# Makefile for QEMU. # This needs to be defined before rules.mak GENERATED_HEADERS = config-host.h ifneq ($(wildcard config-host.mak),) # Put the all: rule here so that config-host.mak can contain dependencies. all: build-all include config-host.mak include $(SRC_PATH)/rules.mak config-host.mak: configure @echo $@ is out-of-date, running configure @sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh else config-host.mak: @echo "Please call configure before running make!" @exit 1 endif # Don't try to regenerate Makefile or configure # We don't generate any of them Makefile: ; configure: ; .PHONY: all clean cscope distclean dvi html info install install-doc \ recurse-all speed tar tarbin test build-all VPATH=$(SRC_PATH):$(SRC_PATH)/hw LIBS+=-lz $(LIBS_TOOLS) ifdef BUILD_DOCS DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 else DOCS= endif SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory) SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS)) config-all-devices.mak: $(SUBDIR_DEVICES_MAK) $(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@") %/config-devices.mak: default-configs/%.mak $(call quiet-command,cat $< > $@.tmp, " GEN $@") @if test -f $@ ; then \ echo "WARNING: $@ out of date." ;\ echo "Run \"make defconfig\" to regenerate." ; \ rm $@.tmp ; \ else \ mv $@.tmp $@ ; \ fi defconfig: rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK) -include config-all-devices.mak build-all: $(DOCS) $(TOOLS) recurse-all config-host.h: config-host.h-timestamp config-host.h-timestamp: config-host.mak SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS)) subdir-%: $(GENERATED_HEADERS) $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,) $(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a $(filter %-user,$(SUBDIR_RULES)): libuser.a libuser.a: $(GENERATED_HEADERS) $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libuser V="$(V)" TARGET_DIR="libuser/" all,) ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS)) romsubdir-%: $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",) ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS)) recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES) ####################################################################### # QObject qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o qobject-obj-y += qerror.o ####################################################################### # block-obj-y is code used by both qemu system emulation and qemu-img block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o block-obj-y += nbd.o block.o aio.o aes.o osdep.o block-obj-$(CONFIG_POSIX) += posix-aio-compat.o block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o block-nested-y += parallels.o nbd.o block-nested-$(CONFIG_WIN32) += raw-win32.o block-nested-$(CONFIG_POSIX) += raw-posix.o block-nested-$(CONFIG_CURL) += curl.o block-obj-y += $(addprefix block/, $(block-nested-y)) net-obj-y = net.o net-nested-y = queue.o checksum.o util.o net-nested-y += socket.o net-nested-y += dump.o net-nested-$(CONFIG_POSIX) += tap.o net-nested-$(CONFIG_LINUX) += tap-linux.o net-nested-$(CONFIG_WIN32) += tap-win32.o net-nested-$(CONFIG_BSD) += tap-bsd.o net-nested-$(CONFIG_SOLARIS) += tap-solaris.o net-nested-$(CONFIG_AIX) += tap-aix.o net-nested-$(CONFIG_SLIRP) += slirp.o net-nested-$(CONFIG_VDE) += vde.o net-obj-y += $(addprefix net/, $(net-nested-y)) ###################################################################### # libqemu_common.a: Target independent part of system emulation. The # long term path is to suppress *all* target specific code in case of # system emulation, i.e. a single QEMU executable should support all # CPUs and machines. obj-y = $(block-obj-y) obj-y += $(net-obj-y) obj-y += $(qobject-obj-y) obj-y += readline.o console.o obj-y += tcg-runtime.o host-utils.o obj-y += irq.o ioport.o obj-$(CONFIG_PTIMER) += ptimer.o obj-$(CONFIG_MAX7310) += max7310.o obj-$(CONFIG_WM8750) += wm8750.o obj-$(CONFIG_TWL92230) += twl92230.o obj-$(CONFIG_TSC2005) += tsc2005.o obj-$(CONFIG_LM832X) += lm832x.o obj-$(CONFIG_TMP105) += tmp105.o obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o