/* * Arm PrimeCell PL050 Kyeboard / Mouse Interface * * Copyright (c) 2006 CodeSourcery. * Written by Paul Brook * * This code is licenced under the GPL. */ #include "vl.h" typedef struct { void *dev; uint32_t base; uint32_t cr; uint32_t clk; uint32_t last; void *pic; int pending; int irq; int is_mouse; } pl050_state; static const unsigned char pl050_id[] = { 0x50, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; static void pl050_update(void *opaque, int level) { pl050_state *s = (pl050_state *)opaque; int raise; s->pending = level; raise = (s->pending && (s->cr & 0x10) != 0) || (s->cr & 0x08) != 0; pic_set_irq_new(s->pic, s->irq, raise); } static uint32_t pl050_read(void *opaque, target_phys_addr_t offset) { pl050_state *s = (pl050_state *)opaque; offset -= s->base; if (offset >= 0xfe0 && offset < 0x1000) return pl050_id[(offset - 0xfe0) >> 2]; switch (offset >> 2) { case 0: /* KMICR */ return s->cr; case 1: /* KMISTAT */ /* KMIC and KMID bits not implemented. */ if (s->pending) { return 0x10; } else { return 0; } case 2: /* KMIDATA */ if (s->pending) s->last = ps2_read_data(s->dev); return s->last; case 3: /* KMICLKDIV */ return s->clk; case 4: /* KMIIR */ return s->pending | 2; default: cpu_abort (cpu_single_env, "pl050_read: Bad offset %x\n", offset); return 0; } } static void pl050_write(void *opaque, target_phys_addr_t offset, uint32_t value) { pl050_state *s = (pl050_state *)opaque; offset -= s->base; switch (offset >> 2) { case 0: /* KMICR */ s->cr = value; pl050_update(s, s->pending); /* ??? Need to implement the enable/disable bit. */ break; case 2: /* KMIDATA */ /* ??? This should toggle the TX interrupt line. */ /* ??? This means kbd/mouse can block each other. */ if (s->is_mouse) { ps2_write_mouse(s->dev, value); } else { ps2_write_keyboard(s->dev, value); } break; case 3: /* KMICLKDIV */ s->clk = value; return; default: cpu_abort (cpu_single_env, "pl050_write: Bad offset %x\n", offset); } } static CPUReadMemoryFunc *pl050_readfn[] = { pl050_read, pl050_read, pl050_read }; static CPUWriteMemoryFunc *pl050_writefn[] = { pl050_write, pl050_write, pl050_write }; void pl050_init(uint32_t base, void *pic, int irq, int is_mouse) { int iomemtype; pl050_state *s; s = (pl050_state *)qemu_mallocz(sizeof(pl050_state)); iomemtype = cpu_register_io_memory(0, pl050_readfn, pl050_writefn, s); cpu_register_physical_memory(base, 0x00000fff, iomemtype); s->base = base; s->pic = pic; s->irq = irq; s->is_mouse = is_mouse; if (is_mouse) s->dev = ps2_mouse_init(pl050_update, s); else s->dev = ps2_kbd_init(pl050_update, s); /* ??? Save/restore. */ }