aboutsummaryrefslogtreecommitdiffstats
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2011-04-04lm32: add Milkymist AC97 supportMichael Walle1-0/+335
This patch adds support for the Milkymist AC97 compatible sound output and input core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04Revert "ioapic: when switches to level trigger mode, interrupts raised ↵Aurelien Jarno1-1/+0
repeatedly." This reverts commit 9bcfc7daabb138b0fe3d64d74892942d482e5bbd.
2011-04-04s390x: fix s390-virtio-serialAlexander Graf2-5/+5
Commit 6b331efb733a0f913ddc0b7762a1307dec304061 broke the s390 proxy version of virtio-serial by only taking its PCI brother into account. So let's adjust s390-virtio-serial the same way as its PCI counterpart, making it compile and work again. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04virtio: use generic name when possibleAlexander Graf2-0/+5
We have two different virtio buses: pci and s390. The abstraction path taken in qemu is to have generic aliases for each device type in the architecture specific qdev devices. So let's make use of these aliases whenever we can and define them whenever we can. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04w32: Fix compilation (wrong include file)Stefan Weil1-2/+1
arpa/inet.h is not available for w32, so commit edbb21363fbfe40e050f583df921484cbc31c79d breaks w32 compilations. This is fixed by using qemu_socket.h. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04e1000: Mask out lower bits of RDBAL/TDBALKevin Wolf1-3/+18
Rx and Tx descriptors are 16 byte aligned, so the lower bits are ignored by real hardware. In fact, they always read back as zero on real hardware, but probably nobody relies on that. Signed-off-by: Kevin Wolf <mail@kevin-wolf.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03ioapic: when switches to level trigger mode, interrupts raised repeatedly.Isaku Yamahata1-0/+1
- the trigger mode is edge at first - During initializatoin, the interrupt is raised as edge which is masked. The corresponding bit of irr is set. - Then the mode is switched to level and it's unmasked. - the bit of irr is set, so the interrupt is raised repeatedly by ioapic_service(). - OS considers that the irq line is broken and falls back to polling mode. This patch fixes the issues. After raising edige, clear the bit of irr. > Bringing up interface eth0: > Determining IP information for eth0...irq 18: nobody cared (try booting with the "irqpoll" option) > Pid: 4126, comm: ip Not tainted 2.6.38-rc7 #1 > Call Trace: > <IRQ> [<ffffffff8105b009>] ? __report_bad_irq+0x38/0x87 > [<ffffffff8105b177>] ? note_interrupt+0x11f/0x188 > [<ffffffff8105bacf>] ? handle_fasteoi_irq+0xa7/0xd1 > [<ffffffff810046ff>] ? handle_irq+0x83/0x8c > [<ffffffff81003eb9>] ? do_IRQ+0x48/0xaf > [<ffffffff81300513>] ? ret_from_intr+0x0/0xe > [<ffffffff81031ab8>] ? __do_softirq+0x4f/0x114 > [<ffffffff81002d6c>] ? call_softirq+0x1c/0x28 > [<ffffffff81004647>] ? do_softirq+0x33/0x68 > [<ffffffff810316fb>] ? irq_exit+0x36/0x38 > [<ffffffff81015f2c>] ? smp_apic_timer_interrupt+0x88/0x96 > [<ffffffff81002853>] ? apic_timer_interrupt+0x13/0x20 > <EOI> [<ffffffff810177ed>] ? __ioapic_set_affinity+0x68/0x7c > [<ffffffff813000f0>] ? _raw_spin_unlock_irqrestore+0x8/0xa > [<ffffffff8105a84f>] ? __setup_irq+0x224/0x2cb > [<ffffffff8120e3c5>] ? e1000_intr+0x0/0x103 > [<ffffffff8105a9c7>] ? request_threaded_irq+0xd1/0x114 > [<ffffffff8120e396>] ? e1000_request_irq+0x34/0x63 > [<ffffffff8121237d>] ? e1000_open+0x81/0x11f > [<ffffffff8129097c>] ? call_netdevice_notifiers+0x45/0x4a > [<ffffffff81290d8d>] ? __dev_open+0x97/0xc4 > [<ffffffff8128e9c5>] ? __dev_change_flags+0xb9/0x13d > [<ffffffff81290cc1>] ? dev_change_flags+0x1c/0x51 > [<ffffffff812d0542>] ? devinet_ioctl+0x26e/0x594 > [<ffffffff812d174c>] ? inet_ioctl+0x92/0xaa > [<ffffffff81281d75>] ? T.1003+0x13/0x32 > [<ffffffff81282152>] ? sock_ioctl+0x1f2/0x1ff > [<ffffffff810ae2d3>] ? do_vfs_ioctl+0x498/0x4e7 > [<ffffffff81281203>] ? sock_alloc_file+0xb3/0x115 > [<ffffffff8109f79f>] ? fd_install+0x31/0x5d > [<ffffffff810ae364>] ? sys_ioctl+0x42/0x65 > [<ffffffff81001f3b>] ? system_call_fastpath+0x16/0x1b > handlers: > [<ffffffff8120e3c5>] (e1000_intr+0x0/0x103) > Disabling IRQ #18 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03hw/vexpress.c: Add model of ARM Versatile Express boardPeter Maydell1-0/+224
Add a model of the ARM Versatile Express board (with A9MPx4 daughterboard). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01ccid: add ccid-card-emulated deviceAlon Levy1-0/+595
