aboutsummaryrefslogtreecommitdiffstats
path: root/hw/qxl.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-24optimize screendump for the common non-switch caseGerd Hoffmann1-2/+2
switch console only if needed, also pass down whenever the console was switched or not because a displaysurface redraw is only needed in case the console was switched. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-21qxl: add user-friendly bar size propertiesGerd Hoffmann1-0/+8
Add two properties to specify bar sizes in megabytes instead of bytes, which is alot more user-friendly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-21qxl: move ram size init to new functionGerd Hoffmann1-19/+22
Factor memory bar sizing bits out to a separate function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-21qxl: drop vram bar minimum sizeGerd Hoffmann1-2/+2
There is no reason to require a minimum size of 16 MB for the vram. Lower the limit to 4096 (one page). Make it disapper completely would break guests.
2012-02-21qxl: make sure primary surface is saved on migration also in compat modeYonit Halperin1-1/+1
RHBZ #790083 Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-21qxl: set only off-screen surfaces dirty instead of the whole vramYonit Halperin1-9/+44
We used to assure the guest surfaces were saved before migration by setting the whole vram dirty. This patch sets dirty only the areas that are actually used in the vram. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-21qxl: fix warnings on 32bitGerd Hoffmann1-3/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-18/+22
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27pci: convert to QEMU Object ModelAnthony Liguori1-24/+38
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: prepare source tree for code conversionAnthony Liguori1-4/+4
These are various small stylistic changes which help make things more consistent such that the automated conversion script can be simpler. It's not necessary to agree or disagree with these style changes because all of this code is going to be rewritten by the patch monkey script anyway. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-25memory: change dirty setting APIs to take a sizeBlue Swirl1-4/+1
Instead of each target knowing or guessing the guest page size, just pass the desired size of dirtied memory area. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-17qxl: Slot sanity check in qxl_phys2virt() is off by one, fixMarkus Armbruster1-1/+1
Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-04vmstate, memory: decouple vmstate from memory APIAvi Kivity1-6/+6
Currently creating a memory region automatically registers it for live migration. This differs from other state (which is enumerated in a VMStateDescription structure) and ties the live migration code into the memory core. Decouple the two by introducing a separate API, vmstate_register_ram(), for registering a RAM block for migration. Currently the same implementation is reused, but later it can be moved into a separate list, and registrations can be moved to VMStateDescription blocks. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-07qxl: fix vga port initialization.Gerd Hoffmann1-5/+17
Commit 0a039dc70096b768d3810afa50ba1d214768aaf4 broke vga modes for qxl-vga by loosing vga_ioport_read windup. qxl needs to hook into vga port writes only and used to realize that by letting vga_init() do the work for both reads and writes, then overwrite the write function. That little detail was missed while doing the conversion ... This patch fixes it. It also switch qxl vga ioport registration to portio lists while being at it. Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01qxl: create slots on post_load in vga stateAlon Levy1-7/+19
RHBZ 740547 If we migrate when the device is in vga state the guest still believes the slots are created, and will cause operations that reference the slots, causing a "panic: virtual address out of range" on the first of them. Easy to see by migrating in vga mode with a driver loaded, for instance windows cmd window in full screen mode, and then exiting vga mode back to native mode will cause said panic. Fixed by doing the slot recreation in post_load for vga mode as well. Note that compat does not require any changes because it creates it's only slot by a side effect of QXL_IO_SET_MODE. Signed-off-by: Alon Levy <alevy@redhat.com>
2011-10-25qxl: reset update_surfaceAlon Levy1-0/+1
update init_qxl_ram to reset update_surface to 0. This fixes one case of breakage when installing an old driver in a vm that had a new driver installed. The newer driver would know about surface creation and would change update_surface to !=0, then a reset would happen, all surfaces are destroyed, then the old driver is initialized and issues an UPDATE_AREA, and spice server aborts on invalid surface. RHBZ: 690427 Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25qxl: fix guest cursor trackingYonit Halperin1-4/+12
(1) If the guest cursor command is empty, don't reload it after migration. (2) Cleaning the guest cursor when it is released by the spice server. In addition, explicitly reset the cursor in spice upon destroying the primary surface (was done by spice-server implicitly). This will prevent access to pci memory that was released. RHBZ: 744518 Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25qxl: factor out propertiesGerd Hoffmann1-24/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25qxl: Drop phread_yield on OOMJan Kiszka1-6/+0
This was only a best-effort attempt, by far not guaranteed to have an effect. Drop it so that also no direct pthread usage remain in the device model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25qxl: Convert to QEMU thread APIJan Kiszka1-2/+2
Use QEMU thread API instead of pthread directly. We still need to get rid of pthread_yield, though, to drop pthread.h inclusion. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-11vga: Convert to isa_register_portio_listRichard Henderson1-1/+1
[jan: fix cut'n'paste errors] [avi: adjust pci variants not to use isa functions] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino1-2/+3
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-07qxl: s/qxl_set_irq/qxl_update_irq/Yonit Halperin1-6/+6
Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07qxl: send interrupt after migration in case ram->int_pending != 0, RHBZ #732949Yonit Halperin1-2/+8
if qxl_send_events was called from spice server context, and then migration had completed before a call to pipe_read, the target guest qxl driver didn't get the interrupt. In addition, qxl_send_events ignored further interrupts of the same kind, since ram->int_pending was set. As a result, the guest driver was stacked or very slow (when the waiting for the interrupt was with timeout). Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07hw/qxl: Fix format string errorsPeter Maydell1-4/+4
