30 files changed, 117 insertions, 110 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 35d449618..6115e4ec0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -480,7 +480,7 @@ S: Maintained
 F: tcg/ia64/
 
 MIPS target
-M: Aurelien Jarno <aurelien@aurel32.ne>
+M: Aurelien Jarno <aurelien@aurel32.net>
 S: Maintained
 F: tcg/mips/
 
diff --git a/block-migration.c b/block-migration.c
index 8d06a2364..0936c7d5e 100644
--- a/block-migration.c
+++ b/block-migration.c
@@ -671,7 +671,7 @@ static int block_load(QEMUFile *f, void *opaque, int version_id)
                 bs_prev = bs;
                 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
                 if (total_sectors <= 0) {
-                    error_report("Error getting length of block device %s\n",
+                    error_report("Error getting length of block device %s",
                                  device_name);
                     return -EINVAL;
                 }
diff --git a/block/qcow2.c b/block/qcow2.c
index 2c51e7ccb..48e1b9568 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -936,7 +936,7 @@ static int qcow2_create2(const char *filename, int64_t total_size,
         (1 << cluster_bits) != cluster_size)
     {
         error_report(
-            "Cluster size must be a power of two between %d and %dk\n",
+            "Cluster size must be a power of two between %d and %dk",
             1 << MIN_CLUSTER_BITS, 1 << (MAX_CLUSTER_BITS - 10));
         return -EINVAL;
     }
diff --git a/block/sheepdog.c b/block/sheepdog.c
index 0392ca8c9..80d106c2b 100644
--- a/block/sheepdog.c
+++ b/block/sheepdog.c
@@ -444,18 +444,12 @@ static SheepdogAIOCB *sd_aio_setup(BlockDriverState *bs, QEMUIOVector *qiov,
 static int sd_schedule_bh(QEMUBHFunc *cb, SheepdogAIOCB *acb)
 {
     if (acb->bh) {
-        error_report("bug: %d %d\n", acb->aiocb_type, acb->aiocb_type);
+        error_report("bug: %d %d", acb->aiocb_type, acb->aiocb_type);
         return -EIO;
     }
 
     acb->bh = qemu_bh_new(cb, acb);
-    if (!acb->bh) {
-        error_report("oom: %d %d\n", acb->aiocb_type, acb->aiocb_type);
-        return -EIO;
-    }
-
     qemu_bh_schedule(acb->bh);
-
     return 0;
 }
 
@@ -598,7 +592,7 @@ static int connect_to_sdog(const char *addr, const char *port)
 
     ret = getaddrinfo(addr, port, &hints, &res0);
     if (ret) {
-        error_report("unable to get address info %s, %s\n",
+        error_report("unable to get address info %s, %s",
                      addr, strerror(errno));
         return -1;
     }
@@ -628,7 +622,7 @@ static int connect_to_sdog(const char *addr, const char *port)
         goto success;
     }
     fd = -1;
-    error_report("failed connect to %s:%s\n", addr, port);
+    error_report("failed connect to %s:%s", addr, port);
 success:
     freeaddrinfo(res0);
     return fd;
@@ -644,7 +638,7 @@ again:
         if (errno == EINTR || errno == EAGAIN) {
             goto again;
         }
-        error_report("failed to recv a rsp, %s\n", strerror(errno));
+        error_report("failed to recv a rsp, %s", strerror(errno));
         return 1;
     }
 
@@ -703,7 +697,7 @@ static int send_req(int sockfd, SheepdogReq *hdr, void *data,
 
     ret = do_writev(sockfd, iov, sizeof(*hdr) + *wlen, 0);
     if (ret) {
-        error_report("failed to send a req, %s\n", strerror(errno));
+        error_report("failed to send a req, %s", strerror(errno));
         ret = -1;
     }
 
