aboutsummaryrefslogtreecommitdiffstats
path: root/hw
diff options
context:
space:
mode:
Diffstat (limited to 'hw')
-rw-r--r--hw/exynos4210.c29
-rw-r--r--hw/exynos4210.h9
-rw-r--r--hw/exynos4210_uart.c676
3 files changed, 714 insertions, 0 deletions
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index 5b1e24c6c..555adc0dd 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -29,6 +29,18 @@
#define EXYNOS4210_CHIPID_ADDR 0x10000000
+/* UART's definitions */
+#define EXYNOS4210_UART0_BASE_ADDR 0x13800000
+#define EXYNOS4210_UART1_BASE_ADDR 0x13810000
+#define EXYNOS4210_UART2_BASE_ADDR 0x13820000
+#define EXYNOS4210_UART3_BASE_ADDR 0x13830000
+#define EXYNOS4210_UART0_FIFO_SIZE 256
+#define EXYNOS4210_UART1_FIFO_SIZE 64
+#define EXYNOS4210_UART2_FIFO_SIZE 16
+#define EXYNOS4210_UART3_FIFO_SIZE 16
+/* Interrupt Group of External Interrupt Combiner for UART */
+#define EXYNOS4210_UART_INT_GRP 26
+
/* External GIC */
#define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000
#define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000
@@ -187,5 +199,22 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
+ /*** UARTs ***/
+ exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
+ EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
+ s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
+ EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
+ s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
+ EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
+ s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
+ EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
+ s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
+
return s;
}
diff --git a/hw/exynos4210.h b/hw/exynos4210.h
index 0026a52db..e7522f851 100644
--- a/hw/exynos4210.h
+++ b/hw/exynos4210.h
@@ -119,4 +119,13 @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit);
void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev,
int ext);
+/*
+ * exynos4210 UART
+ */
+DeviceState *exynos4210_uart_create(target_phys_addr_t addr,
+ int fifo_size,
+ int channel,
+ CharDriverState *chr,
+ qemu_irq irq);
+
#endif /* EXYNOS4210_H_ */
diff --git a/hw/exynos4210_uart.c b/hw/exynos4210_uart.c
new file mode 100644
index 000000000..73a9c18f3
--- /dev/null
+++ b/hw/exynos4210_uart.c
@@ -0,0 +1,676 @@
+/*
+ * Exynos4210 UART Emulation
+ *
+ * Copyright (C) 2011 Samsung Electronics Co Ltd.
+ * Maksim Kozlov, <m.kozlov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysbus.h"
+#include "sysemu.h"
+#include "qemu-char.h"
+
+#include "exynos4210.h"
+
+#undef DEBUG_UART
+#undef DEBUG_UART_EXTEND
+#undef DEBUG_IRQ
+#undef DEBUG_Rx_DATA
+#undef DEBUG_Tx_DATA
+
+#define DEBUG_UART 0
+#define DEBUG_UART_EXTEND 0
+#define DEBUG_IRQ 0
+#define DEBUG_Rx_DATA 0
+#define DEBUG_Tx_DATA 0
+
+#if DEBUG_UART
+#define PRINT_DEBUG(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+#if DEBUG_UART_EXTEND
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+#else
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do {} while (0)
+#endif /* EXTEND */
+
+#else
+#define PRINT_DEBUG(fmt, args...) \
+ do {} while (0)
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do {} while (0)
+#endif
+
+#define PRINT_ERROR(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+/*
+ * Offsets for UART registers relative to SFR base address
+ * for UARTn
+ *
+ */
+#define ULCON 0x0000 /* Line Control */
+#define UCON 0x0004 /* Control */
+#define UFCON 0x0008 /* FIFO Control */
+#define UMCON 0x000C /* Modem Control */
+#define UTRSTAT 0x0010 /* Tx/Rx Status */
+#define UERSTAT 0x0014 /* UART Error Status */
+#define UFSTAT 0x0018 /* FIFO Status */
