From 0ac32c837507260009d170af15f4ae9652a9ea97 Mon Sep 17 00:00:00 2001 From: bellard Date: Thu, 20 May 2004 12:45:00 +0000 Subject: PCI interrupt support - PCI BIOS interrupt remapping - more accurate memory mapping - 'info pci' monitor command git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@823 c046a42c-6fe2-441c-8c8c-71466251a162 --- hw/pci.c | 543 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 469 insertions(+), 74 deletions(-) (limited to 'hw/pci.c') diff --git a/hw/pci.c b/hw/pci.c index 2c5f30b15..ff5a44efb 100644 --- a/hw/pci.c +++ b/hw/pci.c @@ -25,6 +25,21 @@ //#define DEBUG_PCI +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* just used for simpler irq handling. */ +#define PCI_DEVICES_MAX 64 +#define PCI_IRQ_WORDS ((PCI_DEVICES_MAX + 31) / 32) + typedef struct PCIBridge { uint32_t config_reg; PCIDevice **pci_bus[256]; @@ -32,6 +47,8 @@ typedef struct PCIBridge { static PCIBridge pci_bridge; target_phys_addr_t pci_mem_base; +static int pci_irq_index; +static uint32_t pci_irq_levels[4][PCI_IRQ_WORDS]; /* -1 for devfn means auto assign */ PCIDevice *pci_register_device(const char *name, int instance_size, @@ -42,6 +59,9 @@ PCIDevice *pci_register_device(const char *name, int instance_size, PCIBridge *s = &pci_bridge; PCIDevice *pci_dev, **bus; + if (pci_irq_index >= PCI_DEVICES_MAX) + return NULL; + if (!s->pci_bus[bus_num]) { s->pci_bus[bus_num] = qemu_mallocz(256 * sizeof(PCIDevice *)); if (!s->pci_bus[bus_num]) @@ -62,8 +82,14 @@ PCIDevice *pci_register_device(const char *name, int instance_size, pci_dev->bus_num = bus_num; pci_dev->devfn = devfn; pstrcpy(pci_dev->name, sizeof(pci_dev->name), name); + + if (!config_read) + config_read = pci_default_read_config; + if (!config_write) + config_write = pci_default_write_config; pci_dev->config_read = config_read; pci_dev->config_write = config_write; + pci_dev->irq_index = pci_irq_index++; bus[devfn] = pci_dev; return pci_dev; } @@ -83,30 +109,160 @@ void pci_register_io_region(PCIDevice *pci_dev, int region_num, r->map_func = map_func; } -static void pci_config_writel(void* opaque, uint32_t addr, uint32_t val) +static void pci_addr_writel(void* opaque, uint32_t addr, uint32_t val) { PCIBridge *s = opaque; s->config_reg = val; } -static uint32_t pci_config_readl(void* opaque, uint32_t addr) +static uint32_t pci_addr_readl(void* opaque, uint32_t addr) { PCIBridge *s = opaque; return s->config_reg; } -static void unmap_region(PCIIORegion *r) +static void pci_update_mappings(PCIDevice *d) +{ + PCIIORegion *r; + int cmd, i; + uint32_t last_addr, new_addr; + + cmd = le16_to_cpu(*(uint16_t *)(d->config + PCI_COMMAND)); + for(i = 0; i < 6; i++) { + r = &d->io_regions[i]; + if (r->size != 0) { + if (r->type & PCI_ADDRESS_SPACE_IO) { + if (cmd & PCI_COMMAND_IO) { + new_addr = le32_to_cpu(*(uint32_t *)(d->config + + 0x10 + i * 4)); + new_addr = new_addr & ~(r->size - 1); + last_addr = new_addr + r->size - 1; + /* NOTE: we have only 64K ioports on PC */ + if (last_addr <= new_addr || new_addr == 0 || + last_addr >= 0x10000) { + new_addr = -1; + } + } else { + new_addr = -1; + } + } else { + if (cmd & PCI_COMMAND_MEMORY) { + new_addr = le32_to_cpu(*(uint32_t *)(d->config + + 0x10 + i * 4)); + new_addr = new_addr & ~(r->size - 1); + last_addr = new_addr + r->size - 1; + /* NOTE: we do not support wrapping */ + /* XXX: as we cannot support really