@@ -723,7 +717,7 @@ static int do_req(int sockfd, SheepdogReq *hdr, void *data,
 
     ret = do_read(sockfd, hdr, sizeof(*hdr));
     if (ret) {
-        error_report("failed to get a rsp, %s\n", strerror(errno));
+        error_report("failed to get a rsp, %s", strerror(errno));
         ret = -1;
         goto out;
     }
@@ -735,7 +729,7 @@ static int do_req(int sockfd, SheepdogReq *hdr, void *data,
     if (*rlen) {
         ret = do_read(sockfd, data, *rlen);
         if (ret) {
-            error_report("failed to get the data, %s\n", strerror(errno));
+            error_report("failed to get the data, %s", strerror(errno));
             ret = -1;
             goto out;
         }
@@ -772,7 +766,7 @@ static void send_pending_req(BDRVSheepdogState *s, uint64_t oid, uint32_t id)
         ret = add_aio_request(s, aio_req, acb->qiov->iov,
                               acb->qiov->niov, 0, acb->aiocb_type);
         if (ret < 0) {
-            error_report("add_aio_request is failed\n");
+            error_report("add_aio_request is failed");
             free_aio_req(s, aio_req);
             if (QLIST_EMPTY(&acb->aioreq_head)) {
                 sd_finish_aiocb(acb);
@@ -805,7 +799,7 @@ static void aio_read_response(void *opaque)
     /* read a header */
     ret = do_read(fd, &rsp, sizeof(rsp));
     if (ret) {
-        error_report("failed to get the header, %s\n", strerror(errno));
+        error_report("failed to get the header, %s", strerror(errno));
         return;
     }
 
@@ -816,7 +810,7 @@ static void aio_read_response(void *opaque)
         }
     }
     if (!aio_req) {
-        error_report("cannot find aio_req %x\n", rsp.id);
+        error_report("cannot find aio_req %x", rsp.id);
         return;
     }
 
@@ -852,7 +846,7 @@ static void aio_read_response(void *opaque)
         ret = do_readv(fd, acb->qiov->iov, rsp.data_length,
                        aio_req->iov_offset);
         if (ret) {
-            error_report("failed to get the data, %s\n", strerror(errno));
+            error_report("failed to get the data, %s", strerror(errno));
             return;
         }
         break;
@@ -860,7 +854,7 @@ static void aio_read_response(void *opaque)
 
     if (rsp.result != SD_RES_SUCCESS) {
         acb->ret = -EIO;
-        error_report("%s\n", sd_strerror(rsp.result));
+        error_report("%s", sd_strerror(rsp.result));
     }
 
     rest = free_aio_req(s, aio_req);
@@ -917,7 +911,7 @@ static int get_sheep_fd(BDRVSheepdogState *s)
 
     fd = connect_to_sdog(s->addr, s->port);
     if (fd < 0) {
-        error_report("%s\n", strerror(errno));
+        error_report("%s", strerror(errno));
         return -1;
     }
 
@@ -925,7 +919,7 @@ static int get_sheep_fd(BDRVSheepdogState *s)
 
     ret = set_nodelay(fd);
     if (ret) {
-        error_report("%s\n", strerror(errno));
+        error_report("%s", strerror(errno));
         closesocket(fd);
         return -1;
     }
@@ -1041,7 +1035,7 @@ static int find_vdi_name(BDRVSheepdogState *s, char *filename, uint32_t snapid,
     }
 
     if (rsp->result != SD_RES_SUCCESS) {
-        error_report("cannot get vdi info, %s, %s %d %s\n",
+        error_report("cannot get vdi info, %s, %s %d %s",
                      sd_strerror(rsp->result), filename, snapid, tag);
         ret = -1;
         goto out;
@@ -1069,7 +1063,7 @@ static int add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req,
     uint64_t old_oid = aio_req->base_oid;
 
     if (!nr_copies) {
-        error_report("bug\n");
+        error_report("bug");
     }
 
     memset(&hdr, 0, sizeof(hdr));
@@ -1102,14 +1096,14 @@ static int add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req,
     /* send a header */
     ret = do_write(s->fd, &hdr, sizeof(hdr));
     if (ret) {
-        error_report("failed to send a req, %s\n", strerror(errno));
+        error_report("failed to send a req, %s", strerror(errno));
         return -EIO;
     }
 