+#define UMSTAT 0x001C /* Modem Status */
+#define UTXH 0x0020 /* Transmit Buffer */
+#define URXH 0x0024 /* Receive Buffer */
+#define UBRDIV 0x0028 /* Baud Rate Divisor */
+#define UFRACVAL 0x002C /* Divisor Fractional Value */
+#define UINTP 0x0030 /* Interrupt Pending */
+#define UINTSP 0x0034 /* Interrupt Source Pending */
+#define UINTM 0x0038 /* Interrupt Mask */
+
+/*
+ * for indexing register in the uint32_t array
+ *
+ * 'reg' - register offset (see offsets definitions above)
+ *
+ */
+#define I_(reg) (reg / sizeof(uint32_t))
+
+typedef struct Exynos4210UartReg {
+ const char *name; /* the only reason is the debug output */
+ target_phys_addr_t offset;
+ uint32_t reset_value;
+} Exynos4210UartReg;
+
+static Exynos4210UartReg exynos4210_uart_regs[] = {
+ {"ULCON", ULCON, 0x00000000},
+ {"UCON", UCON, 0x00003000},
+ {"UFCON", UFCON, 0x00000000},
+ {"UMCON", UMCON, 0x00000000},
+ {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */
+ {"UERSTAT", UERSTAT, 0x00000000}, /* RO */
+ {"UFSTAT", UFSTAT, 0x00000000}, /* RO */
+ {"UMSTAT", UMSTAT, 0x00000000}, /* RO */
+ {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/
+ {"URXH", URXH, 0x00000000}, /* RO */
+ {"UBRDIV", UBRDIV, 0x00000000},
+ {"UFRACVAL", UFRACVAL, 0x00000000},
+ {"UINTP", UINTP, 0x00000000},
+ {"UINTSP", UINTSP, 0x00000000},
+ {"UINTM", UINTM, 0x00000000},
+};
+
+#define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C
+
+/* UART FIFO Control */
+#define UFCON_FIFO_ENABLE 0x1
+#define UFCON_Rx_FIFO_RESET 0x2
+#define UFCON_Tx_FIFO_RESET 0x4
+#define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8
+#define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
+#define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4
+#define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)
+
+/* Uart FIFO Status */
+#define UFSTAT_Rx_FIFO_COUNT 0xff
+#define UFSTAT_Rx_FIFO_FULL 0x100
+#define UFSTAT_Rx_FIFO_ERROR 0x200
+#define UFSTAT_Tx_FIFO_COUNT_SHIFT 16
+#define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
+#define UFSTAT_Tx_FIFO_FULL_SHIFT 24
+#define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)
+
+/* UART Interrupt Source Pending */
+#define UINTSP_RXD 0x1 /* Receive interrupt */
+#define UINTSP_ERROR 0x2 /* Error interrupt */
+#define UINTSP_TXD 0x4 /* Transmit interrupt */
+#define UINTSP_MODEM 0x8 /* Modem interrupt */
+
+/* UART Line Control */
+#define ULCON_IR_MODE_SHIFT 6
+#define ULCON_PARITY_SHIFT 3
+#define ULCON_STOP_BIT_SHIFT 1
+
+/* UART Tx/Rx Status */
+#define UTRSTAT_TRANSMITTER_EMPTY 0x4
+#define UTRSTAT_Tx_BUFFER_EMPTY 0x2
+#define UTRSTAT_Rx_BUFFER_DATA_READY 0x1
+
+/* UART Error Status */
+#define UERSTAT_OVERRUN 0x1
+#define UERSTAT_PARITY 0x2
+#define UERSTAT_FRAME 0x4
+#define UERSTAT_BREAK 0x8
+
+typedef struct {
+ uint8_t *data;
+ uint32_t sp, rp; /* store and retrieve pointers */
+ uint32_t size;
+} Exynos4210UartFIFO;
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
+ Exynos4210UartFIFO rx;
+ Exynos4210UartFIFO tx;
+
+ CharDriverState *chr;
+ qemu_irq irq;
+
+ uint32_t channel;
+
+} Exynos4210UartState;
+
+
+#if DEBUG_UART
+/* Used only for debugging inside PRINT_DEBUG_... macros */
+static const char *exynos4210_uart_regname(target_phys_addr_t offset)
+{
+
+ int regs_number = sizeof(exynos4210_uart_regs) / sizeof(Exynos4210UartReg);
+ int i;
+
+ for (i = 0; i < regs_number; i++) {
+ if (offset == exynos4210_uart_regs[i].offset) {
+ return exynos4210_uart_regs[i].name;
+ }
+ }
+
+ return NULL;
+}
+#endif
+
+
+static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
+{
+ q->data[q->sp] = ch;
+ q->sp = (q->sp + 1) % q->size;
+}
+