dynamic + mappings, we handle specific values as invalid + mappings. */ + if (last_addr <= new_addr || new_addr == 0 || + last_addr == -1) { + new_addr = -1; + } + } else { + new_addr = -1; + } + } + /* now do the real mapping */ + if (new_addr != r->addr) { + if (r->addr != -1) { + if (r->type & PCI_ADDRESS_SPACE_IO) { + int class; + /* NOTE: specific hack for IDE in PC case: + only one byte must be mapped. */ + class = d->config[0x0a] | (d->config[0x0b] << 8); + if (class == 0x0101 && r->size == 4) { + isa_unassign_ioport(r->addr + 2, 1); + } else { + isa_unassign_ioport(r->addr, r->size); + } + } else { + cpu_register_physical_memory(r->addr + pci_mem_base, + r->size, + IO_MEM_UNASSIGNED); + } + } + r->addr = new_addr; + if (r->addr != -1) { + r->map_func(d, i, r->addr, r->size, r->type); + } + } + } + } +} + +uint32_t pci_default_read_config(PCIDevice *d, + uint32_t address, int len) { - if (r->addr == -1) + uint32_t val; + switch(len) { + case 1: + val = d->config[address]; + break; + case 2: + val = le16_to_cpu(*(uint16_t *)(d->config + address)); + break; + default: + case 4: + val = le32_to_cpu(*(uint32_t *)(d->config + address)); + break; + } + return val; +} + +void pci_default_write_config(PCIDevice *d, + uint32_t address, uint32_t val, int len) +{ + int can_write, i; + uint32_t end; + + if (len == 4 && (address >= 0x10 && address < 0x10 + 4 * 6)) { + PCIIORegion *r; + int reg; + + reg = (address - 0x10) >> 2; + r = &d->io_regions[reg]; + if (r->size == 0) + goto default_config; + /* compute the stored value */ + val &= ~(r->size - 1); + val |= r->type; + *(uint32_t *)(d->config + 0x10 + reg * 4) = cpu_to_le32(val); + pci_update_mappings(d); return; -#ifdef DEBUG_PCI - printf("unmap addr=%08x size=%08x\n", r->addr, r->size); -#endif - if (r->type & PCI_ADDRESS_SPACE_IO) { - isa_unassign_ioport(r->addr, r->size); - } else { - cpu_register_physical_memory(r->addr + pci_mem_base, r->size, - IO_MEM_UNASSIGNED); + } + default_config: + /* not efficient, but simple */ + for(i = 0; i < len; i++) { + /* default read/write accesses */ + switch(address) { + case 0x00: + case 0x01: + case 0x02: + case 0x03: + case 0x08: + case 0x09: + case 0x0a: + case 0x0b: + case 0x0e: + case 0x3d: + can_write = 0; + break; + default: + can_write = 1; + break; + } + if (can_write) { + d->config[address] = val; + } + address++; + val >>= 8; + } + + end = address + len; + if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) { + /* if the command register is modified, we must modify the mappings */ + pci_update_mappings(d); } } @@ -115,7 +271,7 @@ static void pci_data_write(void *opaque, uint32_t addr, { PCIBridge *s = opaque; PCIDevice **bus, *pci_dev; - int config_addr, reg; + int config_addr; #if defined(DEBUG_PCI) && 0 printf("pci_data_write: addr=%08x val=%08x len=%d\n", @@ -134,41 +290,11 @@ static void pci_data_write(void *opaque, uint32_t addr, if (!pci_dev) return; config_addr = (s->config_reg & 0xfc) | (addr & 3); - #if defined(DEBUG_PCI) printf("pci_config_write: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, val, len); #endif - if (len == 4 && (config_addr >= 0x10 && config_addr < 0x10 + 4 * 6)) { - PCIIORegion *r; - reg = (config_addr - 0x10) >> 2; - r = &pci_dev->io_regions[reg]; - if (r->size == 0) - goto default_config; - if (val != 0xffffffff && val != 0) { - /* XXX: the memory assignment should be global