     if (wlen) {
         ret = do_writev(s->fd, iov, wlen, aio_req->iov_offset);
         if (ret) {
-            error_report("failed to send a data, %s\n", strerror(errno));
+            error_report("failed to send a data, %s", strerror(errno));
             return -EIO;
         }
     }
@@ -1151,7 +1145,7 @@ static int read_write_object(int fd, char *buf, uint64_t oid, int copies,
 
     ret = do_req(fd, (SheepdogReq *)&hdr, buf, &wlen, &rlen);
     if (ret) {
-        error_report("failed to send a request to the sheep\n");
+        error_report("failed to send a request to the sheep");
         return -1;
     }
 
@@ -1159,7 +1153,7 @@ static int read_write_object(int fd, char *buf, uint64_t oid, int copies,
     case SD_RES_SUCCESS:
         return 0;
     default:
-        error_report("%s\n", sd_strerror(rsp->result));
+        error_report("%s", sd_strerror(rsp->result));
         return -1;
     }
 }
@@ -1212,7 +1206,7 @@ static int sd_open(BlockDriverState *bs, const char *filename, int flags)
 
     fd = connect_to_sdog(s->addr, s->port);
     if (fd < 0) {
-        error_report("failed to connect\n");
+        error_report("failed to connect");
         goto out;
     }
 
@@ -1281,7 +1275,7 @@ static int do_sd_create(char *filename, int64_t vdi_size,
     }
 
     if (rsp->result != SD_RES_SUCCESS) {
-        error_report("%s, %s\n", sd_strerror(rsp->result), filename);
+        error_report("%s, %s", sd_strerror(rsp->result), filename);
         return -EIO;
     }
 
@@ -1308,7 +1302,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options)
     memset(vdi, 0, sizeof(vdi));
     memset(tag, 0, sizeof(tag));
     if (parse_vdiname(&s, filename, vdi, &snapid, tag) < 0) {
-        error_report("invalid filename\n");
+        error_report("invalid filename");
         return -EINVAL;
     }
 
@@ -1322,7 +1316,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options)
     }
 
     if (vdi_size > SD_MAX_VDI_SIZE) {
-        error_report("too big image size\n");
+        error_report("too big image size");
         return -EINVAL;
     }
 
@@ -1334,7 +1328,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options)
         /* Currently, only Sheepdog backing image is supported. */
         drv = bdrv_find_protocol(backing_file);
         if (!drv || strcmp(drv->protocol_name, "sheepdog") != 0) {
-            error_report("backing_file must be a sheepdog image\n");
+            error_report("backing_file must be a sheepdog image");
             return -EINVAL;
         }
 
@@ -1345,7 +1339,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options)
         s = bs->opaque;
 
         if (!is_snapshot(&s->inode)) {
-            error_report("cannot clone from a non snapshot vdi\n");
+            error_report("cannot clone from a non snapshot vdi");
             bdrv_delete(bs);
             return -EINVAL;
         }
@@ -1385,7 +1379,7 @@ static void sd_close(BlockDriverState *bs)
 
     if (!ret && rsp->result != SD_RES_SUCCESS &&
         rsp->result != SD_RES_VDI_NOT_LOCKED) {
-        error_report("%s, %s\n", sd_strerror(rsp->result), s->name);
+        error_report("%s, %s", sd_strerror(rsp->result), s->name);
     }
 
     qemu_aio_set_fd_handler(s->fd, NULL, NULL, NULL, NULL, NULL);
@@ -1407,10 +1401,10 @@ static int sd_truncate(BlockDriverState *bs, int64_t offset)
     unsigned int datalen;
 
     if (offset < s->inode.vdi_size) {
-        error_report("shrinking is not supported\n");
+        error_report("shrinking is not supported");
         return -EINVAL;
     } else if (offset > SD_MAX_VDI_SIZE) {
-        error_report("too big image size\n");
+        error_report("too big image size");
         return -EINVAL;
     }
 
