aboutsummaryrefslogtreecommitdiffstats
path: root/hw/e1000.c
AgeCommit message (Collapse)AuthorFilesLines
2009-08-27e1000 cleanupJuan Quintela1-5/+5
Remove un needed casts from void *. Use DO_UPCAST() instead of blind casts Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann1-1/+2
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-30e1000.c doesn't properly emulate EERD and ICS registersBill Paul1-4/+9
Once again, the emulation of the EERD and ICS registers in e1000.c is incorrect. Nobody has noticed this before because none of the Intel-written e1000 drivers use these registers, and all of the independently written open source drivers copy Intel's example, so they don't use them either. Regardless, these registers are documented in the programmer's manuals, and their emulated behavior doesn't match the verified behavior of real hardware, so any software that does use them doesn't function correctly. -Bill Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16fix for bad macaddr of e1000 in Windows 2003 server with original MS driverNaphtali Sprei1-0/+5
The sequence of reading from eeprom is "offset by one" moved because of a false detection of a clock cycle after an eeprom reset. Keeping the last clock value after a reset keeps it in sync. Signed-off-by: Naphtali Sprei <nsprei@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl1-2/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-09qdev: update pci device registration.Gerd Hoffmann1-1/+7
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch of parameters. Also adds config_read and config_write callbacks to PCIDeviceInfo, so drivers needing these can be converted to the qdev device API too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka1-1/+1
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-17Revert "Update irqs on reset and device load"Blue Swirl1-9/+1
This reverts commit 3dcd219f09d6c1817bf9a132899e6b925f7a0914. It is incorrect to call qemu_irq functions (or any other functions that access other device state) during savevm/loadvm. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity1-2/+2
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity1-1/+1
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-10Merge branch 'net-queue'Anthony Liguori1-14/+16
* net-queue: (28 commits) virtio-net: Increase filter and control limits virtio-net: Add new RX filter controls virtio-net: MAC filter optimization virtio-net: Fix MAC filter overflow handling virtio-net: reorganize receive_filter() virtio-net: Use a byte to store RX mode flags virtio-net: Add version_id 7 placeholder for vnet header support virtio-net: implement rx packet queueing net: make use of async packet sending API in tap client net: add qemu_send_packet_async() net: split out packet queueing and flushing into separate functions net: return status from qemu_deliver_packet() net: add return value to packet receive handler net: pass VLANClientState* as first arg to receive handlers net: re-name vc->fd_read() to vc->receive() net: add fd_readv() handler to qemu_new_vlan_client() args net: only read from tapfd when we can send net: vlan clients with no fd_can_read() can always receive net: move the tap buffer into TAPState net: factor tap_read_packet() out of tap_send() ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09Update irqs on reset and device loadBlue Swirl1-1/+9
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09Register reset functions for e1000 and rtl8139Blue Swirl1-7/+14
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin1-6/+8
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin1-4/+4
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin1-3/+3
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin1-2/+2
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-27e1000: Ignore reset commandKevin Wolf1-2/+9
When a reset is requested, the current e1000 emulation never clears the reset bit which may cause a driver to hang. This patch masks the reset bit out when setting the control registert, so the reset is immediately completed. Signed-off-by: Kevin Wolf <mail@kevin-wolf.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14PCI network qdev conversionPaul Brook1-13/+13
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Replace gcc variadic macro extension with C99 version (missed one)Blue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-08e1000: Do not reinit pci config space to 0Amit Shah1-1/+0
pci_register_device already mallocs the pci config space buffer filled with zeroes. Doing this again breaks some default config space writes like setting the subsystem vendor id and subsystem device id. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01Pci nic: pci_register_device can failChris Wright1-0/+3
The pci_register_device() call in PCI nic initialization routines can fail. Handle this failure and propagate a meaningful error message to the user instead of generating a SEGV. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori1-1/+10
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Remove NICInfo from e1000 and mipsnet state (Mark McLoughlin)aliguori1-3/+1
NICInfo isn't used after initialization, so remove it from the driver state structures. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7147 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-20e1000: Fix RX descriptor low threshold interrupt logic (Alex Williamson)aliguori1-2/+2
The RXDMT0 interrupt is supposed to fire when the number of free RX descriptors drops to some fraction of the total descriptors. However in practice, it seems like we're adding this interrupt cause on every RX. Fix the logic to treat (tail - head) as the number of free entries rather than the number of used entries. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6864 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: LSI SCSI and e1000 unregister callbacks (Marcelo Tosatti)aliguori1-0/+11
