/* * QEMU PC keyboard emulation * * Copyright (c) 2003 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "hw.h" #include "isa.h" #include "pc.h" #include "ps2.h" #include "sysemu.h" /* debug PC keyboard */ //#define DEBUG_KBD #ifdef DEBUG_KBD #define DPRINTF(fmt, ...) \ do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0) #else #define DPRINTF(fmt, ...) #endif /* Keyboard Controller Commands */ #define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ #define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ #define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ #define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ #define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ #define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ #define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ #define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ #define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ #define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ #define KBD_CCMD_READ_INPORT 0xC0 /* read input port */ #define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */ #define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */ #define KBD_CCMD_WRITE_OBUF 0xD2 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if initiated by the auxiliary device */ #define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ #define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */ #define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */ #define KBD_CCMD_PULSE_BITS_3_0 0xF0 /* Pulse bits 3-0 of the output port P2. */ #define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */ #define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */ /* Keyboard Commands */ #define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ #define KBD_CMD_ECHO 0xEE #define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ #define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ #define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ #define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ #define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ #define KBD_CMD_RESET 0xFF /* Reset */ /* Keyboard Replies */ #define KBD_REPLY_POR 0xAA /* Power on reset */ #define KBD_REPLY_ACK 0xFA /* Command ACK */ #define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ /* Status Register Bits */ #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ #define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ #define KBD_STAT_SELFTEST 0x04 /* Self test successful */ #define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ #define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ #define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ #define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ #define KBD_STAT_PERR 0x80 /* Parity error */ /* Controller Mode Register Bits */ #define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ #define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ #define KBD_MODE_SYS 0x04 /* The system flag (?) */ #define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ #define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ #define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ #define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ #define KBD_MODE_RFU 0x80 /* Output Port Bits */ #define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */ #define KBD_OUT_A20 0x02 /* x86 only */ #define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */ #define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */ /* Mouse Commands */ #define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ #define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ #define AUX_SET_RES 0xE8 /* Set resolution */ #define AUX_GET_SCALE 0xE9 /* Get scaling factor */ #define AUX_SET_STREAM 0xEA /* Set stream mode */ #define AUX_POLL 0xEB /* Poll */ #define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ #define AUX_SET_WRAP 0xEE /* Set wrap mode */ #define AUX_SET_REMOTE 0xF0 /* Set remote mode */ #define AUX_GET_TYPE 0xF2 /* Get type */ #define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ #define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ #define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ #define AUX_SET_DEFAULT 0xF6 #define AUX_RESET 0xFF /* Reset