@@ -1427,7 +1421,7 @@ static int sd_truncate(BlockDriverState *bs, int64_t offset)
     close(fd);
 
     if (ret < 0) {
-        error_report("failed to update an inode.\n");
+        error_report("failed to update an inode.");
         return -EIO;
     }
 
@@ -1500,7 +1494,7 @@ static int sd_create_branch(BDRVSheepdogState *s)
 
     fd = connect_to_sdog(s->addr, s->port);
     if (fd < 0) {
-        error_report("failed to connect\n");
+        error_report("failed to connect");
         goto out;
     }
 
@@ -1618,7 +1612,7 @@ static void sd_readv_writev_bh_cb(void *p)
         ret = add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov,
                               create, acb->aiocb_type);
         if (ret < 0) {
-            error_report("add_aio_request is failed\n");
+            error_report("add_aio_request is failed");
             free_aio_req(s, aio_req);
             acb->ret = -EIO;
             goto out;
@@ -1695,7 +1689,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
 
     if (s->is_snapshot) {
         error_report("You can't create a snapshot of a snapshot VDI, "
-                     "%s (%" PRIu32 ").\n", s->name, s->inode.vdi_id);
+                     "%s (%" PRIu32 ").", s->name, s->inode.vdi_id);
 
         return -EINVAL;
     }
@@ -1718,7 +1712,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
     ret = write_object(fd, (char *)&s->inode, vid_to_vdi_oid(s->inode.vdi_id),
                        s->inode.nr_copies, datalen, 0, 0);
     if (ret < 0) {
-        error_report("failed to write snapshot's inode.\n");
+        error_report("failed to write snapshot's inode.");
         ret = -EIO;
         goto cleanup;
     }
@@ -1726,7 +1720,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
     ret = do_sd_create(s->name, s->inode.vdi_size, s->inode.vdi_id, &new_vid, 1,
                        s->addr, s->port);
     if (ret < 0) {
-        error_report("failed to create inode for snapshot. %s\n",
+        error_report("failed to create inode for snapshot. %s",
                      strerror(errno));
         ret = -EIO;
         goto cleanup;
@@ -1738,7 +1732,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
                       s->inode.nr_copies, datalen, 0);
 
     if (ret < 0) {
-        error_report("failed to read new inode info. %s\n", strerror(errno));
+        error_report("failed to read new inode info. %s", strerror(errno));
         ret = -EIO;
         goto cleanup;
     }
@@ -1777,14 +1771,14 @@ static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id)
 
     ret = find_vdi_name(s, vdi, snapid, tag, &vid, 1);
     if (ret) {
-        error_report("Failed to find_vdi_name\n");
+        error_report("Failed to find_vdi_name");
         ret = -ENOENT;
         goto out;
     }
 
     fd = connect_to_sdog(s->addr, s->port);
     if (fd < 0) {
-        error_report("failed to connect\n");
+        error_report("failed to connect");
         goto out;
     }
 
@@ -1802,7 +1796,7 @@ static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id)
     memcpy(&s->inode, buf, sizeof(s->inode));
 
     if (!s->inode.vm_state_size) {
-        error_report("Invalid snapshot\n");
+        error_report("Invalid snapshot");
         ret = -ENOENT;
         goto out;
     }
@@ -1819,7 +1813,7 @@ out:
     qemu_free(buf);
     qemu_free(old_s);
 
-    error_report("failed to open. recover old bdrv_sd_state.\n");
+    error_report("failed to open. recover old bdrv_sd_state.");
 
     return ret;
 }
@@ -1874,7 +1868,7 @@ static int sd_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab)
 
     fd = connect_to_sdog(s->addr, s->port);
     if (fd < 0) {
-        error_report("failed to connect\n");
+        error_report("failed to connect");
         goto out;
     }
 
