aboutsummaryrefslogtreecommitdiffstats
path: root/net.h
AgeCommit message (Collapse)AuthorFilesLines
2009-06-09net: add qemu_send_packet_async()Mark McLoughlin1-0/+8
Add a qemu_send_packet() variant which will queue up the packet if it cannot be sent when all client queues are full. It later invokes the supplied callback when the packet has been sent. If qemu_send_packet_async() returns zero, the caller is expected to not send any more packets until the queued packet has been sent. Packets are queued iff a receive() handler returns zero (indicating queue full) and the caller has provided a sent notification callback (indicating it will stop and start its own queue). We need the packet sending API to support queueing because: - a sending client should process all available packets in one go (e.g. virtio-net emptying its tx ring) - a receiving client may not be able to handle the packet (e.g. -EAGAIN from write() to tapfd) - the sending client could detect this condition in advance (e.g. by select() for writable on tapfd) - that's too much overhead (e.g. a select() call per packet) - therefore the sending client must handle the condition by dropping the packet or queueing it - dropping packets is poor form; we should queue. However, we don't want queueing to be completely transparent. We want the sending client to stop sending packets as soon as a packet is queued. This allows the sending client to be throttled by the receiver. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin1-1/+1
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin1-3/+3
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin1-11/+12
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin1-2/+4
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: Improve parameter error reportingJan Kiszka1-1/+1
As host network devices can also be instantiated via the monitor, errors should then be reported to the related monitor instead of stderr. This requires larger refactoring, so this patch starts small with introducing a helper to catch both cases and convert net_client_init as well as net_slirp_redir. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-27User Networking: Enable removal of redirectionsAlexander Graf1-1/+1
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14PCI network qdev conversionPaul Brook1-0/+7
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-21slirp: Enhance host-guest redirection setup (Jan Kiszka)aliguori1-1/+1
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Untangle nested qemu_send_packet (Jan Kiszka)aliguori1-0/+11
Queue packets that are send during an ongoing packet delivery. This ensures that packets will always arrive in their logical order at each client of a VLAN. Currently, slirp generates such immediate relies, and e.g. packet-sniffing clients on the same VLAN may get confused. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori1-0/+3
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori1-4/+4
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)aliguori1-0/+2
Add monitor command to hot-add PCI devices (nic and storage). Syntax is: pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params It returns the domain, bus and slot for the newly added device on success. It is possible to attach a disk to a device after PCI initialization via the drive_add command. If so, a manual scan of the SCSI bus on the guest is necessary. Save QEMUMachine necessary for drive_init. Add monitor command to hot-remove devices, remove device data on _EJ0 notification. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: add net_client_uninit / qemu_find_vlan_client (Marcelo Tosatti)aliguori1-0/+2
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6600 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: dynamic nic info index allocation (Marcelo Tosatti)aliguori1-0/+1
Dynamically allocate nic info index, so to reuse indexes when devices are removed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6595 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)aliguori1-0/+1
Change the PCI network drivers init functions to return the PCIDev, to inform which slot has been hot-plugged. Also record PCIDevice structure on NICInfo to locate for release on hot-removal. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Add qemu_check_nic_model() and qemu_check_nic_model_list() (Mark McLoughlin)aliguori1-0/+3
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6281 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Allow devices be notified of link status change (Mark McLoughlin)aliguori1-0/+3
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6248 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add 'set_link' monitor command (Mark McLoughlin)aliguori1-0/+2
Add a monitor command to setting a given network device's link status to 'up' or 'down'. Allows simulation of network cable disconnect. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6247 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori1-0/+2
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori1-0/+1
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Assign a name to each VLAN client (Mark McLoughlin)aliguori1-0/+1
Automatically assign a name to each vlan client based on its model, e.g. e1000.0, tap.3 or vde.1. This name is intended to be used by the forthcoming 'set_link' monitor command. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6217 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori1-0/+2
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18consolidate definition for tap script and smb supportaurel321-0/+8
Since the introduction of net.c in r5581 there had been 2 places where the location of the TAP helper scripts and SMB daemon are defined. The following patch move those definitions to net.h so they are accessible for net.c and vl.c but defined only once (Carlo Marcelo Arenas Belon) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6093 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17virtio-net supportaliguori1-0/+7
This adds virtio-net support. This is based on the virtio-net driver that exists in kvm-userspace. This also adds a new qemu_sendv_packet which virtio-net requires. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6073 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Move network redirection code out of vl.c and into net.caliguori1-0/+9
Mostly code motion. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5581 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-28Add a "null" bluetooth HCI and a header file for bluetooth.balrog1-0/+14
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5342 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-29Add IP checksumming functions to qemu (Gerd Hoffmann)aliguori1-0/+7
This can be shared between the e1000, virtio-net, and xennet. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4971 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-17Remove the NIC from vlan on usb destroy.balrog1-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4885 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-0/+50
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-22 17:16:01 +0000