aboutsummaryrefslogtreecommitdiffstats
path: root/hw/ppc440_bamboo.c
AgeCommit message (Collapse)AuthorFilesLines
2009-09-20Compile loader only onceBlue Swirl1-3/+5
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev-ify virtio-blk.Gerd Hoffmann1-11/+0
First user of the new drive property. With this patch applied host and guest config can be specified separately, like this: -drive if=none,id=disk1,file=/path/to/disk.img -device virtio-blk-pci,drive=disk1 You can set any property for virtio-blk-pci now. You can set the pci address via addr=. You can switch the device into 0.10 compat mode using class=0x0180. As this is per device you can have one 0.10 and one 0.11 virtio block device in a single virtual machine. Old syntax continues to work. Internally it does the same as the two lines above though. One side effect this has is a different initialization order, which might result in a different pci address being assigned by default. Long term plan here is to have this working for all block devices, i.e. once all scsi is properly qdev-ified you will be able to do something like this: -drive if=none,id=sda,file=/path/to/disk.img -device lsi,id=lsi,addr=<pciaddr> -device scsi-disk,drive=sda,bus=lsi.0,lun=<n> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-27Rename HAVE_FDT to CONFIG_FDT and define it also in MakefileJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27kill drives_tableGerd Hoffmann1-2/+3
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -drive if=virtioMarkus Armbruster1-1/+3
Make drive_init() accept addr=, put the value into struct DriveInfo. Use it in all the places that create virtio-blk-pci devices: pc_init1(), bamboo_init(), mpc8544ds_init(). Don't support addr= in third argument of monitor command pci_add and second argument of drive_add, because that clashes with their first arguments. Admittedly unelegant. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster1-1/+1
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-17Allow user to specify CPU modelBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-30Use relative path for biosPaul Brook1-10/+9
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori1-1/+8
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-18Separate virtio PCI codePaul Brook1-2/+2
Split the PCI host bindings from the VRing transport implementation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14Virtio-console conversionPaul Brook1-3/+3
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14Virtio-blk qdev conversionPaul Brook1-2/+1
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Remove vga_ram_sizePaul Brook1-1/+1
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook1-1/+0
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Wean device tree code off phys_ram_base.pbrook1-3/+6
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7068 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Use load_image_targphys and avoid phys_ram_base.pbrook1-1/+2
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-2/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16Fix warningsblueswir11-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6346 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15add virtio-console initializer for powerpc (Christian Ehrhardt)aliguori1-0/+7
This adds an intialization of virtio console for powerpc. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6319 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)aliguori1-8/+3
Add a table of PCI NIC models to pass to qemu_setup_nic_model(). While we're at it, also add a corresponding table of NIC init functions. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-16target-ppc: IBM PowerPC 440EP Bamboo reference board emulationaurel321-0/+190
Since most IO devices are integrated into the 440EP chip, "Bamboo support" mostly entails implementing the -kernel, -initrd, and -append options. These options are implemented by loading the guest as if u-boot had done it, i.e. loading a flat device tree, updating it to hold initrd addresses, ram size, and command line, and passing the FDT address in r3. Since we use it with KVM, we enable the virtio block driver and include hooks necessary for KVM support. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6067 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-15 02:44:09 +0000