+static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
+{
+ uint8_t ret = q->data[q->rp];
+ q->rp = (q->rp + 1) % q->size;
+ return ret;
+}
+
+static int fifo_elements_number(Exynos4210UartFIFO *q)
+{
+ if (q->sp < q->rp) {
+ return q->size - q->rp + q->sp;
+ }
+
+ return q->sp - q->rp;
+}
+
+static int fifo_empty_elements_number(Exynos4210UartFIFO *q)
+{
+ return q->size - fifo_elements_number(q);
+}
+
+static void fifo_reset(Exynos4210UartFIFO *q)
+{
+ if (q->data != NULL) {
+ g_free(q->data);
+ q->data = NULL;
+ }
+
+ q->data = (uint8_t *)g_malloc0(q->size);
+
+ q->sp = 0;
+ q->rp = 0;
+}
+
+static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s)
+{
+ uint32_t level = 0;
+ uint32_t reg;
+
+ reg = (s->reg[I_(UFCON)] && UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
+ UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;
+
+ switch (s->channel) {
+ case 0:
+ level = reg * 32;
+ break;
+ case 1:
+ case 4:
+ level = reg * 8;
+ break;
+ case 2:
+ case 3:
+ level = reg * 2;
+ break;
+ default:
+ level = 0;
+ PRINT_ERROR("Wrong UART channel number: %d\n", s->channel);
+ }
+
+ return level;
+}
+
+static void exynos4210_uart_update_irq(Exynos4210UartState *s)
+{
+ /*
+ * The Tx interrupt is always requested if the number of data in the
+ * transmit FIFO is smaller than the trigger level.
+ */
+ if (s->reg[I_(UFCON)] && UFCON_FIFO_ENABLE) {
+
+ uint32_t count = (s->reg[I_(UFSTAT)] && UFSTAT_Tx_FIFO_COUNT) >>
+ UFSTAT_Tx_FIFO_COUNT_SHIFT;
+
+ if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
+ s->reg[I_(UINTSP)] |= UINTSP_TXD;
+ }
+ }
+
+ s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];
+
+ if (s->reg[I_(UINTP)]) {
+ qemu_irq_raise(s->irq);
+
+#if DEBUG_IRQ
+ fprintf(stderr, "UART%d: IRQ has been raised: %08x\n",
+ s->channel, s->reg[I_(UINTP)]);
+#endif
+
+ } else {
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
+{
+ int speed, parity, data_bits, stop_bits, frame_size;
+ QEMUSerialSetParams ssp;
+ uint64_t uclk_rate;
+
+ if (s->reg[I_(UBRDIV)] == 0) {
+ return;
+ }
+
+ frame_size = 1; /* start bit */
+ if (s->reg[I_(ULCON)] & 0x20) {
+ frame_size++; /* parity bit */
+ if (s->reg[I_(ULCON)] & 0x28) {
+ parity = 'E';
+ } else {
+ parity = 'O';
+ }
+ } else {
+ parity = 'N';
+ }
+
+ if (s->reg[I_(ULCON)] & 0x4) {
+ stop_bits = 2;
+ } else {
+ stop_bits = 1;
+ }
+
+ data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;
+
+ frame_size += data_bits + stop_bits;
+
+ uclk_rate = 24000000;
+
+ speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
+ (s->reg[I_(UFRACVAL)] & 0x7) + 16);
+
+ ssp.speed = speed;
+ ssp.parity = parity;
+ ssp.data_bits = data_bits;
+ ssp.stop_bits = stop_bits;
+
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
+
+ PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n",
+ s->channel, speed, parity, data_bits, stop_bits);
+}
+
+static void exynos4210_uart_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ uint8_t ch;
+
+ PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel,
+ offset, exynos4210_uart_regname(offset), (long long unsigned int)val);
+
+ switch (offset) {
+ case ULCON:
+ case UBRDIV:
+ case UFRACVAL:
+ s->reg[I_(offset)] = val;
+ exynos4210_uart_update_parameters(s);
+ break;
+ case UFCON:
+ s->reg[I_(UFCON)] = val;
+ if (val & UFCON_Rx_FIFO_RESET) {
+ fifo_reset(&s->rx);
+ s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
+ PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel);
+ }
+ if (val & UFCON_Tx_FIFO_RESET) {
+ fifo_reset(&s->tx);
+ s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
+ PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel);
+ }
+ break;
+
+ case UTXH:
+ if (s->chr) {
+ s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
+ UTRSTAT_Tx_BUFFER_EMPTY);
+ ch = (uint8_t)val;
+ qemu_chr_fe_write(s->chr, &ch, 1);
+#if DEBUG_Tx_DATA
+ fprintf(stderr, "%c", ch);
+#endif
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY |
+ UTRSTAT_Tx_BUFFER_EMPTY;
+ s->reg[I_(UINTSP)] |= UINTSP_TXD;
+ exynos4210_uart_update_irq(s);
+ }
+ break;
+
+ case UINTP:
+ s->reg[I_(UINTP)] &= ~val;
+ s->reg[I_(UINTSP)] &= ~val;
+ PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n",
+ s->channel, offset, s->reg[I_(UINTP)]);
+ exynos4210_uart_update_irq(s);
+ break;
+ case UTRSTAT:
+ case UERSTAT:
+ case UFSTAT:
+ case UMSTAT:
+ case URXH:
+ PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n",
+ s->channel, exynos4210_uart_regname(offset), offset);
+ break;
+ case UINTSP:
+ s->reg[I_(UINTSP)] &= ~val;
+ break;
+ case UINTM:
+ s->reg[I_(UINTM)] = val;
+ exynos4210_uart_update_irq(s);
+ break;
+ case UCON:
+ case UMCON:
+ default:
+ s->reg[I_(offset)] = val;
+ break;
+ }
+}
+static uint64_t exynos4210_uart_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ uint32_t res;
+
+ switch (offset) {
+ case UERSTAT: /* Read Only */
+ res = s->reg[I_(UERSTAT)];
+ s->reg[I_(UERSTAT)] = 0;
+ return res;
+ case UFSTAT: /* Read Only */
+ s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
+ if (fifo_empty_elements_number(&s->rx) == 0) {
+ s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL;
+ s->reg[I_(UFSTAT)] &= ~0xff;
+ }
+ return s->reg[I_(UFSTAT)];
+ case URXH:
+ if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
+ if (fifo_elements_number(&s->rx)) {
+ res = fifo_retrieve(&s->rx);
+#if DEBUG_Rx_DATA
+ fprintf(stderr, "%c", res);
+#endif
+ if (!fifo_elements_number(&s->rx)) {
+ s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
+ } else {
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+ } else {
+ s->reg[I_(UINTSP)] |= UINTSP_ERROR;
+ exynos4210_uart_update_irq(s);
+ res = 0;
+ }
+ } else {
+ s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
+ res = s->reg[I_(URXH)];
+ }
+ return res;
+ case UTXH:
+ PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n",
+ s->channel, exynos4210_uart_regname(offset), offset);
+ break;
+ default:
+ return s->reg[I_(offset)];
+ }
+
+ return 0;
+}
+
+static const MemoryRegionOps exynos4210_uart_ops = {
+ .read = exynos4210_uart_read,
+ .write = exynos4210_uart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .max_access_size = 4,
+ .unaligned = false
+ },
+};
+
+static int exynos4210_uart_can_receive(void *opaque)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+
+ return fifo_empty_elements_number(&s->rx);
+}
+
+
+static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ int i;
+
+ if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
+ if (fifo_empty_elements_number(&s->rx) < size) {
+ for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) {
+ fifo_store(&s->rx, buf[i]);
+ }
+ s->reg[I_(UINTSP)] |= UINTSP_ERROR;
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ } else {
+ for (i = 0; i < size; i++) {
+ fifo_store(&s->rx, buf[i]);
+ }
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+ /* XXX: Around here we maybe should check Rx trigger level */
+ s->reg[I_(UINTSP)] |= UINTSP_RXD;
+ } else {
+ s->reg[I_(URXH)] = buf[0];
+ s->reg[I_(UINTSP)] |= UINTSP_RXD;
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+
+ exynos4210_uart_update_irq(s);
+}
+
+
+static void exynos4210_uart_event(void *opaque, int event)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+
+ if (event == CHR_EVENT_BREAK) {
+ /* When the RxDn is held in logic 0, then a null byte is pushed into the