Fix format string errors causing compile failure on 32 bit hosts when spice is enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-02main: force enabling of I/O threadAnthony Liguori1-4/+0
Enabling the I/O thread by default seems like an important part of declaring 1.0. Besides allowing true SMP support with KVM, the I/O thread means that the TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which currently requires a (racey) signal based alarm system. I know there have been concerns about performance. I think so far the ones that have come up (virtio-net) are most likely due to secondary reasons like decreased batching. I think we ought to force enabling I/O thread early in 1.0 development and commit to resolving any lingering issues. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22vga: drop get_system_memory() from vga devices and derivativesAvi Kivity1-1/+1
Instead, use the bus accessors, or get the address space directly from the board constructor. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-2/+2
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-10qxl: unbreak after memory API conversionAlon Levy1-2/+3
Break is only noticable with newer spice-server library (0.8.2 release or 0.9.0 and newer on master branch). ioport_write's val was changed from uint32_t to uint64_t, this broke two printfs. Use PRId64 instead of %d. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-10qxl: allowing the command rings to be not empty when spice worker is stopped ↵Yonit Halperin1-5/+3
RHBZ #728984 same as 8927cfbba232e28304734f7afd463c1b84134031, but for qxl_check_state, that was triggered by qxl_pre_load (which calls qxl_hard_reset, which calls qxl_soft_reset), and caused the migration target to crash. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity1-8/+8
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08vga: convert vga and its derivatives to the memory APIAvi Kivity1-86/+49
Convert all vga memory to the memory API. Note we need to fall back to get_system_memory(), since the various buses don't pass the vga window as a memory region. We no longer need to sync the dirty bitmap of the cirrus mapped memory banks, since the memory API takes care of that for us. [jan: fix vga-pci logging] Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-03qxl: bump pci revGerd Hoffmann1-7/+18
Inform guest drivers about the new features I/O commands we have now (async commands, S3 support) if building with newer spice, i.e. if SPICE_INTERFACE_QXL_MINOR >= 1. sneaked in some 81+ column line spliting. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alon Levy <alevy@redhat.com>
2011-08-03qxl: add QXL_IO_FLUSH_{SURFACES,RELEASE} for guest S3&S4 supportAlon Levy1-0/+30
Add two new IOs. QXL_IO_FLUSH_SURFACES - equivalent to update area for all surfaces, used to reduce vmexits from NumSurfaces to 1 on guest S3, S4 and resolution change (windows driver implementation is such that this is done on each of those occasions). QXL_IO_FLUSH_RELEASE - used to ensure anything on last_release is put on the release ring for the client to free. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-03qxl: async io support using new spice apiAlon Levy1-37/+203
Some of the QXL port i/o commands are waiting for the spice server to complete certain actions. Add async versions for these commands, so we don't block the vcpu while the spice server processses the command. Instead the qxl device will raise an IRQ when done. The async command processing relies on an added QXLInterface::async_complete and added QXLWorker::*_async additions, in spice server qxl >= 3.1 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alon Levy <alevy@redhat.com>
2011-08-01qxl: only disallow specific io's in vga modeAlon Levy1-1/+2
Since the driver is still in operation even after moving to UNDEFINED, i.e. by destroying primary in any way. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01qxl: make qxl_guest_bug take variable argumentsAlon Levy1-2/+7
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01qxl: error handling fixes and cleanups.Gerd Hoffmann1-4/+30
Add qxl_guest_bug() function which is supposed to be called in case sanity checks of guest requests fail. It raises an error IRQ and logs a message in case guest debugging is enabled. Make PANIC_ON() abort instead of exit. That macro should be used for qemu bugs only, any guest-triggerable stuff should use the new qxl_guest_bug() function instead. Convert a few easy cases from PANIC_ON() to qxl_guest_bug() to show intended usage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01qxl: add io_port_to_stringAlon Levy1-1/+39
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01qxl: fix surface tracking & lockingGerd Hoffmann1-1/+12
Surface tracking needs proper locking since it is used from vcpu and spice worker threads, add it. Also reset the surface counter when zapping all surfaces. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01spice/qxl: move worker wrappersGerd Hoffmann1-10/+57
Move the wrapper functions which are used by qxl only to qxl.c. Rename them from qemu_spice_* to qxl_spice_*. Also pass in a qxl state pointer instead of a SimpleSpiceDisplay pointer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01spice: add qemu_spice_display_init_commonGerd Hoffmann1-6/+1
Factor out SimpleSpiceDisplay initialization into qemu_spice_display_init_common() and call it from both qxl.c (for vga mode) and spice-display.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01spice: add worker wrapper functions.Gerd Hoffmann1-16/+16
Add wrapper functions for all spice worker calls. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20qxl: upon reset, if spice worker is stopped, the command rings can be not emptyYonit Halperin1-2/+2
Spice worker does no longer process commands when it is stopped. Otherwise, it might crash during migration when attempting to process commands while the guest is not completely loaded. Cc: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04qxl: allow QXL_IO_LOG also in vgaAlon Levy1-0/+1
The driver may change us to vga mode and still issue a QXL_IO_LOG, which we can easily support. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04qxl: put QXL_IO_UPDATE_IRQ into vgamode whitelistGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04qxl: make sure primary surface is saved on migrationYonit Halperin1-3/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04qxl: add dev id to guest printsAlon Levy1-1/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04qxl: interface_get_command: fix reported modeAlon Levy1-4/+21
report correct mode when in undefined mode. introduces qxl_mode_to_string(), and uses it in other places too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 00:45:04 +0000