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6605 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)aliguori1-1/+3
Change the PCI network drivers init functions to return the PCIDev, to inform which slot has been hot-plugged. Also record PCIDevice structure on NICInfo to locate for release on hot-removal. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01Add and use #defines for PCI device classesblueswir11-2/+1
This patch adds and uses #defines for PCI device classes and subclases, using a new pci_config_set_class() function, similar to the recently added pci_config_set_vendor_id() and pci_config_set_device_id(). Change since v1: fixed compilation of hw/sun4u.c Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26Define PCI vendor and device IDs in pci.h (Stuart Brady)aliguori1-2/+2
This patch defines PCI vendor and device IDs in pci.h (matching those from Linux's pci_ids.h), and uses those definitions where appropriate. Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id() accessors as suggested by Anthony Liguori. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Implement e1000 link status (Mark McLoughlin)aliguori1-0/+16
On link up or down we set the E1000_STATUS_LU ("link up") bit in the status register and set the E1000_ICR_LSC ("link status changed") bit in the interrupt cause register before interrupting the guest. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6249 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori1-1/+1
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori1-4/+1
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori1-2/+2
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel321-1/+1
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-22Use the ARRAY_SIZE() macro where appropriate.malc1-4/+4
Change from v1: Avoid changing the existing coding style in certain files. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-09KVM: Coalesced MMIO supportaliguori1-0/+12
MMIO exits are more expensive in KVM or Xen than in QEMU because they involve, at least, privilege transitions. However, MMIO write operations can be effectively batched if those writes do not have side effects. Good examples of this include VGA pixel operations when in a planar mode. As it turns out, we can get a nice boost in other areas too. Laurent mentioned a 9.7% performance boost in iperf with the coalesced MMIO changes for the e1000 when he originally posted this work for KVM. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook1-6/+4
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-21e1000 VLAN offload emulation (Alex Williamson)aliguori1-7/+73
We're currently ignoring the e1000 VLAN tagging, stripping and filtering features in the e1000 emulation. This patch adds backing for the relevant registers and provides a software implementation of the acceleration, such that a guest can make use of VLANs. This is mostly (only?) useful for a guest on a bridge (not user mode networking). The only caveat beyond that is that you need to make sure the host NIC isn't doing it's own tagging, stripping, or filtering. This generally means the host NIC on the bridge should not be part of a VLAN. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5766 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Resurrect the safe part of r5274blueswir11-7/+7
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5401 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Make some tables constblueswir11-6/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5395 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-30Add some missing static qualifiersblueswir11-2/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5363 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-25Revert r5274 which breaks savevm/loadvmblueswir11-7/+7
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5321 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-20Add signed versions of save/load functionsblueswir11-7/+7
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5274 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-14Fix warnings that would be caused by gcc flag -Wwrite-stringsblueswir11-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-06only check RCTL_EN in e1000_can_receive()aliguori1-2/+1
e1000_receive() has code to raise a receive overflow interrupt when the receive buffer head and tail match. However, with the present implementation of e1000_can_receive(), this code is unreachable -- and etherboot breaks as a result. Signed-off-by: Charles Duffy <charles_duffy@messageone.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4987 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-29e1000: use common checksumming codealiguori1-14/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4972 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-18Various NICs: Fix suspend/resume of multiple instances, by Jan Kiszka.ths1-7/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4892 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-16e1000: only use TSE if enabled for current packet (Anthony Xu). balrog1-19/+32
Previously, all data descriptors used TSE context descriptor by default, It's not correct, per spec, data descriptor uses TSE bit to indicate whether use TSE, Legacy data descripter never use TSE. This patch fixed this bug. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4878 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-13Fix compiler warning.ths1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4451 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-20 07:38:26 +0000