This devices uses libcacard (internal) to emulate a smartcard conforming to the CAC standard. It attaches to the usb-ccid bus. Usage instructions (example command lines) are in the following patch in docs/ccid.txt. It uses libcacard which uses nss, so it can work with both hw cards and certificates (files). Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v20->v21: (Jes Sorenson review) * cosmetics * use qemu-thread and qemu_malloc/qemu_free changes from v19->v20: * checkpatch.pl changes from v18->v19: * add qdev.desc * backend: drop the enumeration property, back to using a string one. changes from v16->v17: * use PROP_TYPE_ENUM for backend changes from v15->v16: * fix error reporting in initfn * bump copyright year * update copyright license changes from v1: * remove stale comments, use only c-style comments * bugfix, forgot to set recv_len * change reader name to 'Virtual Reader'
2011-04-01ccid: add passthru card deviceAlon Levy1-0/+340
The passthru ccid card is a device sitting on the usb-ccid bus and using a chardevice to communicate with a remote device using the VSCard protocol defined in libcacard/vscard_common.h Usage docs available in following patch in docs/ccid.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- Changes from v23->v24: * fixed double license line in header. Changes from v20->v21: (Jes Sorensen review) * add reference to COPYING in header * long comment reformatting Changes from v19->v20: * checkpatch.pl Changes from v18->v19: * add qdev.desc * remove .qdev.unplug (no hot unplug support for ccid bus) Changes from v16->v17: * fix wrong cast when receiving VSC_Error * ccid-card-passthru: force chardev user wakeup by sending Init see lengthy comment below. Changes from v15->v16: Behavioral changes: * return correct size * return error instead of assert if client sent too large ATR * don't assert if client sent too large a size, but add asserts for indices to buffer * reset vscard_in indices on chardev disconnect * handle init from client * error if no chardev supplied * use ntoh, hton * eradicate reader_id_t * remove Reconnect usage (removed from VSCARD protocol) * send VSC_SUCCESS on card insert/remove and reader add/remove Style fixes: * width of line fix * update copyright * remove old TODO's * update file header comment * use macros for debug levels * c++ style comment replacement * update copyright license * fix ATR size comment * fix whitespace in struct def * fix DPRINTF prefix * line width fix ccid-card-passthru: force chardev user wakeup by sending Init The problem: how to wakeup the user of the smartcard when the smartcard device is initialized? Long term solution: have a callback interface. This was done via the deprecated so called chardev ioctl interface. Short term solution: do a write. Specifically we write an Init message. And we change the client to send it's own Init message regardless of receiving this one. Additional Init messages will be regarded as acceptable, the first one received after connection establishment is the determining one wrt capabilities.
2011-04-01usb-ccid: add CCID busAlon Levy2-0/+1478
A CCID device is a smart card reader. It is a USB device, defined at [1]. This patch introduces the usb-ccid device that is a ccid bus. Next patches will introduce two card types to use it, a passthru card and an emulated card. [1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110. Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v20->v21: (Jes Sorenson review) * cosmetic changes - fix multi line comments. * reorder fields in USBCCIDState * add reference to COPYING * add --enable-smartcard and --disable-smartcard here (moved from last patch) changes from v19->v20: * checkpatch.pl changes from v18->v19: * merged: ccid.h: add copyright, fix define and remove non C89 comments * add qdev.desc changes from v15->v16: Behavioral changes: * fix abort on client answer after card remove * enable migration * remove side affect code from asserts * return consistent self-powered state * mask out reserved bits in ccid_set_parameters * add missing abRFU in SetParameters (no affect on linux guest) whitefixes / comments / consts defines: * remove stale comment * remove ccid_print_pending_answers if no DEBUG_CCID * replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines * use error_report * update copyright (most of the code is not original) * reword known bug comment * add missing closing quote in comment * add missing whitespace on one line * s/CCID_SetParameter/CCID_SetParameters/ * add comments * use define for max packet size Comment for "return consistent self-powered state": the Configuration Descriptor bmAttributes claims we are self powered, but we were returning not self powered to USB_REQ_GET_STATUS control message. In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64 guest (not tested on other guests), unless you issue lsusb -v as root (for example).
