2011-12-26 | hw: input voltage attached to ADC, so to measure max SIM voltage output | Kevin Redon | 1 | -71/+115 | |
2011-12-26 | hw: only 2 adjustable LDOs are used. 1x3.3v for CPU, 1 for the SIM | Kevin Redon | 1 | -282/+202 | |
2011-12-26 | hw: power selector for phone removed. only VCC_PHONE is needed | Kevin Redon | 1 | -352/+2 | |
2011-12-22 | hw: Rakefile tries to guess gEDA scheme directory | Kevin Redon | 1 | -1/+15 | |
2011-12-21 | Merge branch 'master' of git.osmocom.org:simtrace | Kevin Redon | 7 | -192/+935 | |
2011-12-15 | FFC: add edges of stiffener to Eco1 layer | Harald Welte | 5 | -8/+251 | |
2011-12-14 | add nicely rendered schematics for v1.0p and v1.1p | Harald Welte | 2 | -0/+0 | |
2011-12-14 | FFC: add "sysmocom" text on copper layer of all four adapters | Harald Welte | 4 | -190/+690 | |
2011-12-08 | hw: LDO documented | Kevin Redon | 1 | -144/+250 | |
2011-12-08 | hw: pdf removed. use the rakefile to generate it | Kevin Redon | 2 | -3/+10 | |
2011-12-07 | hw: 3variables LDOs TC1071 used for 1.8V,3.0V,3.3V | Kevin Redon | 1 | -213/+258 | |
2011-12-07 | hw: SIM card is smaller (14.9mm instead of 15mm) to better fit in the slot | Kevin Redon | 4 | -163/+108 | |
2011-12-06 | hw: fabrication output generatedv1.1_production | Kevin Redon | 3 | -188/+187 | |
2011-12-01 | hw: LDO changed(now using multiple TP1071), PWR lines remaned according to ↵ | Kevin Redon | 3 | -117/+296 | |
classes | |||||
2011-11-29 | hw: SIM FFC cables gerber exported. only ppa/paxer kicad could open pcb \!\!\! | Kevin Redon | 3 | -0/+1176 | |
2011-11-22 | hw: part information added | Kevin Redon | 3 | -4/+16 | |
2011-11-21 | hw: Rakefile can check component properties | Kevin Redon | 1 | -1/+2 | |
2011-11-21 | hw: components have now part description | Kevin Redon | 10 | -417/+1413 | |
2011-11-17 | hw: kicad schema remove, geda rakefile builds the schema. version set to ↵ | Kevin Redon | 5 | -47658/+72 | |
v1.5 (to go up to v2.0) | |||||
2011-11-14 | datasheet folder removed: too many new datasheets used for SIMtrace v2, ↵ | Kevin Redon | 21 | -76059/+0 | |
takes to much space in git, is under copyright | |||||
2011-11-14 | hw: translator added | Kevin Redon | 2 | -88/+357 | |
2011-11-13 | hw: power selector implemented (demultiplexer + inverer + power switch) | Kevin Redon | 3 | -361/+876 | |
2011-11-13 | hw: inverted pin name corrected | Kevin Redon | 2 | -5/+5 | |
2011-11-13 | hw: power switch replaced: FPF2005 to FPF2300 | Kevin Redon | 2 | -344/+768 | |