aboutsummaryrefslogtreecommitdiffstats
path: root/hw/usb-wacom.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-15Merge remote-tracking branch 'kraxel/usb.38' into stagingAnthony Liguori1-2/+1
* kraxel/usb.38: (28 commits) xhci: handle USB_RET_NAK xhci: remote wakeup support xhci: kill port arg from xhci_setup_packet xhci: stop on errors xhci: add trb type name lookup support. xhci: signal low- and fullspeed support usb: add USBBusOps->wakeup_endpoint usb: pass USBEndpoint to usb_wakeup usb: maintain async packet list per endpoint usb: Set USBEndpoint in usb_packet_setup(). usb: add USBEndpoint->{nr,pid} usb: USBPacket: add status, rename owner -> ep usb: fold usb_generic_handle_packet into usb_handle_packet usb: kill handle_packet callback usb-xhci: switch to usb_find_device() usb-musb: switch to usb_find_device() usb-ohci: switch to usb_find_device() usb-ehci: switch to usb_find_device() usb-uhci: switch to usb_find_device() usb: handle dev == NULL in usb_handle_packet() ...
2012-02-15qom: Unify type registrationAndreas Färber1-2/+3
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-10usb: Set USBEndpoint in usb_packet_setup().Gerd Hoffmann1-1/+1
With the separation of the device lookup (via usb_find_device) and packet processing we can lookup device and endpoint before setting up the usb packet. So we can initialize USBPacket->ep early and keep it valid for the whole lifecycle of the USBPacket. Also the devaddr and devep fields are not needed any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-10usb: kill handle_packet callbackGerd Hoffmann1-1/+0
All drivers except usb-hub use usb_generic_handle_packet. The only reason the usb hub has its own function is that it used to be called with packets which are intended for downstream devices. With the new, separate device lookup step this doesn't happen any more, so the need for a different handle_packet callback is gone. So we can kill the handle_packet callback and just call usb_generic_handle_packet directly. The special hub handling in usb_handle_packet() can go away for the same reason. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-9/+11
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03usb: separate out legacy usb registration from type registrationAnthony Liguori1-1/+2
Type registeration is going to get turned into a QOM call so decouple the legacy support. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27usb: convert to QEMU Object ModelAnthony Liguori1-15/+21
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13usb: track altsetting in USBDeviceGerd Hoffmann1-7/+0
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04usb: use iovecs in USBPacketGerd Hoffmann1-2/+4
Zap data pointer from USBPacket, add a QEMUIOVector instead. Add a bunch of helper functions to manage USBPacket data. Switch over users to the new interface. Note that USBPacket->len was used for two purposes: First to pass in the buffer size and second to return the number of transfered bytes or the status code on async transfers. There is a new result variable for the latter. A new status code was added to catch uninitialized result. Nobody creates iovecs with more than one element (yet). Some users are (temporarely) limited to iovecs with a single element to keep the patch size as small as possible. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20usb-wacom doesn't support migrationGerd Hoffmann1-0/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26usb: Pass the packet to the device's handle_control callbackHans de Goede1-3/+3
This allows using the generic usb_generic_handle_packet function from device code which does ASYNC control requests (such as the linux host pass through code). Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2011-05-26usb: update config descriptors to identify number of interfacesBrad Hards1-0/+1
Previously we relied on the .bNumInterfaces, but that won't always be accurate after the introduction of grouped interfaces. Signed-off-by: Brad Hards <bradh@frogmouth.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move remote wakeup handling to common codeGerd Hoffmann1-23/+0
This patch moves setting and clearing the remote_wakeup feature bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also USB_REQ_GET_STATUS handling is moved to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_{GET,SET}_CONFIGURATION handling to common codeGerd Hoffmann1-8/+1
This patch adds fields to the USBDevice struct for the current speed (hard-wired to full speed for now) and current device configuration. Also a init function is added which inializes these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION handling to be moved to common code. For most drivers the conversion is trivial ad they support a single configuration only anyway. One exception is bluetooth where some device-specific setup code runs after get/set configuration. The other is usb-net which actually has two configurations so the the code to check for the active configuration has been adapted. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_SET_ADDRESS handling to common codeGerd Hoffmann1-4/+0
USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices. Move it to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb wacom: use new descriptor infrastructure.Gerd Hoffmann1-105/+73
Switch the usb wavom driver over to the new descriptor infrastructure. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-10-20wacom tablet: activate event handlers.Gerd Hoffmann1-3/+10
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so it actually receives events. Also make sure we only remove the handler if we registered it before. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster1-2/+2
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster1-0/+1
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb-hid: use qdev for -usbdeviceGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12Fixed wacom emulationFrançois Revol1-14/+24
- for absolute mode, scale coordinates to the real device maximum values, since some drivers (on Haiku and Linux at least) need them as such, and the HID descriptor is boggus on some models anyway, - keep the coordinates even when no button is pressed, on real tablet the pen is sensed on the surface even without direct contact, and drivers expect this, - map left button to pressure according to what the Haiku driver wants, - map the right button to the pen button, - map the middle button to the eraser, - use asynchronous reporting as the hid code does, stops the Haiku driver (and probably others) from spending 50% cpu polling for changes. Signed-off-by: François Revol <revol@free.fr> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann1-1/+0
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add some convinience aliases.Gerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: make qemu aware of usb busses.Gerd Hoffmann1-5/+0
Move usb code from vl.c to usb-bus.c and make it use the new data structures added by qdev conversion. qemu usb core should be able to handle multiple USB busses just fine now (untested though). Kill some usb_*_init() legacy functions, use usb_create_simple() instead. Kill some FIXMEs added by the first qdev/usb patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann1-12/+22
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-2/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-3/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-10Wacom PenPartner tablet (virtual USB device).balrog1-0/+412
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2977 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 03:00:24 +0000