2011-04-01hw/versatilepb, realview: Fix condition for instantiation of onboard NICPeter Maydell2-3/+3
Correct the condition determining whether we instantiate the onboard NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken in two ways: (1) if the user asked for two default NICs ("-net nic -net nic") we would crash trying to strcmp() a NULL pointer (2) if the user asked for two NICs explicitly of the same model as the onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111") we would try to instantiate two onboard NICs at the same address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01pcnet: Fix sign extension: make ipxe work with >2G RAMMichael Brown1-15/+15
The problem is with definitions in hw/pcnet.c such as: #define CSR_CRDA(S) ((S)->csr[28] | ((S)->csr[29] << 16)) "(S)->csr[29]" is a uint16_t, but "(S)->csr[29] << 16" gets promoted to int, so the overall CSR_CRDA(s) is a (signed) int rather than a uint32_t. This then gets assigned to a uint64_t using target_phys_addr_t crda = CSR_CRDA(s); so when (S)->csr[29] has the high bit set, we end up with crda=0xffffffffxxxxxxxx. From: Michael Brown <mcb30@ipxe.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01lsi53c895a: add support for ABORT messagesBernhard Kohl1-0/+57
If these messages are not handled correctly the guest driver may hang. Always mandatory: - ABORT - BUS DEVICE RESET Mandatory if tagged queuing is implemented (which disks usually do): - ABORT TAG - CLEAR QUEUE Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01fix build errors when we enable acpi_piix4 debugWen Congyang1-2/+3
I enable acpi_piix4 debug, and got the following build errors: # make CC libhw64/acpi_piix4.o cc1: warnings being treated as errors /home/wency/source/qemu/hw/acpi_piix4.c: In function ‘pm_ioport_write’: /home/wency/source/qemu/hw/acpi_piix4.c:193: error: format ‘%04x’ expects type ‘unsigned int’, but argument 2 has type ‘uint64_t’ /home/wency/source/qemu/hw/acpi_piix4.c:193: error: format ‘%04x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’ /home/wency/source/qemu/hw/acpi_piix4.c: In function ‘pm_ioport_read’: /home/wency/source/qemu/hw/acpi_piix4.c:219: error: format ‘%04x’ expects type ‘unsigned int’, but argument 2 has type ‘uint64_t’ make[1]: *** [acpi_piix4.o] Error 1 make: *** [subdir-libhw64] Error 2 Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01Add SLOF-based partition firmware for pSeries machine, allowing more boot ↵David Gibson2-4/+109
options Currently, the emulated pSeries machine requires the use of the -kernel parameter in order to explicitly load a guest kernel. This means booting from the virtual disk, cdrom or network is not possible. This patch addresses this limitation by inserting a within-partition firmware image (derived from the "SLOF" free Open Firmware project). If -kernel is not specified, qemu will now load the SLOF image, which has access to the qemu boot device list through the device tree, and can boot from any of the usual virtual devices. In order to support the new firmware, an extension to the emulated machine/hypervisor is necessary. Unlike Linux, which expects multi-CPU entry to be handled kexec() style, the SLOF firmware expects only one CPU to be active at entry, and to use a hypervisor RTAS method to enable the other CPUs one by one. This patch also implements this 'start-cpu' method, so that SLOF can start the secondary CPUs and marshal them into the kexec() holding pattern ready for entry into the guest OS. Linux should, and in the future might directly use the start-cpu method to enable initially disabled CPUs, but for now it does require kexec() entry. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement PAPR VPA functions for pSeries shared processor partitionsDavid Gibson2-1/+193
Shared-processor partitions are those where a CPU is time-sliced between partitions, rather than being permanently dedicated to a single partition. qemu emulated partitions, since they are just scheduled with the qemu user process, behave mostly like shared processor partitions. In order to better support shared processor partitions (splpar), PAPR defines the "VPA" (Virtual Processor Area), a shared memory communication channel between the hypervisor and partitions. There are also two additional shared memory communication areas for specialized purposes associated with the VPA. A VPA is not essential for operating an splpar, though it can be necessary for obtaining accurate performance measurements in the presence of runtime partition switching. Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE, hypercall, which allows a partition OS to give up it's shared processor timeslices to other partitions when idle. This patch implements the VPA and H_CEDE hypercalls in qemu. We don't implement any of the more advanced statistics which can be communicated through the VPA. However, this is enough to make normal pSeries kernels do an effective power-save idle on an emulated pSeries, significantly reducing the host load of a qemu emulated pSeries running an idle guest OS. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Add a PAPR TCE-bypass mechanism for the pSeries machineBen Herrenschmidt2-0/+87