+ * fifo */
+ fifo_store(&s->rx, '\0');
+ s->reg[I_(UERSTAT)] |= UERSTAT_BREAK;
+ exynos4210_uart_update_irq(s);
+ }
+}
+
+
+static void exynos4210_uart_reset(DeviceState *dev)
+{
+ Exynos4210UartState *s =
+ container_of(dev, Exynos4210UartState, busdev.qdev);
+ int regs_number = sizeof(exynos4210_uart_regs)/sizeof(Exynos4210UartReg);
+ int i;
+
+ for (i = 0; i < regs_number; i++) {
+ s->reg[I_(exynos4210_uart_regs[i].offset)] =
+ exynos4210_uart_regs[i].reset_value;
+ }
+
+ fifo_reset(&s->rx);
+ fifo_reset(&s->tx);
+
+ PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size);
+}
+
+static const VMStateDescription vmstate_exynos4210_uart_fifo = {
+ .name = "exynos4210.uart.fifo",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(sp, Exynos4210UartFIFO),
+ VMSTATE_UINT32(rp, Exynos4210UartFIFO),
+ VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, 0, size),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_exynos4210_uart = {
+ .name = "exynos4210.uart",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
+ vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
+ VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
+ EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+DeviceState *exynos4210_uart_create(target_phys_addr_t addr,
+ int fifo_size,
+ int channel,
+ CharDriverState *chr,
+ qemu_irq irq)
+{
+ DeviceState *dev;
+ SysBusDevice *bus;
+
+ const char chr_name[] = "serial";
+ char label[ARRAY_SIZE(chr_name) + 1];
+
+ dev = qdev_create(NULL, "exynos4210.uart");
+
+ if (!chr) {
+ if (channel >= MAX_SERIAL_PORTS) {
+ hw_error("Only %d serial ports are supported by QEMU.\n",
+ MAX_SERIAL_PORTS);
+ }
+ chr = serial_hds[channel];
+ if (!chr) {
+ snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
+ chr = qemu_chr_new(label, "null", NULL);
+ if (!(chr)) {
+ hw_error("Can't assign serial port to UART%d.\n", channel);
+ }
+ }
+ }
+
+ qdev_prop_set_chr(dev, "chardev", chr);
+ qdev_prop_set_uint32(dev, "channel", channel);
+ qdev_prop_set_uint32(dev, "rx-size", fifo_size);
+ qdev_prop_set_uint32(dev, "tx-size", fifo_size);
+
+ bus = sysbus_from_qdev(dev);
+ qdev_init_nofail(dev);
+ if (addr != (target_phys_addr_t)-1) {
+ sysbus_mmio_map(bus, 0, addr);
+ }
+ sysbus_connect_irq(bus, 0, irq);
+
+ return dev;
+}
+
+static int exynos4210_uart_init(SysBusDevice *dev)
+{
+ Exynos4210UartState *s = FROM_SYSBUS(Exynos4210UartState, dev);
+
+ /* memory mapping */
+ memory_region_init_io(&s->iomem, &exynos4210_uart_ops, s, "exynos4210.uart",
+ EXYNOS4210_UART_REGS_MEM_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ sysbus_init_irq(dev, &s->irq);
+
+ qemu_chr_add_handlers(s->chr, exynos4210_uart_can_receive,
+ exynos4210_uart_receive, exynos4210_uart_event, s);
+
+ return 0;
+}
+
+static Property exynos4210_uart_properties[] = {
+ DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
+ DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
+ DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
+ DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void exynos4210_uart_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = exynos4210_uart_init;
+ dc->reset = exynos4210_uart_reset;
+ dc->props = exynos4210_uart_properties;
+ dc->vmsd = &vmstate_exynos4210_uart;
+}
+
+static TypeInfo exynos4210_uart_info = {
+ .name = "exynos4210.uart",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Exynos4210UartState),
+ .class_init = exynos4210_uart_class_init,
+};
+
+static void exynos4210_uart_register(void)
+{
+ type_register_static(&exynos4210_uart_info);
+}
+
+type_init(exynos4210_uart_register)
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-18 08:14:56 +0000