aux device */ #define AUX_ACK 0xFA /* Command byte ACK. */ #define MOUSE_STATUS_REMOTE 0x40 #define MOUSE_STATUS_ENABLED 0x20 #define MOUSE_STATUS_SCALE21 0x10 #define KBD_PENDING_KBD 1 #define KBD_PENDING_AUX 2 typedef struct KBDState { uint8_t write_cmd; /* if non zero, write data to port 60 is expected */ uint8_t status; uint8_t mode; uint8_t outport; /* Bitmask of devices with data available. */ uint8_t pending; void *kbd; void *mouse; qemu_irq irq_kbd; qemu_irq irq_mouse; qemu_irq *a20_out; target_phys_addr_t mask; } KBDState; /* update irq and KBD_STAT_[MOUSE_]OBF */ /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be incorrect, but it avoids having to simulate exact delays */ static void kbd_update_irq(KBDState *s) { int irq_kbd_level, irq_mouse_level; irq_kbd_level = 0; irq_mouse_level = 0; s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF); if (s->pending) { s->status |= KBD_STAT_OBF; s->outport |= KBD_OUT_OBF; /* kbd data takes priority over aux data. */ if (s->pending == KBD_PENDING_AUX) { s->status |= KBD_STAT_MOUSE_OBF; s->outport |= KBD_OUT_MOUSE_OBF; if (s->mode & KBD_MODE_MOUSE_INT) irq_mouse_level = 1; } else { if ((s->mode & KBD_MODE_KBD_INT) && !(s->mode & KBD_MODE_DISABLE_KBD)) irq_kbd_level = 1; } } qemu_set_irq(s->irq_kbd, irq_kbd_level); qemu_set_irq(s->irq_mouse, irq_mouse_level); } static void kbd_update_kbd_irq(void *opaque, int level) { KBDState *s = (KBDState *)opaque; if (level) s->pending |= KBD_PENDING_KBD; else s->pending &= ~KBD_PENDING_KBD; kbd_update_irq(s); } static void kbd_update_aux_irq(void *opaque, int level) { KBDState *s = (KBDState *)opaque; if (level) s->pending |= KBD_PENDING_AUX; else s->pending &= ~KBD_PENDING_AUX; kbd_update_irq(s); } static uint32_t kbd_read_status(void *opaque, uint32_t addr) { KBDState *s = opaque; int val; val = s->status; DPRINTF("kbd: read status=0x%02x\n", val); return val; } static void kbd_queue(KBDState *s, int b, int aux) { if (aux) ps2_queue(s->mouse, b); else ps2_queue(s->kbd, b); } static void outport_write(KBDState *s, uint32_t val) { DPRINTF("kbd: write outport=0x%02x\n", val); s->outport = val; if (s->a20_out) { qemu_set_irq(*s->a20_out, (val >> 1) & 1); } if (!(val & 1)) { qemu_system_reset_request(); } } static void kbd_write_command(void *opaque, uint32_t addr, uint32_t val) { KBDState *s = opaque; DPRINTF("kbd: write cmd=0x%02x\n", val); /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE * command specify the output port bits to be pulsed. * 0: Bit should be pulsed. 1: Bit should not be modified. * The only useful version of this command is pulsing bit 0, * which does a CPU reset. */ if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { if(!(val & 1)) val = KBD_CCMD_RESET; else val = KBD_CCMD_NO_OP; } switch(val) { case KBD_CCMD_READ_MODE: kbd_queue(s, s->mode, 0); break; case KBD_CCMD_WRITE_MODE: case KBD_CCMD_WRITE_OBUF: case KBD_CCMD_WRITE_AUX_OBUF: case KBD_CCMD_WRITE_MOUSE: case KBD_CCMD_WRITE_OUTPORT: s->write_cmd = val; break; case KBD_CCMD_MOUSE_DISABLE: s->mode |= KBD_MODE_DISABLE_MOUSE; break; case KBD_CCMD_MOUSE_ENABLE: s->mode &= ~KBD_MODE_DISABLE_MOUSE; break; case KBD_CCMD_TEST_MOUSE: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_SELF_TEST: s->status |= KBD_STAT_SELFTEST; kbd_queue(s, 0x55, 0); break; case KBD_CCMD_KBD_TEST: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_KBD_DISABLE: s->mode |= KBD_MODE_DISABLE_KBD; kbd_update_irq(s); break; case KBD_CCMD_KBD_ENABLE: s->mode &= ~KBD_MODE_DISABLE_KBD; kbd_update_irq(s); break; case KBD_CCMD_READ_INPORT: kbd_queue(s, 0x00, 0); break; case KBD_CCMD_READ_OUTPORT: kbd_queue(s, s->outport, 0); break; case KBD_CCMD_ENABLE_A20: if (s->a20_out) { qemu_irq_raise(*s->a20_out); } s->outport |= KBD_OUT_A20; break; case KBD_CCMD_DISABLE_A20: if (s->a20_out) { qemu_irq_lower(*s->a20_out); } s->outport &= ~KBD_OUT_A20; break; case KBD_CCMD_RESET: qemu_system_reset_request(); break; case KBD_CCMD_NO_OP: /* ignore that */ break; default: fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", val); break; } } static uint32_t kbd_read_data(void *opaque, uint32_t addr) { KBDState *s = opaque; uint32_t val; if (s->pending == KBD_PENDING_AUX) val = ps2_read_data(s->mouse); else val = ps2_read_data(s->kbd); DPRINTF("kbd: read data=0x%02x\n", val); return val; } static void kbd_write_data(void *opaque, uint32_t addr, uint32_t val) { KBDState *s = opaque; DPRINTF("kbd: write data=0x%02x\n", val); switch(s->write_cmd) { case 0: ps2_write_keyboard(s->kbd, val); break; case KBD_CCMD_WRITE_MODE: s->mode = val; ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0); /* ??? */ kbd_update_irq(s); break; case KBD_CCMD_WRITE_OBUF: kbd_queue(s, val, 0); break; case KBD_CCMD_WRITE_AUX_OBUF: kbd_queue(s, val, 1); break; case KBD_CCMD_WRITE_OUTPORT: outport_write(s, val); break; case KBD_CCMD_WRITE_MOUSE: ps2_write_mouse(s->mouse, val); break; default: break; } s->write_cmd = 0; } static void kbd_reset(void *opaque) { KBDState *s = opaque; s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT; s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED; s->outport = KBD_OUT_RESET | KBD_OUT_A20; } static const VMStateDescription vmstate_kbd = { .name = "pckbd", .version_id = 3, .minimum_version_id = 3, .minimum_version_id_old = 3, .fields = (VMStateField []) { VMSTATE_UINT8(write_cmd, KBDState), VMSTATE_UINT8(status, KBDState), VMSTATE_UINT8(mode, KBDState), VMSTATE_UINT8(pending, KBDState), VMSTATE_END_OF_LIST() } }; /* Memory mapped interface */ static uint32_t kbd_mm_readb (void *opaque, target_phys_addr_t addr) { KBDState *s = opaque; if (addr & s->mask) return kbd_read_status(s, 0) & 0xff; else return kbd_read_data(s, 0) & 0xff; } static void kbd_mm_writeb (void *opaque, target_phys_addr_t addr, uint32_t value) { KBDState *s = opaque; if (addr & s->mask) kbd_write_command(s, 0, value & 0xff); else kbd_write_data(s, 0, value & 0xff); } static const MemoryRegionOps i8042_mmio_ops = { .endianness = DEVICE_NATIVE_ENDIAN, .old_mmio = { .read = { kbd_mm_readb, kbd_mm_readb, kbd_mm_readb }, .write = { kbd_mm_writeb, kbd_mm_writeb, kbd_mm_writeb }, }, }; void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq, MemoryRegion *region, ram_addr_t size, target_phys_addr_t mask) { KBDState *s = g_malloc0(sizeof(KBDState)); s->irq_kbd = kbd_irq; s->irq_mouse = mouse_irq; s->mask = mask; vmstate_register(NULL, 0, &vmstate_kbd, s); memory_region_init_io(region, &i8042_mmio_ops, s, "i8042", size); s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); qemu_register_reset(kbd_reset, s); } typedef struct ISAKBDState { ISADevice dev; KBDState kbd; MemoryRegion io[2]; } ISAKBDState; void i8042_isa_mouse_fake_event(void *opaque) { ISADevice *dev = opaque; KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd); ps2_mouse_fake_event(s->mouse); } void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out) { KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd); s->a20_out = a20_out; } static const VMStateDescription vmstate_kbd_isa = { .name = "pckbd", .version_id = 3, .minimum_version_id = 3, .minimum_version_id_old = 3, .fields = (VMStateField []) { VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState), VMSTATE_END_OF_LIST() } }; static const MemoryRegionPortio i8042_data_portio[] = { { 0, 1, 1, .read = kbd_read_data, .write = kbd_write_data }, PORTIO_END_OF_LIST() }; static const MemoryRegionPortio i8042_cmd_portio[] = { { 0, 1, 1, .read = kbd_read_status, .write = kbd_write_command }, PORTIO_END_OF_LIST() }; static const MemoryRegionOps i8042_data_ops = { .old_portio = i8042_data_portio }; static const MemoryRegionOps i8042_cmd_ops = { .old_portio = i8042_cmd_portio }; static int i8042_initfn(ISADevice *dev) { ISAKBDState *isa_s = DO_UPCAST(ISAKBDState, dev, dev); KBDState *s = &isa_s->kbd; isa_init_irq(dev, &s->irq_kbd, 1); isa_init_irq(dev, &s->irq_mouse, 12); memory_region_init_io(isa_s->io + 0, &i8042_data_ops, s, "i8042-data", 1); isa_register_ioport(dev, isa_s->io + 0, 0x60); memory_region_init_io(isa_s->io + 1, &i8042_cmd_ops, s, "i8042-cmd", 1); isa_register_ioport(dev, isa_s->io + 1, 0x64); s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); qemu_register_reset(kbd_reset, s); return 0; } static void i8042_class_initfn(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); ISADeviceClass *ic = ISA_DEVICE_CLASS(klass); ic->init = i8042_initfn; dc->no_user = 1; dc->vmsd = &vmstate_kbd_isa; } static TypeInfo i8042_info = { .name = "i8042", .parent = TYPE_ISA_DEVICE, .instance_size = sizeof(ISAKBDState), .class_init = i8042_class_initfn, }; static void i8042_register_types(void) { type_register_static(&i8042_info); } type_init(i8042_register_types)