Usually, PAPR virtual IO devices use a virtual IOMMU mechanism, TCEs, to mediate all DMA transfers. While this is necessary for some sorts of operation, it can be complex to program and slow for others. This patch implements a mechanism for bypassing TCE translation, treating "IO" addresses as plain (guest) physical memory addresses. This has two main uses: * Simple, but 64-bit aware programs like firmwares can use the VIO devices without the complexity of TCE setup. * The guest OS can optionally use the TCE bypass to improve performance in suitable situations. The mechanism used is a per-device flag which disables TCE translation. The flag is toggled with some (hypervisor-implemented) RTAS methods. Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement PAPR virtual SCSI interface (ibmvscsi)Ben Herrenschmidt5-0/+1455
This patch implements the infrastructure and hypercalls necessary for the PAPR specified Virtual SCSI interface. This is the normal method for providing (virtual) disks to PAPR partitions. Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement PAPR CRQ hypercallsBen Herrenschmidt3-1/+173
This patch implements the infrastructure and hypercalls necessary for the PAPR specified CRQ (Command Request Queue) mechanism. This general request queueing system is used by many of the PAPR virtual IO devices, including the virtual scsi adapter. Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement sPAPR Virtual LAN (ibmveth)David Gibson3-0/+543
This patch implements the PAPR specified Inter Virtual Machine Logical LAN; that is the virtual hardware used by the Linux ibmveth driver. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement TCE translation for sPAPR VIODavid Gibson3-1/+272
This patch implements the necessary infrastructure and hypercalls for sPAPR's TCE (Translation Control Entry) IOMMU mechanism. This is necessary for all virtual IO devices which do DMA (i.e. nearly all of them). Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Add (virtual) interrupt to PAPR virtual tty deviceDavid Gibson3-4/+16
Now that we have implemented the PAPR "xics" virtualized interrupt controller, we can add interrupts in PAPR VIO devices. This patch adds interrupt support to the PAPR virtual tty/console device. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Add PAPR H_VIO_SIGNAL hypercall and infrastructure for VIO interruptsDavid Gibson3-1/+44
This patch adds infrastructure to support interrupts from PAPR virtual IO devices. This includes correctly advertising those interrupts in the device tree, and implementing the H_VIO_SIGNAL hypercall, used to enable and disable individual device interrupts. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement the PAPR (pSeries) virtualized interrupt controller (xics)David Gibson4-0/+554
PAPR defines an interrupt control architecture which is logically divided into ICS (Interrupt Control Presentation, each unit is responsible for presenting interrupts to a particular "interrupt server", i.e. CPU) and ICS (Interrupt Control Source, each unit responsible for one or more hardware interrupts as numbered globally across the system). All PAPR virtual IO devices expect to deliver interrupts via this mechanism. In Linux, this interrupt controller system is handled by the "xics" driver. On pSeries systems, access to the interrupt controller is virtualized via hypercalls and RTAS methods. However, the virtualized interface is very similar to the underlying interrupt controller hardware, and similar PICs exist un-virtualized in some other systems. This patch implements both the ICP and ICS sides of the PAPR interrupt controller. For now, only the hypercall virtualized interface is provided, however it would be relatively straightforward to graft an emulated register interface onto the underlying interrupt logic if we want to add a machine with a hardware ICS/ICP system in the future. There are some limitations in this implementation: it is assumed for now that only one instance of the ICS exists, although a full xics system can have several, each responsible for a different group of hardware irqs. ICP/ICS can handle both level-sensitve (LSI) and message signalled (MSI) interrupt inputs. For now, this implementation supports only MSI interrupts, since that is used by PAPR virtual IO devices. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement assorted pSeries hcalls and RTAS methodsDavid Gibson3-1/+80
