aboutsummaryrefslogtreecommitdiffstats
path: root/hw/etraxfs_pic.c
AgeCommit message (Collapse)AuthorFilesLines
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann1-1/+2
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev/prop: convert etraxfs_pic.c to helper macros.Gerd Hoffmann1-8/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-16qdev: rework device properties.Gerd Hoffmann1-3/+15
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity1-1/+1
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-26Remove qdev irq sink handlingPaul Brook1-1/+1
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-19Hardware convenience libraryPaul Brook1-2/+2
The only target dependency for most hardware is sizeof(target_phys_addr_t). Build these files into a convenience library, and use that instead of building for every target. Remove and poison various target specific macros to avoid bogus target dependencies creeping back in. Big/Little endian is not handled because devices should not know or care about this to start with. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-18cris: First shot at qdev for CRIS interrupts.Edgar E. Iglesias1-40/+33
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-16ETRAX-PIC: Untabify.Edgar E. Iglesias1-88/+88
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-16ETRAX: Simplify PIC interface.Edgar E. Iglesias1-22/+15
Instead of exporting a custom structure to represent different interrupt types, just export the irq array and have the top elements point to the NMI lines. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook1-2/+1
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-05ETRAX: Drop the _t for the internal PIC type.Edgar E. Iglesias1-8/+8
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-05ETRAX: Simplify the interrupt controller model.Edgar E. Iglesias1-57/+24
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-03-05monitor: Rework API (Jan Kiszka)aliguori1-2/+3
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-6/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07ETRAX: Correctly update the interrupt vector when interrupts get masked.edgar_igl1-64/+38
Cannot believe this bug has been around for so long. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6207 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook1-6/+0
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-09ETRAX: Add NMI support to the watchdog and the interrupt controller.edgar_igl1-9/+44
* Add NMI and GURU exceptions to teh interrupt controller. * Teach the watchdog timer to signal an NMI before reseting the chip. * Add etraxfs.h to hold api for etrax device models. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4720 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-11Update the etrax machine.edgar_igl1-0/+1
* Use CFI-0002 flashes. * Connect one of the ethernet blocks. * Simplified irq numbering. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4430 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-14Made the etrax timers and serial-ports base address relocatable. Use ↵edgar_igl1-2/+2
target_phys_addr_t instead of target_ulong. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4058 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-14* Add a model of the ETRAX interrupt controller.edgar_igl1-0/+207
* Clean up the interrupt handling a bit. * Connect some NOR flash to the test board. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4055 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-22 17:21:03 +0000