@@ -1948,7 +1942,7 @@ static int do_load_save_vmstate(BDRVSheepdogState *s, uint8_t *data,
         }
 
         if (ret < 0) {
-            error_report("failed to save vmstate %s\n", strerror(errno));
+            error_report("failed to save vmstate %s", strerror(errno));
             ret = -EIO;
             goto cleanup;
         }
diff --git a/blockdev.c b/blockdev.c
index 1502575ac..7d579d612 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -293,7 +293,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
 
     if ((buf = qemu_opt_get(opts, "trans")) != NULL) {
         if (!cyls) {
-            error_report("'%s' trans must be used with cyls,heads and secs",
+            error_report("'%s' trans must be used with cyls, heads and secs",
                          buf);
             return NULL;
         }
diff --git a/configure b/configure
index e523976a7..88159acde 100755
--- a/configure
+++ b/configure
@@ -1640,7 +1640,7 @@ for drv in $audio_drv_list; do
 
     pa)
     audio_drv_probe $drv pulse/simple.h "-lpulse-simple -lpulse" \
-        "pa_simple *s = NULL; pa_simple_free(s); return 0;"
+        "pa_simple *s = 0; pa_simple_free(s); return 0;"
     libs_softmmu="-lpulse -lpulse-simple $libs_softmmu"
     audio_pt_int="yes"
     ;;
@@ -3483,7 +3483,9 @@ for bios_file in $source_path/pc-bios/*.bin $source_path/pc-bios/*.rom $source_p
 done
 mkdir -p $DIRS
 for f in $FILES ; do
-    test -e $f || symlink $source_path/$f $f
+    if [ -e "$source_path/$f" ] && ! [ -e "$f" ]; then
+        symlink "$source_path/$f" "$f"
+    fi
 done
 
 # temporary config to build submodules
diff --git a/console.c b/console.c
index 9c6addf8e..acd8ca162 100644
--- a/console.c
+++ b/console.c
@@ -1349,8 +1349,15 @@ static struct DisplayAllocator default_allocator = {
 static void dumb_display_init(void)
 {
     DisplayState *ds = qemu_mallocz(sizeof(DisplayState));
+    int width = 640;
+    int height = 480;
+
     ds->allocator = &default_allocator;
-    ds->surface = qemu_create_displaysurface(ds, 640, 480);
+    if (is_fixedsize_console()) {
+        width = active_console->g_width;
+        height = active_console->g_height;
+    }
+    ds->surface = qemu_create_displaysurface(ds, width, height);
     register_displaystate(ds);
 }
 
diff --git a/cpus.c b/cpus.c
index e2997941f..abd24ab31 100644
--- a/cpus.c
+++ b/cpus.c
@@ -33,7 +33,10 @@
 
 #include "qemu-thread.h"
 #include "cpus.h"
+
+#ifndef _WIN32
 #include "compatfd.h"
+#endif
 
 #ifdef SIGRTMIN
 #define SIG_IPI (SIGRTMIN+4)
diff --git a/exec.c b/exec.c
index 21507fb4a..4c4529990 100644
--- a/exec.c
+++ b/exec.c
@@ -1207,12 +1207,16 @@ static inline void tb_alloc_page(TranslationBlock *tb,
                                  unsigned int n, tb_page_addr_t page_addr)
 {
     PageDesc *p;
-    TranslationBlock *last_first_tb;
+#ifndef CONFIG_USER_ONLY
+    bool page_already_protected;
+#endif
 
     tb->page_addr[n] = page_addr;
     p = page_find_alloc(page_addr >> TARGET_PAGE_BITS, 1);
     tb->page_next[n] = p->first_tb;
-    last_first_tb = p->first_tb;
+#ifndef CONFIG_USER_ONLY
+    page_already_protected = p->first_tb != NULL;
+#endif
     p->first_tb = (TranslationBlock *)((long)tb | n);
     invalidate_page_bitmap(p);
 
@@ -1248,7 +1252,7 @@ static inline void tb_alloc_page(TranslationBlock *tb,
     /* if some code is already present, then the pages are already
        protected. So we handle the case where only the first TB is
        allocated in a physical page */
-    if (!last_first_tb) {
+    if (!page_already_protected) {
         tlb_protect_code(page_addr);
     }
 #endif
diff --git a/hw/armv7m.c b/hw/armv7m.c
index 72d010a63..83f3393ea 100644
--- a/hw/armv7m.c
+++ b/hw/armv7m.c
@@ -4,7 +4,7 @@
  * Copyright (c) 2006-2007 CodeSourcery.
  * Written by Paul Brook
  *
- * This code is licenced under the GPL.
+ * This code is licensed under the GPL.
  */
 