This patch adds several small utility hypercalls and RTAS methods to the pSeries platform emulation. Specifically: * 'display-character' rtas call This just prints a character to the console, it's occasionally used for early debug of the OS. The support includes a hack to make this RTAS call respond on the normal token value present on real hardware, since some early debugging tools just assume this value without checking the device tree. * 'get-time-of-day' rtas call This one just takes the host real time, converts to the PAPR described format and returns it to the guest. * 'power-off' rtas call This one shuts down the emulated system. * H_DABR hypercall On pSeries, the DABR debug register is usually a hypervisor resource and virtualized through this hypercall. If the hypercall is not present, Linux will under some circumstances attempt to manipulate the DABR directly which will fail on this emulated machine. This stub implementation is enough to stop that behaviour, although it doesn't actually implement the requested DABR operations as yet. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement hcall based RTAS for pSeries machinesDavid Gibson4-11/+222
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time Abstraction Services), a runtime component of the firmware which implements a number of low-level, infrequently used operations. On logical partitions under a hypervisor, many of the RTAS functions require hypervisor privilege. For simplicity, therefore, hypervisor systems typically implement the in-partition RTAS as just a tiny wrapper around a hypercall which actually implements the various RTAS functions. This patch implements such a hypercall based RTAS for our emulated pSeries machine. A tiny in-partition "firmware" calls a new hypercall, which looks up available RTAS services in a table. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Virtual hash page table handling on pSeries machineDavid Gibson2-4/+285
On pSeries logical partitions, excepting the old POWER4-style full system partitions, the guest does not have direct access to the hardware page table. Instead, the pagetable exists in hypervisor memory, and the guest must manipulate it with hypercalls. However, our current pSeries emulation more closely resembles the old style where the guest must set up and handle the pagetables itself. This patch converts it to act like a modern partition. This involves two things: first, the hash translation path is modified to permit the has table to be stored externally to the emulated machine's RAM. The pSeries machine init code configures the CPUs to use this mode. Secondly, we emulate the PAPR hypercalls for manipulating the external hashed page table. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement the bus structure for PAPR virtual IODavid Gibson5-18/+447
This extends the "pseries" (PAPR) machine to include a virtual IO bus supporting the PAPR defined hypercall based virtual IO mechanisms. So far only one VIO device is provided, the vty / vterm, providing a full console (polled only, for now). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Start implementing pSeries logical partition machineDavid Gibson3-0/+611
This patch adds a "pseries" machine to qemu. This aims to emulate a logical partition on an IBM pSeries machine, compliant to the "PowerPC Architecture Platform Requirements" (PAPR) document. This initial version is quite limited, it implements a basic machine and PAPR hypercall emulation. So far only one hypercall is present - H_PUT_TERM_CHAR - so that a (write-only) console is available. Multiple CPUs are permitted, with SMP entry handled kexec() style. The machine so far more resembles an old POWER4 style "full system partition" rather than a modern LPAR, in that the guest manages the page tables directly, rather than via hypercalls. The machine requires qemu to be configured with --enable-fdt. The machine can (so far) only be booted with -kernel - i.e. no partition firmware is provided. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Add POWER7 support for ppcDavid Gibson2-0/+36
This adds emulation support for the recent POWER7 cpu to qemu. It's far from perfect - it's missing a number of POWER7 features so far, including any support for VSX or decimal floating point instructions. However, it's close enough to boot a kernel with the POWER7 PVR. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-03-28vhost: fix dirty page handlingMichael S. Tsirkin1-1/+3
vhost was passing a physical address to cpu_physical_memory_set_dirty, which is wrong: we need to translate to ram address first. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Note: this lead to crashes during migration, so the patch is needed on the stable branch too.
