aboutsummaryrefslogtreecommitdiffstats
path: root/hw/pci-hotplug.c
AgeCommit message (Collapse)AuthorFilesLines
2011-02-07blockdev: add refcount to DriveInfoMarcelo Tosatti1-1/+1
The host part of a block device can be deleted with in progress block migration. To fix this, add a reference count to DriveInfo, freeing resources on last reference. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31scsi hotplug: Set DriveInfo member bus correctlyMarkus Armbruster1-0/+1
drive_init() picks the first free bus and unit number, unless the user specifies them. This isn't a good fit for the drive_add monitor command, because there we specify the controller by PCI address instead of using bus number set by drive_init(). scsi_hot_add() takes care to replace the unit number set by drive_init() by the real one, but it neglects to replace the bus number. Thus, bus/unit in DriveInfo may be bogus. Affects drive_get() and drive_get_max_bus(). I'm not aware of anything bad happening because of that; looks like by the time we're hot-plugging, the two functions aren't used anymore. Fix it anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi: Allow scsi_bus_legacy_add_drive() to set removable bitStefan Hajnoczi1-1/+1
scsi-disk devices may wish to override the removable bit. Add support for a qdev property on SCSI devices. This is will be used by usb-msd. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-24Rearrange block headersBlue Swirl1-0/+1
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann1-1/+1
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-11pci hotplug: make pci_device_hot_remove() staticIsaku Yamahata1-1/+1
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-02block: Catch attempt to attach multiple devices to a blockdevMarkus Armbruster1-1/+5
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo happily creates two SCSI disks connected to the same block device. It's all downhill from there. Device usb-storage deliberately attaches twice to the same blockdev, which fails with the fix in place. Detach before the second attach there. Also catch attempt to delete while a guest device model is attached. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-2/+2
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callersMarkus Armbruster1-0/+3
None of its callers checks for failure. scsi_hot_add() can crash because of that: (qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1 scsi-generic: scsi generic interface too old Segmentation fault (core dumped) Fix all callers, not just scsi_hot_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-2/+0
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-31pci-hotplug: make them aware of pci domain.Isaku Yamahata1-3/+4
add helper function which converts root bus to pci domain. make them aware of pci domain. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-19Revert "monitor: Convert do_pci_device_hot_remove() to QObject"Markus Armbruster1-3/+2
We don't want pci_del in QMP. Use device_del instead. This reverts commit 6848d827162fea039f2658414a4adb6164a4f9b0. Conflicts: hw/pci-hotplug.c sysemu.h Signed-off-by: Markus Armbruster <armbru@redhat.com>
2010-05-19Revert "PCI: Convert pci_device_hot_add() to QObject"Markus Armbruster1-41/+5
Short story: We don't want pci_add in QMP. Long story follows. pci_add can do two things: * Hot plug a PCI NIC. device_add is more general. * Hot plug a PCI disk controller, and a drive connected to it. The controller is either virtio-blk-pci (if=virtio) or lsi53c895a (if=scsi). With the latter, the drive is optional. Use drive_add to hotplug additional SCSI drives. Except drive_add is not available in QMP. device_add is more general for controllers and the guest part of drives. I'm working on a more general alternative for the host part of drives. Why am I proposing to remove pci_add from QMP before its replacement is ready? I want it out sooner rather than later, because it isn't fully functional (errors and drive_add are missing), and we do not plan to complete the job. In other words, it's not really usable over QMP now, and it's not what we want for QMP anyway. Since we don't want it to be used over QMP, we should take it out, not leave it around as a trap for the uninitiated. Dan Berrange confirmed that libvirt has no need for pci_add & friends over QMP. This reverts commit 7a344f7ac7bb651d0556a933ed8060d3a9e5d949. Conflicts: hw/pci-hotplug.c sysemu.h Signed-off-by: Markus Armbruster <armbru@redhat.com>
2010-04-25x86: remove dead assignments, spotted by clang analyzerBlue Swirl1-2/+1
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()Markus Armbruster1-2/+0
Both functions report errors nicely enough now, no need for additional messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-03-16qemu-option: Move the implied first name into QemuOptsListMarkus Armbruster1-1/+1
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-1/+1
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16error: Don't abuse qemu_error() for non-error in scsi_hot_add()Markus Armbruster1-4/+6
Commit 30d335d6 converted an informational message from monitor_printf() to qemu_error(), probably because the latter doesn't need a mon argument. A later commit will make qemu_error() print additional stuff that is only appropriate for proper errors, and then this will break. Clean it up.