 #include "sysbus.h"
@@ -14,7 +14,7 @@
 
 /* Bitbanded IO.  Each word corresponds to a single bit.  */
 
-/* Get the byte address of the real memory for a bitband acess.  */
+/* Get the byte address of the real memory for a bitband access.  */
 static inline uint32_t bitband_addr(void * opaque, uint32_t addr)
 {
     uint32_t res;
diff --git a/hw/lm32_sys.c b/hw/lm32_sys.c
index 427b05fe1..e5ff962f4 100644
--- a/hw/lm32_sys.c
+++ b/hw/lm32_sys.c
@@ -83,7 +83,7 @@ static void sys_write(void *opaque, target_phys_addr_t addr, uint32_t value)
         break;
 
     default:
-        error_report("lm32_sys: write access to unkown register 0x"
+        error_report("lm32_sys: write access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
diff --git a/hw/lm32_timer.c b/hw/lm32_timer.c
index ed289847a..49cbb2299 100644
--- a/hw/lm32_timer.c
+++ b/hw/lm32_timer.c
@@ -86,7 +86,7 @@ static uint32_t timer_read(void *opaque, target_phys_addr_t addr)
         r = (uint32_t)ptimer_get_count(s->ptimer);
         break;
     default:
-        error_report("lm32_timer: read access to unkown register 0x"
+        error_report("lm32_timer: read access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
@@ -124,7 +124,7 @@ static void timer_write(void *opaque, target_phys_addr_t addr, uint32_t value)
                 TARGET_FMT_plx, addr << 2);
         break;
     default:
-        error_report("lm32_timer: write access to unkown register 0x"
+        error_report("lm32_timer: write access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
diff --git a/hw/lm32_uart.c b/hw/lm32_uart.c
index e225087b9..09090e93b 100644
--- a/hw/lm32_uart.c
+++ b/hw/lm32_uart.c
@@ -149,7 +149,7 @@ static uint32_t uart_read(void *opaque, target_phys_addr_t addr)
                 TARGET_FMT_plx, addr << 2);
         break;
     default:
-        error_report("lm32_uart: read access to unkown register 0x"
+        error_report("lm32_uart: read access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
@@ -185,7 +185,7 @@ static void uart_write(void *opaque, target_phys_addr_t addr, uint32_t value)
                 TARGET_FMT_plx, addr << 2);
         break;
     default:
-        error_report("lm32_uart: write access to unkown register 0x"
+        error_report("lm32_uart: write access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
diff --git a/hw/milkymist-ac97.c b/hw/milkymist-ac97.c
index 6c9e318aa..6104732f7 100644
--- a/hw/milkymist-ac97.c
+++ b/hw/milkymist-ac97.c
@@ -103,7 +103,7 @@ static uint32_t ac97_read(void *opaque, target_phys_addr_t addr)
         break;
 
     default:
-        error_report("milkymist_ac97: read access to unkown register 0x"
+        error_report("milkymist_ac97: read access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
@@ -152,7 +152,7 @@ static void ac97_write(void *opaque, target_phys_addr_t addr, uint32_t value)
         break;
 
     default:
-        error_report("milkymist_ac97: write access to unkown register 0x"
+        error_report("milkymist_ac97: write access to unknown register 0x"
                 TARGET_FMT_plx, addr);
         break;
     }
diff --git a/hw/milkymist-memcard.c b/hw/milkymist-memcard.c
index 06077af82..22dc377d7 100644
--- a/hw/milkymist-memcard.c
+++ b/hw/milkymist-memcard.c
@@ -154,7 +154,7 @@ static uint32_t memcard_read(void *opaque, target_phys_addr_t addr)
         break;
 