obj-$(CONFIG_SSD0303) += ssd0303.o obj-$(CONFIG_SSD0323) += ssd0323.o obj-$(CONFIG_ADS7846) += ads7846.o obj-$(CONFIG_MAX111X) += max111x.o obj-$(CONFIG_DS1338) += ds1338.o obj-y += i2c.o smbus.o smbus_eeprom.o obj-y += eeprom93xx.o obj-y += scsi-disk.o cdrom.o obj-y += scsi-generic.o scsi-bus.o obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o obj-y += usb-serial.o usb-net.o usb-bus.o obj-$(CONFIG_SSI) += ssi.o obj-$(CONFIG_SSI_SD) += ssi-sd.o obj-$(CONFIG_SD) += sd.o obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o obj-y += bt-hci-csr.o obj-y += buffered_file.o migration.o migration-tcp.o qemu-sockets.o obj-y += qemu-char.o aio.o savevm.o obj-y += msmouse.o ps2.o obj-y += qdev.o qdev-properties.o obj-y += qemu-config.o block-migration.o obj-$(CONFIG_BRLAPI) += baum.o obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS) audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o audio-obj-$(CONFIG_SDL) += sdlaudio.o audio-obj-$(CONFIG_OSS) += ossaudio.o audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o audio-obj-$(CONFIG_ALSA) += alsaaudio.o audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o audio-obj-$(CONFIG_FMOD) += fmodaudio.o audio-obj-$(CONFIG_ESD) += esdaudio.o audio-obj-$(CONFIG_PA) += paaudio.o audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o audio-obj-y += wavcapture.o obj-y += $(addprefix audio/, $(audio-obj-y)) obj-y += keymaps.o obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o obj-$(CONFIG_CURSES) += curses.o obj-y += vnc.o acl.o d3des.o obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o obj-$(CONFIG_COCOA) += cocoa.o obj-$(CONFIG_IOTHREAD) += qemu-thread.o slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y)) # xen backend driver support obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o QEMU_CFLAGS+=$(CURL_CFLAGS) cocoa.o: cocoa.m keymaps.o: keymaps.c keymaps.h sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS) acl.o: acl.h acl.c vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS) vnc-tls.o: vnc-tls.c vnc.h vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h curses.o: curses.c keymaps.h curses_keys.h bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS) libqemu_common.a: $(obj-y) ###################################################################### qemu-img.o: qemu-img-cmds.h qemu-img$(EXESUF): qemu-img.o qemu-tool.o $(block-obj-y) $(qobject-obj-y) qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o $(block-obj-y) $(qobject-obj-y) qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y) $(qobject-obj-y) qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@") check-qint: check-qint.o qint.o qemu-malloc.o check-qstring: check-qstring.o qstring.o qemu-malloc.o check-qdict: check-qdict.o qdict.o qint.o qstring.o qbool.o qemu-malloc.o qlist.o check-qlist: check-qlist.o qlist.o qint.o qemu-malloc.o check-qfloat: check-qfloat.o qfloat.o qemu-malloc.o check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o qemu-malloc.o clean: # avoid old build problems by removing potentially incorrect old files rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~ rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d rm -f qemu-img-cmds.h $(MAKE) -C tests clean for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser; do \ if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \ done distclean: clean rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi rm -f config-all-devices.mak rm -f roms/seabios/config.mak roms/vgabios/config.mak rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr} for d in $(TARGET_DIRS) libhw32 libhw64 libuser; do \ rm -rf $$d || exit 1 ; \ done KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \ ar de en-us fi fr-be hr it lv nl pl ru th \ common de-ch es fo fr-ca hu ja mk nl-be pt sl tr ifdef INSTALL_BLOBS BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \ video.x openbios-sparc32 openbios-sparc64 openbios-ppc \ pxe-e1000.bin pxe-i82559er.bin \ pxe-ne2k_pci.bin pxe-pcnet.bin \ pxe-rtl8139.bin pxe-virtio.bin \ bamboo.dtb petalogix-s3adsp1800.dtb \ multiboot.bin linuxboot.bin else BLOBS= endif