2011-03-28virtio-serial: don't crash on invalid inputMichael S. Tsirkin1-0/+3
Fix crash on invalid input in virtio-serial. Discovered by code review, untested. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-28e1000: check buffer availabilityMichael S. Tsirkin1-8/+8
Reduce spurious packet drops on RX ring empty by verifying that we have at least 1 buffer ahead of the time. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-28virtio-pci: fix bus master work around on loadMichael S. Tsirkin2-7/+7
Commit c81131db15dd1844d0db1d51f3cd7a105cfd2cf3 detects old guests by comparing virtio and PCI status. It attempts to do this on load, as well, but load_config callback in a binding is invoked too early and so the virtio status isn't set yet. We could add yet another callback to the binding, to invoke after load, but it seems easier to reuse the existing vmstate callback. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de>
2011-03-28pci: use uint8_t for devfn_minIsaku Yamahata3-7/+7
use uint8_t for devfn_min instead of int. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-28pci: use PCI_DEVFN in pci_get_bus_devfn()Isaku Yamahata1-1/+1
Replace hardcoded logic by a common macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-28pci: use devfn for pci_find_device() instead of (slot, fn) pairIsaku Yamahata5-8/+8
(slot, fn) pair is somewhat confusing because of ARI. So use devfn for pci_find_device() instead of (slot, fn). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-28pci: replace the magic, 256, for the maximum of devfnIsaku Yamahata2-1/+2
Introduce symbol PCI_SLOT_MAX for the # of slots, and replace the magic, 256. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-26rtl8139: add vlan tag insertionBenjamin Poirier1-15/+60
Add support to the emulated hardware to insert vlan tags in packets going from the guest to the network. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: add vlan tag extractionBenjamin Poirier1-14/+52
Add support to the emulated hardware to extract vlan tags in packets going from the network to the guest. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> -- AFAIK, extraction is optional to get vlans working. The driver requests rx detagging but should not assume that it was done. Under Linux, the mac layer will catch the vlan ethertype. I only added this part for completeness (to emulate the hardware more truthfully...) Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: cleanup FCS calculationBenjamin Poirier1-17/+3
clean out ifdef's around ethernet checksum calculation Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Acked-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-24Merge remote branch 'amit/for-anthony' into stagingAnthony Liguori6-27/+47
2011-03-22vmmouse: Register vmstate via qdevJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-22vmmouse: Fix initializationJan Kiszka1-0/+1
Latest refactorings left vmmouse nonfunctional behind. Fix it by adding the required device initialization. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-22fix applesmc REV keyRené Rebe1-1/+1
Fix applesmc REV key string literal hex encoding. Signed-off-by: René Rebe <rene@exactcode.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21e1000: Fix multi-descriptor packet checksum offloadStefan Hajnoczi1-1/+3
The PCI/PCI-X Family of Gigabit Ethernet Controllers Software Developer’s Manual states the following about the POPTS field: Provides a number of options which control the handling of this packet. This field is ignored except on the first data descriptor of a packet. The current implementation always loads the field and its checksum offload flags. This patch uses only the first descriptor's POPTS field in order to comply with the specification. When Solaris sends multi-descriptor packets it fills in POPTS for the first descriptor only. Therefore this patch is necessary in order to perform checksum offload correctly for multi-descriptor packets. Reported-by: Daniel Pecka <dpecka@techniservit.cz> Reported-by: Gabriele A. Trombetti <gabriele.trombetti@itb.cnr.it> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21Merge branch 'for-anthony' of git://github.com/bonzini/qemuAurelien Jarno60-272/+272
* 'for-anthony' of git://github.com/bonzini/qemu: remove qemu_get_clock add a generic scaling mechanism for timers change all other clock references to use nanosecond resolution accessors change all rt_clock references to use millisecond resolution accessors add more helper functions with explicit milli/nanosecond resolution
2011-03-21Merge branch 'for-anthony' of git://repo.or.cz/qemu/kevinAurelien Jarno2-14/+29
* 'for-anthony' of git://repo.or.cz/qemu/kevin: Add qcow2 documentation hw/xen_disk: aio_inflight not released in handling ioreq when nr_segments==0 Improve error handling in do_snapshot_blkdev() Fix ATA SMART and CHECK POWER MODE Don't allow multiwrites against a block device without underlying medium tools: Use real async.c instead of stubs Add error message for loading snapshot without VM state block/qcow: Don't ignore immediate read/write and other failures block/vdi: Don't ignore immediate read/write failures
2011-03-21hw/arm_sysctl.c: Add the Versatile Express system registersPeter Maydell1-1/+63
Add support for the Versatile Express SYS_CFG registers, which provide a generic means of reading or writing configuration information from various parts of the board. We only implement shutdown and reset. Also make the RESETCTL register RAZ/WI on Versatile Express rather than reset the board. Other system registers are generally the same as Versatile and Realview. This includes a VMState version number bump for arm_sysctl, since we have new register state to preserve. It also adds sys_mci to the VMState while we're bumping the version number (an accidental omission from commit b50ff6f5). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-20 10:38:58 +0000