aboutsummaryrefslogtreecommitdiffstats
path: root/ioport.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-29ioport: change portio_list not to use memory_region_set_offset()Avi Kivity1-7/+21
memory_region_set_offset() will be going away soon, so don't use it. Use an alias instead. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2011-10-11Introduce PortioListAvi Kivity1-0/+108
Add a type and methods for manipulating a list of disjoint I/O ports, used in some older hardware devices. Based on original patch by Richard Henderson. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-29ioport: register ranges by byte aligned addresses alwaysAvi Kivity1-2/+2
The I/O port space is byte addressable, even for word and long accesses. An example is the VMware svga card, which has long ports on offsets 0, 1, and 2. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23report serial devices created with -device in the PIIX4 config spacePaolo Bonzini1-6/+13
Serial and parallel devices created with -device are not reported in the PIIX4 configuration space, and are hence not picked up by the DSDT. This upsets Windows, which hides them altogether from the guest. To avoid this, check at the end of machine initialization whether the corresponding I/O ports have been registered. The new function in ioport.c does this; this also requires a tweak to isa_unassign_ioport. I left the comment in piix4_pm_initfn since the registers I moved do seem to match the 82371AB datasheet. There are some quirks though. We are setting this bit: "Device 8 EIO Enable (EIO_EN_DEV8)—R/W. 1=Enable PCI access to the device 8 enabled I/O ranges to be claimed by PIIX4 and forwarded to the ISA/EIO bus. 0=Disable. The LPT_MON_EN must be set to enable the decode." but not LPT_MON_EN (bit 18 at 50h): LPT Port Enable (LPT_MON_EN)—R/W. 1=Enable accesses to parallel port address range (LPT_DEC_SEL) to generate a device 8 (parallel port) decode event. 0=Disable. We're also setting the LPT_DEC_SEL field (that's the 0x60 written to 63h) to 11, which means reserved, rather than to 01 (378h-37Fh). Likewise we're not setting SA_MON_EN, SB_MON_EN (respectively bit 14 and bit 16 at address 50h) for the serial ports. However, we're setting COMA_DEC_SEL and COMB_DEC_SEL correctly, unlike the corresponding register for the parallel port. All these fields are left as they are, since they are probably only meant to be used in the DSDT. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-06ioport: Improve error outputAndreas Färber1-2/+4
When failing due to conflicting I/O port registrations, include the offending I/O port address in the message. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-11-21Type-safe ioport callbacksAvi Kivity1-0/+64
The current ioport callbacks are not type-safe, in that they accept an "opaque" pointer as an argument whose type must match the argument to the registration function; this is not checked by the compiler. This patch adds an alternative that is type-safe. Instead of an opaque argument, both registation and the callback use a new IOPort type. The callback then uses container_of() to access its main structures. Currently the old and new methods exist side by side; once the old way is gone, we can also save a bunch of memory since the new method requires one pointer per ioport instead of 6. Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-09-09trace: Trace port IOPrerna Saxena1-0/+7
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-9/+9
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-9/+9
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20ioports: remove unused env parameter and compile only onceBlue Swirl1-6/+6
The CPU state parameter is not used, remove it and adjust callers. Now we can compile ioport.c once for all targets. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-06Make ioport default tables constBlue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-24Unbreak large mem support by removing kqemuAnthony Liguori1-24/+0
kqemu introduces a number of restrictions on the i386 target. The worst is that it prevents large memory from working in the default build. Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on the TSC as a time source which will not be reliable on a multiple processor system in userspace. Since most modern processors are multicore, this severely limits the utility of kqemu. kvm is a viable alternative for people looking to accelerate qemu and has the benefit of being supported by the upstream Linux kernel. If someone can implement work arounds to remove the restrictions introduced by kqemu, I'm happy to avoid and/or revert this patch. N.B. kqemu will still function in the 0.11 series but this patch removes it from the 0.12 series. Paul, please Ack or Nack this patch. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16ioport: use uint{32, 16, 8}_t for ioport value and pio_addr_t for ioport ↵Isaku Yamahata1-19/+18
address. Using int for cpu_{in, out}[bwl] is inconsistent with other part because for address or value, uintN_t is used by other qemu part. At least, softmmu, CPU{Read, Write}MemoryFunc, pci, target_phys_addr_t and the callers of cpu_{in, out}[bwl](). This patch removes the inconsistency. IO port has its own address space so define pio_addr_t as uint32_t because PCI io space width is 32bit. And use uint{32, 16, 8}_t for ioport value. Changing signedness of value might cause subtle issue. However only a suspicious caller is kvm_handle_io() which is ok. And other callers pass unsigned value in the first place. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Stuart Brady <sdbrady@ntlworld.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Samuel Thibault <samuel.thibault@gnu.org> Cc: Tristan Gingold <gingold@adacore.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16ioport: remove some #ifdef DEBUG_UNUSED_IOPORT.Isaku Yamahata1-12/+12
remove some #ifdef DEBUG_UNUSED_IOPORT in ioport.c and use PRIx32 where appropriate Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09ioport: consolidate duplicated logic in register_ioport_{read, write}().Isaku Yamahata1-14/+16
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09use constant IOPORTS_MASK instead of 0xffff.Isaku Yamahata1-2/+2
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09split out ioport related stuffs from vl.c into ioport.c.Isaku Yamahata1-0/+258
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>