install-doc: $(DOCS) $(INSTALL_DIR) "$(DESTDIR)$(docdir)" $(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)" ifdef CONFIG_POSIX $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" $(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1" $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8" $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8" endif install: all $(if $(BUILD_DOCS),install-doc) $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ifneq ($(TOOLS),) $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)" endif ifneq ($(BLOBS),) $(INSTALL_DIR) "$(DESTDIR)$(datadir)" set -e; for x in $(BLOBS); do \ $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \ done endif $(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps" set -e; for x in $(KEYMAPS); do \ $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \ done for d in $(TARGET_DIRS); do \ $(MAKE) -C $$d $@ || exit 1 ; \ done # various test targets test speed: all $(MAKE) -C tests $@ .PHONY: TAGS TAGS: find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags cscope: rm -f ./cscope.* find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files cscope -b # documentation %.html: %.texi $(call quiet-command,texi2html -I=. -monolithic -number $<," GEN $@") %.info: %.texi $(call quiet-command,makeinfo -I . $< -o $@," GEN $@") %.dvi: %.texi $(call quiet-command,texi2dvi -I . $<," GEN $@") qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@") qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@") qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@") qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi $(call quiet-command, \ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \ pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \ " GEN $@") qemu-img.1: qemu-img.texi qemu-img-cmds.texi $(call quiet-command, \ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \ pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \ " GEN $@") qemu-nbd.8: qemu-nbd.texi $(call quiet-command, \ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \ pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \ " GEN $@") info: qemu-doc.info qemu-tech.info dvi: qemu-doc.dvi qemu-tech.dvi html: qemu-doc.html qemu-tech.html qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi VERSION ?= $(shell cat VERSION) FILE = qemu-$(VERSION) # tar release (use 'make -k tar' on a checkouted tree) tar: rm -rf /tmp/$(FILE) cp -r . /tmp/$(FILE) cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn rm -rf /tmp/$(FILE) # generate a binary distribution tarbin: cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \ $(bindir)/qemu \ $(bindir)/qemu-system-x86_64 \ $(bindir)/qemu-system-arm \ $(bindir)/qemu-system-cris \ $(bindir)/qemu-system-m68k \ $(bindir)/qemu-system-microblaze \ $(bindir)/qemu-system-mips \ $(bindir)/qemu-system-mipsel \ $(bindir)/qemu-system-mips64 \ $(bindir)/qemu-system-mips64el \ $(bindir)/qemu-system-ppc \ $(bindir)/qemu-system-ppcemb \ $(bindir)/qemu-system-ppc64 \ $(bindir)/qemu-system-sh4 \ $(bindir)/qemu-system-sh4eb \ $(bindir)/qemu-system-sparc \ $(bindir)/qemu-i386 \ $(bindir)/qemu-x86_64 \ $(bindir)/qemu-alpha \ $(bindir)/qemu-arm \ $(bindir)/qemu-armeb \ $(bindir)/qemu-cris \ $(bindir)/qemu-m68k \ $(bindir)/qemu-microblaze \ $(bindir)/qemu-mips \ $(bindir)/qemu-mipsel \ $(bindir)/qemu-ppc \ $(bindir)/qemu-ppc64 \ $(bindir)/qemu-ppc64abi32 \ $(bindir)/qemu-sh4 \ $(bindir)/qemu-sh4eb \ $(bindir)/qemu-sparc \ $(bindir)/qemu-sparc64 \ $(bindir)/qemu-sparc32plus \ $(bindir)/qemu-img \ $(bindir)/qemu-nbd \ $(datadir)/bios.bin \ $(datadir)/vgabios.bin \ $(datadir)/vgabios-cirrus.bin \ $(datadir)/ppc_rom.bin \ $(datadir)/video.x \ $(datadir)/openbios-sparc32 \ $(datadir)/openbios-sparc64 \ $(datadir)/openbios-ppc \ $(datadir)/pxe-ne2k_pci.bin \ $(datadir)/pxe-rtl8139.bin \ $(datadir)/pxe-pcnet.bin \ $(datadir)/pxe-e1000.bin \ $(docdir)/qemu-doc.html \ $(docdir)/qemu-tech.html \ $(mandir)/man1/qemu.1 \ $(mandir)/man1/qemu-img.1 \ $(mandir)/man8/qemu-nbd.8 # Include automatically generated dependency files -include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d)