     default:
-        error_report("milkymist_memcard: read access to unkown register 0x"
+        error_report("milkymist_memcard: read access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
@@ -210,7 +210,7 @@ static void memcard_write(void *opaque, target_phys_addr_t addr, uint32_t value)
         break;
 
     default:
-        error_report("milkymist_memcard: write access to unkown register 0x"
+        error_report("milkymist_memcard: write access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
diff --git a/hw/milkymist-minimac2.c b/hw/milkymist-minimac2.c
index c4e28187b..cd360264c 100644
--- a/hw/milkymist-minimac2.c
+++ b/hw/milkymist-minimac2.c
@@ -234,20 +234,20 @@ static void minimac2_tx(MilkymistMinimac2State *s)
     uint8_t *buf = s->tx_buf;
 
     if (txcount < 64) {
-        error_report("milkymist_minimac2: ethernet frame too small (%u < %u)\n",
+        error_report("milkymist_minimac2: ethernet frame too small (%u < %u)",
                 txcount, 64);
         goto err;
     }
 
     if (txcount > MINIMAC2_MTU) {
-        error_report("milkymist_minimac2: MTU exceeded (%u > %u)\n",
+        error_report("milkymist_minimac2: MTU exceeded (%u > %u)",
                 txcount, MINIMAC2_MTU);
         goto err;
     }
 
     if (memcmp(buf, preamble_sfd, 8) != 0) {
         error_report("milkymist_minimac2: frame doesn't contain the preamble "
-                "and/or the SFD (%02x %02x %02x %02x %02x %02x %02x %02x)\n",
+                "and/or the SFD (%02x %02x %02x %02x %02x %02x %02x %02x)",
                 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
         goto err;
     }
diff --git a/hw/milkymist-pfpu.c b/hw/milkymist-pfpu.c
index 94e631510..306d1ce28 100644
--- a/hw/milkymist-pfpu.c
+++ b/hw/milkymist-pfpu.c
@@ -301,7 +301,7 @@ static int pfpu_decode_insn(MilkymistPFPUState *s)
     } break;
 
     default:
-        error_report("milkymist_pfpu: unknown opcode %d\n", op);
+        error_report("milkymist_pfpu: unknown opcode %d", op);
         break;
     }
 
@@ -358,7 +358,7 @@ static void pfpu_start(MilkymistPFPUState *s)
                 /* decode at most MICROCODE_WORDS instructions */
                 if (i++ >= MICROCODE_WORDS) {
                     error_report("milkymist_pfpu: too many instructions "
-                            "executed in microcode. No VECTOUT?\n");
+                            "executed in microcode. No VECTOUT?");
                     break;
                 }
             }
diff --git a/hw/milkymist-softusb.c b/hw/milkymist-softusb.c
index 028f3b79a..5ab35c382 100644
--- a/hw/milkymist-softusb.c
+++ b/hw/milkymist-softusb.c
@@ -131,7 +131,7 @@ static inline void softusb_read_dmem(MilkymistSoftUsbState *s,
 {
     if (offset + len >= s->dmem_size) {
         error_report("milkymist_softusb: read dmem out of bounds "
-                "at offset 0x%x, len %d\n", offset, len);
+                "at offset 0x%x, len %d", offset, len);
         return;
     }
 
@@ -143,7 +143,7 @@ static inline void softusb_write_dmem(MilkymistSoftUsbState *s,
 {
     if (offset + len >= s->dmem_size) {
         error_report("milkymist_softusb: write dmem out of bounds "
-                "at offset 0x%x, len %d\n", offset, len);
+                "at offset 0x%x, len %d", offset, len);
         return;
     }
 
@@ -155,7 +155,7 @@ static inline void softusb_read_pmem(MilkymistSoftUsbState *s,
 {
     if (offset + len >= s->pmem_size) {
         error_report("milkymist_softusb: read pmem out of bounds "
-                "at offset 0x%x, len %d\n", offset, len);
+                "at offset 0x%x, len %d", offset, len);
         return;
     }
 