to handle - overlaps, but it is not needed at this stage */ - /* first unmap the old region */ - unmap_region(r); - /* change the address */ - if (r->type & PCI_ADDRESS_SPACE_IO) - r->addr = val & ~0x3; - else - r->addr = val & ~0xf; -#ifdef DEBUG_PCI - printf("map addr=%08x size=%08x type=%d\n", - r->addr, r->size, r->type); -#endif - r->map_func(pci_dev, reg, r->addr, r->size, r->type); - } - /* now compute the stored value */ - val &= ~(r->size - 1); - val |= r->type; - *(uint32_t *)(pci_dev->config + 0x10 + reg * 4) = cpu_to_le32(val); - } else { - default_config: - pci_dev->config_write(pci_dev, config_addr, val, len); - } + pci_dev->config_write(pci_dev, config_addr, val, len); } static uint32_t pci_data_read(void *opaque, uint32_t addr, @@ -238,28 +364,13 @@ static uint32_t pci_data_readl(void* opaque, uint32_t addr) /* i440FX PCI bridge */ -static uint32_t i440_read_config(PCIDevice *d, - uint32_t address, int len) -{ - uint32_t val; - val = 0; - memcpy(&val, d->config + address, len); - return val; -} - -static void i440_write_config(PCIDevice *d, - uint32_t address, uint32_t val, int len) -{ - memcpy(d->config + address, &val, len); -} - void i440fx_init(void) { PCIBridge *s = &pci_bridge; PCIDevice *d; - register_ioport_write(0xcf8, 4, 4, pci_config_writel, s); - register_ioport_read(0xcf8, 4, 4, pci_config_readl, s); + register_ioport_write(0xcf8, 4, 4, pci_addr_writel, s); + register_ioport_read(0xcf8, 4, 4, pci_addr_readl, s); register_ioport_write(0xcfc, 4, 1, pci_data_writeb, s); register_ioport_write(0xcfc, 4, 2, pci_data_writew, s); @@ -269,7 +380,7 @@ void i440fx_init(void) register_ioport_read(0xcfc, 4, 4, pci_data_readl, s); d = pci_register_device("i440FX", sizeof(PCIDevice), 0, 0, - i440_read_config, i440_write_config); + NULL, NULL); d->config[0x00] = 0x86; // vendor_id d->config[0x01] = 0x80; @@ -282,35 +393,295 @@ void i440fx_init(void) d->config[0x0e] = 0x01; // header_type } -/* NOTE: the following should be done by the BIOS */ +/* PIIX3 PCI to ISA bridge */ + +typedef struct PIIX3State { + PCIDevice dev; +} PIIX3State; + +PIIX3State *piix3_state; + +static void piix3_reset(PIIX3State *d) +{ + uint8_t *pci_conf = d->dev.config; + + pci_conf[0x04] = 0x07; // master, memory and I/O + pci_conf[0x05] = 0x00; + pci_conf[0x06] = 0x00; + pci_conf[0x07] = 0x02; // PCI_status_devsel_medium + pci_conf[0x4c] = 0x4d; + pci_conf[0x4e] = 0x03; + pci_conf[0x4f] = 0x00; + pci_conf[0x60] = 0x80; + pci_conf[0x69] = 0x02; + pci_conf[0x70] = 0x80; + pci_conf[0x76] = 0x0c; + pci_conf[0x77] = 0x0c; + pci_conf[0x78] = 0x02; + pci_conf[0x79] = 0x00; + pci_conf[0x80] = 0x00; + pci_conf[0x82] = 0x00; + pci_conf[0xa0] = 0x08; + pci_conf[0xa0] = 0x08; + pci_conf[0xa2] = 0x00; + pci_conf[0xa3] = 0x00; + pci_conf[0xa4] = 0x00; + pci_conf[0xa5] = 0x00; + pci_conf[0xa6] = 0x00; + pci_conf[0xa7] = 0x00; + pci_conf[0xa8] = 0x0f; + pci_conf[0xaa] = 0x00; + pci_conf[0xab] = 0x00; + pci_conf[0xac] = 0x00; + pci_conf[0xae] = 0x00; +} + +void piix3_init(void) +{ + PIIX3State *d; + uint8_t *pci_conf; + + d = (PIIX3State *)pci_register_device("PIIX3", sizeof(PIIX3State), + 0, -1, + NULL, NULL); + piix3_state = d; + pci_conf = d->dev.config; + + pci_conf[0x00] = 0x86; // Intel + pci_conf[0x01] = 0x80; + pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1) + pci_conf[0x03] = 0x70; + pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA + pci_conf[0x0b] = 0x06; // class_base = PCI_bridge + pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic + + piix3_reset(d); +} + +/***********************************************************/ +/* generic PCI irq support */ + +/* return the global irq number corresponding to a given device irq + pin. We could also use the bus number to have a more precise + mapping. */ +static inline int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num) +{ + int slot_addend; + slot_addend = (pci_dev->devfn >> 3); + return (irq_num + slot_addend) & 3; +} + +/* 0 <= irq_num <= 3. level must be 0 or 1 */ +void pci_set_irq(PCIDevice *pci_dev, int irq_num, int level) +{ + int irq_index, shift, pic_irq, pic_level; + uint32_t *p; + + irq_num = pci_slot_get_pirq(pci_dev, irq_num); + irq_index = pci_dev->irq_index; + p = &pci_irq_levels[irq_num][irq_index >> 5]; + shift = (irq_index & 0x1f); + *p = (*p & ~(1 << shift)) | (level << shift); + + /* now we change the pic irq level according to the piix irq mappings */ + pic_irq = piix3_state->dev.config[0x60 + irq_num]; + if (pic_irq < 16) { + /* the pic level is the logical OR of all the PCI irqs mapped + to it */ + pic_level = 0; +#if (PCI_IRQ_WORDS == 2) + pic_level = ((pci_irq_levels[irq_num][0] | + pci_irq_levels[irq_num][1]) != 0); +#else + { + int i; + pic_level = 0; + for(i = 0; i < PCI_IRQ_WORDS; i++) { + if (pci_irq_levels[irq_num][i]) { + pic_level = 1; + break; + } + } + } +#endif + pic_set_irq(pic_irq, pic_level); + } +} + +/***********************************************************/ +/* monitor info on PCI */ + +static void pci_info_device(PCIDevice *d) +{ + int i, class; + PCIIORegion *r; + + printf(" Bus %2d, device %3d, function %d:\n", + d->bus_num, d->devfn >> 3, d->devfn & 7); + class = le16_to_cpu(*((uint16_t *)(d->config + PCI_CLASS_DEVICE))); + printf(" "); + switch(class) { + case 0x0101: + printf("IDE controller"); + break; + case 0x0200: + printf("Ethernet controller"); + break; + case 0x0300: + printf("VGA controller"); + break; + default: + printf("Class %04x", class); + break; + } + printf(": PCI device %04x:%04x\n", + le16_to_cpu(*((uint16_t *)(d->config + PCI_VENDOR_ID))), + le16_to_cpu(*((uint16_t *)(d->config + PCI_DEVICE_ID)))); + + if (d->config[PCI_INTERRUPT_PIN] != 0) { + printf(" IRQ %d.\n", d->config[PCI_INTERRUPT_LINE]); + } + for(i = 0;i < 6; i++) { + r = &d->io_regions[i]; + if (r->size != 0) { + printf(" BAR%d: ", i); + if (r->type & PCI_ADDRESS_SPACE_IO) { + printf("I/O at 0x%04x [0x%04x].\n", + r->addr, r->addr + r->size - 1); + } else { + printf("32 bit memory at 0x%08x [0x%08x].\n", + r->addr, r->addr + r->size - 1); + } + } + } +} + +void pci_info(void) +{ + PCIBridge *s = &pci_bridge; + PCIDevice **bus; + int bus_num, devfn; + + for(bus_num = 0; bus_num < 256; bus_num++) { + bus = s->pci_bus[bus_num]; + if (bus) { + for(devfn = 0; devfn < 256; devfn++) { + if (bus[devfn]) + pci_info_device(bus[devfn]); + } + } + } +} + +/***********************************************************/ +/* XXX: the following should be moved to the PC BIOS */ + +static uint32_t isa_inb(uint32_t addr) +{ + return cpu_inb(cpu_single_env, addr); +} + +static void isa_outb(uint32_t val, uint32_t addr) +{ + cpu_outb(cpu_single_env, addr, val); +} + +static uint32_t isa_inw(uint32_t addr) +{ + return cpu_inw(cpu_single_env, addr); +} + +static