aboutsummaryrefslogtreecommitdiffstats
path: root/hardware/kicad/SIMtrace.brd
AgeCommit message (Expand)AuthorFilesLines
2013-10-27MCU pin 48 used to identify v1.3 by putting it to ground (with internal pull-up)Kevin Redon1-15746/+0
2012-05-18RST_PHONE pulldown added on PCBKevin Redon1-729/+803
2012-05-16v1.2p fabrication exportedKevin Redon1-3/+3
2012-05-16C14 change to 4.7uF 0805, silkscreen improved, more space for JTAGKevin Redon1-1048/+787
2012-05-15DRC rules violations correctedKevin Redon1-657/+517
2012-05-15SIMtrace: Improve PCB routing of GND, 3V3 and VCC tracesHarald Welte1-4148/+5879
2011-11-05hw: sysmocom added to copper, gerber renderedKevin Redon1-166/+174
2011-11-05hw: solder mask between at91sam7s addedKevin Redon1-325/+3996
2011-11-05VPP connected through bus switchKevin Redon1-4636/+910
2011-11-03+1.8V line enlarged on C12, C15, C16. not possible on C19Kevin Redon1-225/+184
2011-11-03footprint refreched, cap near LDOKevin Redon1-1880/+1918
2011-07-02v1.0p corrected and rendered. BOM updatedv1.0_productionKevin Redon1-73/+89
2011-07-02D2 and D3 now also use STPS340U instead of 1N5819Kevin Redon1-579/+490
2011-07-02PS/gerber rendered for productionKevin Redon1-300/+167
2011-07-02board adapted to new footprintsKevin Redon1-1262/+1652
2011-06-23BOM updatedKevin Redon1-11/+11
2011-06-23ps/gerber rerendered for the thermal footprintsKevin Redon1-1/+1
2011-06-23thermal pads were missing on the bottom layer on the PCB in kicadKevin Redon1-128/+658
2011-06-21v1.0 released. board version added, output (schema,gerber) renderedKevin Redon1-5707/+8229
2011-06-21VCC track increased, name addedKevin Redon1-881/+3359
2011-06-21diode indicator addedKevin Redon1-2326/+67
2011-06-20routing redoneKevin Redon1-4289/+6455
2011-06-20LDO, and power switch added. not verified yetKevin Redon1-3989/+4081
2011-06-20test/erase pins movedKevin Redon1-2873/+389
2011-06-20VCC bigger tracksKevin Redon1-1985/+2267
2011-06-20bus switch CB3q3244 used instead of QS3244Kevin Redon1-629/+712
2011-06-20serial movedKevin Redon1-878/+822
2011-06-20USB changed, BOM updatedKevin Redon1-569/+820
2011-06-20tps footprint improvedKevin Redon1-61/+61
2011-06-19VCC_PHONE connected to GPIOKevin Redon1-320/+386
2011-06-19SIM_SW connected to GND, components movedKevin Redon1-4367/+4762
2011-06-18battery name changedKevin Redon1-6/+6
2011-06-17component name moved, pin 1 markedKevin Redon1-131/+156
2011-06-15better routingKevin Redon1-4291/+3838
2011-06-15second gnd added for TPS73633Kevin Redon1-218/+201
2011-06-15better route for sw2Kevin Redon1-6335/+4492
2011-06-15UDP_PUP now connected to PA16 (pin 19) on schemaKevin Redon1-1/+1
2011-06-15switch routing correctedKevin Redon1-267/+301
2011-06-15BC847 footprint correctedKevin Redon1-329/+413
2011-05-22debug port changedKevin Redon1-1280/+1255
2011-05-17board reroutedKevin Redon1-6798/+7303
2011-05-15kevin local new versin enforcedKevin Redon1-9/+11758
2011-05-13update kicad project to v0.9+Kevin Redon1-4848/+10
2011-05-13rename from SIMtrace to SIMtraceKevin Redon1-0/+4921
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 16:55:17 +0000