2010-02-19Monitor: Convert pci_device_hot_remove() to cmd_new_ret()Luiz Capitulino1-7/+7
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert pci_device_hot_add() to cmd_new_ret()Luiz Capitulino1-5/+11
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Monitor: remove unneeded checksLuiz Capitulino1-1/+0
It's not needed to check the return of qobject_from_jsonf() anymore, as an assert() has been added there. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Fix backcompat for hotplug of SCSI controllersDaniel P. Berrange1-5/+1
SCSI controllers have no trouble existing without any attached disks. This could be achieved with the (legacy) monitor syntax pci_add pci_addr=auto storage if=scsi This is now denied with scsi requires a backing file/device. failed to add if=scsi There is no need for this denial and it breaks compatability with existing QEMU usage, so remove the check for presence of a drive. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12PCI: Convert pci_device_hot_add() to QObjectLuiz Capitulino1-4/+36
Return a QDict with information about the just added device. This commit should not change user output. Please, note that this patch does not do error handling conversion. In error conditions the handler still calls monitor_printf(). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12scsi: fix drive hotplug.Gerd Hoffmann1-0/+1
This patch fills the DriveInfo->unit after hotplugging a scsi disk. It makes a difference when auto-assigning a scsi id, where unit was left filled with '-1' instead of the actual scsi id. With this patch applied the the drive naming logic in drive_init() works as good as it did in previous releases. Which means it works fine with a single scsi bus. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12pci: don't abort() when trying to hotplug with acpi off.Gerd Hoffmann1-1/+16
The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI also disables hotplug for the PCI bus. This patch makes qemu check whenever the PCI bus in question can handle hotplug before trying to add devices. This is needed because qdev will abort() on any attempt to hotplug devices into a non-hotpluggable bus. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01pci: s/pci_find_host_bus/pci_find_root_bus/gIsaku Yamahata1-2/+2
This patch renames pci_find_host_bus() to pci_find_root_bus() as suggested by "Michael S. Tsirkin" <mst@redhat.com>. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-09pci: make pci configuration transaction more accurate.Isaku Yamahata1-2/+2
This patch sorts out/enhances pci code to track pci bus topology more accurately. - Track host bus bridge with pci domain number. Although the current qemu implementation supports only pci domian 0 yet. - Track pci bridge parent-child relationship. When looking down from pci host bus for pci sub bus, be aware of secondary bus/subordinate bus. Thus pci configuration transaction is more accurately emulated. This patch adds new member to PCIBus to track pci bus topology. Since qdev already tracks down bus relationship, those new member wouldn't be necessary. However it would be addressed later because not all the pci device isn't converted to qdev yet. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09scsi: move scsi-disk.h -> scsi.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27monitor: Convert do_pci_device_hot_remove() to QObjectLuiz Capitulino1-1/+2
Errors are still directly printed, as we are only converting regular output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27hotplug: more fixes for scsi disk hotplug.Gerd Hoffmann1-10/+34
Changes: - create common scsi_hot_add function for adding a scsi disk to a adapter. - Add sanity checks. You can't drive_add disks to the VGA any more. - Ignore the unit value calculated by drive_init, add a comment explaining why. Review the patch to find the details ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27hotplug: fix "pci_add storage if=scsi"Gerd Hoffmann1-2/+13
Explicitly add the drive to the bus of the newly created scsi adapter instead of hoping that scsi_bus_legacy_handle_cmdline() picks it up correctly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27kill dead nic unplug code.Gerd Hoffmann1-25/+0
Cleanup on unplug happens via qdev->exit() callback now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15net: handle -netdevice optionsMark McLoughlin1-1/+1
Same as for -net except for: - only tap, user, vde and socket types are supported - the vlan parameter is not allowed - the name parameter is not allowed but the id parameter is required Patchworks-ID: 35517 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12TARGET_I386 is always defined if TARGET_X86_64 is definedJuan Quintela1-1/+1
