QEMU Monitor Protocol Events ============================ BLOCK_IO_ERROR -------------- Emitted when a disk I/O error occurs. Data: - "device": device name (json-string) - "operation": I/O operation (json-string, "read" or "write") - "action": action that has been taken, it's one of the following (json-string): "ignore": error has been ignored "report": error has been reported to the device "stop": error caused VM to be stopped Example: { "event": "BLOCK_IO_ERROR", "data": { "device": "ide0-hd1", "operation": "write", "action": "stop" }, "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } Note: If action is "stop", a STOP event will eventually follow the BLOCK_IO_ERROR event. RESET ----- Emitted when the Virtual Machine is reseted. Data: None. Example: { "event": "RESET", "timestamp": { "seconds": 1267041653, "microseconds": 9518 } } RTC_CHANGE ---------- Emitted when the guest changes the RTC time. Data: - "offset": delta against the host UTC in seconds (json-number) Example: { "event": "RTC_CHANGE", "data": { "offset": 78 }, "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } SHUTDOWN -------- Emitted when the Virtual Machine is powered down. Data: None. Example: { "event": "SHUTDOWN", "timestamp": { "seconds": 1267040730, "microseconds": 682951 } } Note: If the command-line option "-no-shutdown" has been specified, a STOP event will eventually follow the SHUTDOWN event. STOP ---- Emitted when the Virtual Machine is stopped. Data: None. Example: { "event": "SHUTDOWN", "timestamp": { "seconds": 1267041730, "microseconds": 281295 } } VNC_CONNECTED ------------- Emitted when a VNC client establishes a connection. Data: - "server": Server information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") - "auth": authentication method (json-string, optional) - "client": Client information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") Example: { "event": "VNC_CONNECTED", "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1" } }, "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } Note: This event is emitted before any authentication takes place, thus the authentication ID is not provided. VNC_DISCONNECTED ---------------- Emitted when the conection is closed. Data: - "server": Server information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") - "auth": authentication method (json-string, optional) - "client": Client information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") - "x509_dname": TLS dname (json-string, optional) - "sasl_username": SASL username (json-string, optional) Example: { "event": "VNC_DISCONNECTED", "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1", "sasl_username": "luiz" } }, "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } VNC_INITIALIZED --------------- Emitted after authentication takes place (if any) and the VNC session is made active. Data: - "server": Server information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") - "auth": authentication method (json-string, optional) - "client": Client information (json-object) - "host": IP address (json-string) - "service": port number (json-string) - "family": address family (json-string, "ipv4" or "ipv6") - "x509_dname": TLS dname (json-string, optional) - "sasl_username": SASL username (json-string, optional) Example: { "event": "VNC_INITIALIZED", "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0"}, "client": { "family": "ipv4", "service": "46089", "host": "127.0.0.1", "sasl_username": "luiz" } }, "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } WATCHDOG -------- Emitted when the watchdog device's timer is expired. Data: - "action": Action that has been taken, it's one of the following (json-string): "reset", "shutdown", "poweroff", "pause", "debug", or "none" Example: { "event": "WATCHDOG", "data": { "action": "reset" }, "timestamp": { "seconds": 1267061043, "microseconds": 959568 } } Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is followed respectively by the RESET, SHUTDOWN, or STOP events.