void isa_outw(uint32_t val, uint32_t addr) +{ + cpu_outw(cpu_single_env, addr, val); +} + +static uint32_t isa_inl(uint32_t addr) +{ + return cpu_inl(cpu_single_env, addr); +} + +static void isa_outl(uint32_t val, uint32_t addr) +{ + cpu_outl(cpu_single_env, addr, val); +} + +static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | addr; + pci_data_write(s, 0, val, 4); +} + +static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | (addr & ~3); + pci_data_write(s, addr & 3, val, 2); +} + +static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | (addr & ~3); + pci_data_write(s, addr & 3, val, 1); +} + +static uint32_t pci_config_readl(PCIDevice *d, uint32_t addr) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | addr; + return pci_data_read(s, 0, 4); +} + +static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | (addr & ~3); + return pci_data_read(s, addr & 3, 2); +} + +static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr) +{ + PCIBridge *s = &pci_bridge; + s->config_reg = 0x80000000 | (d->bus_num << 16) | + (d->devfn << 8) | (addr & ~3); + return pci_data_read(s, addr & 3, 1); +} static uint32_t pci_bios_io_addr; static uint32_t pci_bios_mem_addr; +/* host irqs corresponding to PCI irqs A-D */ +static uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr) { - PCIBridge *s = &pci_bridge; PCIIORegion *r; + uint16_t cmd; - s->config_reg = 0x80000000 | (d->bus_num << 16) | - (d->devfn << 8) | (0x10 + region_num * 4); - pci_data_write(s, 0, addr, 4); + pci_config_writel(d, 0x10 + region_num * 4, addr); r = &d->io_regions[region_num]; /* enable memory mappings */ + cmd = pci_config_readw(d, PCI_COMMAND); if (r->type & PCI_ADDRESS_SPACE_IO) - d->config[0x04] |= 1; + cmd |= 1; else - d->config[0x04] |= 2; + cmd |= 2; + pci_config_writew(d, PCI_COMMAND, cmd); } - static void pci_bios_init_device(PCIDevice *d) { int class; PCIIORegion *r; uint32_t *paddr; - int i; + int i, pin, pic_irq; class = d->config[0x0a] | (d->config[0x0b] << 8); switch(class) { @@ -321,6 +692,10 @@ static void pci_bios_init_device(PCIDevice *d) pci_set_io_region_addr(d, 2, 0x170); pci_set_io_region_addr(d, 3, 0x374); break; + case 0x0300: + /* VGA: map frame buffer to default Bochs VBE address */ + pci_set_io_region_addr(d, 0, 0xE0000000); + break; default: /* default memory mappings */ for(i = 0; i < 6; i++) { @@ -337,6 +712,14 @@ static void pci_bios_init_device(PCIDevice *d) } break; } + + /* map the interrupt */ + pin = pci_config_readb(d, PCI_INTERRUPT_PIN); + if (pin != 0) { + pin = pci_slot_get_pirq(d, pin - 1); + pic_irq = pci_irqs[pin]; + pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq); + } } /* @@ -348,11 +731,25 @@ void pci_bios_init(void) { PCIBridge *s = &pci_bridge; PCIDevice **bus; - int bus_num, devfn; + int bus_num, devfn, i, irq; + uint8_t elcr[2]; pci_bios_io_addr = 0xc000; pci_bios_mem_addr = 0xf0000000; + /* activate IRQ mappings */ + elcr[0] = 0x00; + elcr[1] = 0x00; + for(i = 0; i < 4; i++) { + irq = pci_irqs[i]; + /* set to trigger level */ + elcr[irq >> 3] |= (1 << (irq & 7)); + /* activate irq remapping in PIIX */ + pci_config_writeb((PCIDevice *)piix3_state, 0x60 + i, irq); + } + isa_outb(elcr[0], 0x4d0); + isa_outb(elcr[1], 0x4d1); + for(bus_num = 0; bus_num < 256; bus_num++) { bus = s->pci_bus[bus_num]; if (bus) { @@ -363,5 +760,3 @@ void pci_bios_init(void) } } } - - -- cgit v1.2.3