Patchworks-ID: 35378 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Check return value of qdev_init()Markus Armbruster1-2/+2
But do so only where it may actually fail. Leave the rest for the next commit. Patchworks-ID: 35167 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Final net cleanup after conversion to QemuOptsMark McLoughlin1-1/+1
Now that net_client_init() has no users, kill it off and rename net_client_init_from_opts(). There is no further need for the old code in net_client_parse() either. We use qemu_opts_parse() 'firstname' facitity for that. Instead, move the special handling of the 'vmchannel' type there. Simplify the vl.c code into merely call net_client_parse() for each -net command line option and then calling net_init_clients() later to iterate over the options and create the clients. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port PCI NIC hotplug to QemuOptsMark McLoughlin1-2/+14
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Revert "Fix exit on 'pci_add' Monitor command"Anthony Liguori1-4/+0
This reverts commit 0148fde54c2478ea8a47c8dbfe4c0fb8bda4d996. As requested by Luiz. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Rename pci_create_noinit() to pci_create()Markus Armbruster1-2/+2
It's qdev_create() specialized for PCI, so name it accordingly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix pci_add storage not to exit on bad first argumentMarkus Armbruster1-2/+10
Monitor command "pci_add ADDR storage ..." does its work in qemu_pci_hot_add_nic(). It called pci_create(..., ADDR) to create the device. That's wrong, because pci_create() terminates the program when ADDR is invalid. Use pci_get_bus_devfn() and pci_create_noinit() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05allow if=none for drive_addGerd Hoffmann1-0/+3
Allow adding unconnected host drives by specifying if=none like it is possible with -drive. They can be put in use with drive attributes, like this: drive_add dummy if=none,id=mydisk,file=/some/disk.img device_add virtio-blk-pci,drive=mydisk which is the monitor aequivalent to these command line switches: -drive if=none,id=mydisk,file=/some/disk.img -device virtio-blk-pci,drive=mydisk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05refactor drive_hot_addGerd Hoffmann1-19/+19
move pci device lookup into the "case IF_SCSI" section, so we can do something else for other interface types. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann1-3/+0
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: windup acpi-based hotplugGerd Hoffmann1-13/+2
Switch over acpi-based PCI hotplug for pc over to the new qdev-based pci hotplugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: use qdev for device destruction.Gerd Hoffmann1-1/+1
pci_unregister_device is static now and hooked into Devicestate->exit. qdev_free(pci_device) works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix exit on 'pci_add' Monitor commandLuiz Capitulino1-0/+4
If the user issues one of the following commands to the Monitor: pci_add pci_addr=auto nic model=None pci_add pci_addr=auto nic model=? QEMU will exit, because the function used to perform sanity checks (qemu_check_nic_model_list()) exits on error. This function is used by the startup code, where it makes sense to exit on error, but in the Monitor it doesn't. Changing qemu_check_nic_model_list() to not exit on error is not possible though, as it's used by the board init code (the PC one), where all board specific code must have void return. The way I've chosen to fix this was to introduce a new function called pci_nic_supported(), which checks if the NIC is supported and returns true or false accordingly. The new function is used only by the Monitor, it performs the necessary check and returns an error in case the NIC is not supported, thus qemu_check_nic_model_list()'s exit is never trigged. The following should be observed: 1. Only the specified NIC is checked, the default one is assumed to be supported 2. The NIC query command (model=?) won't work with pci_add, the right way to do this with the Monitor is to add a new command Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl1-1/+1
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann1-2/+5
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_3 to use QDictLuiz Capitulino1-2/+4
This commit ports command handlers that receive three arguments to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_2 to use QDictLuiz Capitulino1-1/+3
This commit ports command handlers that receive two arguments to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 21:50:58 +0000