@@ -167,7 +167,7 @@ static inline void softusb_write_pmem(MilkymistSoftUsbState *s,
 {
     if (offset + len >= s->pmem_size) {
         error_report("milkymist_softusb: write pmem out of bounds "
-                "at offset 0x%x, len %d\n", offset, len);
+                "at offset 0x%x, len %d", offset, len);
         return;
     }
 
diff --git a/hw/milkymist-sysctl.c b/hw/milkymist-sysctl.c
index 6bd0cb974..7b2d544ac 100644
--- a/hw/milkymist-sysctl.c
+++ b/hw/milkymist-sysctl.c
@@ -119,7 +119,7 @@ static uint32_t sysctl_read(void *opaque, target_phys_addr_t addr)
         break;
 
     default:
-        error_report("milkymist_sysctl: read access to unkown register 0x"
+        error_report("milkymist_sysctl: read access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
@@ -189,7 +189,7 @@ static void sysctl_write(void *opaque, target_phys_addr_t addr, uint32_t value)
         break;
 
     default:
-        error_report("milkymist_sysctl: write access to unkown register 0x"
+        error_report("milkymist_sysctl: write access to unknown register 0x"
                 TARGET_FMT_plx, addr << 2);
         break;
     }
diff --git a/hw/milkymist-tmu2.c b/hw/milkymist-tmu2.c
index 9cebe3173..790cdcb41 100644
--- a/hw/milkymist-tmu2.c
+++ b/hw/milkymist-tmu2.c
@@ -352,21 +352,21 @@ static uint32_t tmu2_read(void *opaque, target_phys_addr_t addr)
 static void tmu2_check_registers(MilkymistTMU2State *s)
 {
     if (s->regs[R_BRIGHTNESS] > MAX_BRIGHTNESS) {
-        error_report("milkymist_tmu2: max brightness is %d\n", MAX_BRIGHTNESS);
+        error_report("milkymist_tmu2: max brightness is %d", MAX_BRIGHTNESS);
     }
 
     if (s->regs[R_ALPHA] > MAX_ALPHA) {
-        error_report("milkymist_tmu2: max alpha is %d\n", MAX_ALPHA);
+        error_report("milkymist_tmu2: max alpha is %d", MAX_ALPHA);
     }
 
     if (s->regs[R_VERTICESADDR] & 0x07) {
         error_report("milkymist_tmu2: vertex mesh address has to be 64-bit "
-                "aligned\n");
+                "aligned");
     }
 
     if (s->regs[R_TEXFBUF] & 0x01) {
         error_report("milkymist_tmu2: texture buffer address has to be "
-                "16-bit aligned\n");
+                "16-bit aligned");
     }
 }
 
diff --git a/hw/qdev.c b/hw/qdev.c
index 298790198..292b52f8c 100644
--- a/hw/qdev.c
+++ b/hw/qdev.c
@@ -371,7 +371,7 @@ void qdev_init_nofail(DeviceState *dev)
     DeviceInfo *info = dev->info;
 
     if (qdev_init(dev) < 0) {
-        error_report("Initialization of device %s failed\n", info->name);
+        error_report("Initialization of device %s failed", info->name);
         exit(1);
     }
 }
diff --git a/hw/strongarm.c b/hw/strongarm.c
index de08bdf67..0e03d61a1 100644
--- a/hw/strongarm.c
+++ b/hw/strongarm.c
@@ -1536,14 +1536,14 @@ StrongARMState *sa1110_init(unsigned int sdram_size, const char *rev)
     }
 
     if (strncmp(rev, "sa1110", 6)) {
-        error_report("Machine requires a SA1110 processor.\n");
+        error_report("Machine requires a SA1110 processor.");
         exit(1);
     }
 
     s->env = cpu_init(rev);
 
     if (!s->env) {
-        error_report("Unable to find CPU definition\n");
+        error_report("Unable to find CPU definition");
         exit(1);
     }
 
diff --git a/hw/usb-ccid.c b/hw/usb-ccid.c
index 59c643167..524b841da 100644
--- a/hw/usb-ccid.c
+++ b/hw/usb-ccid.c
@@ -1240,7 +1240,7 @@ static int ccid_card_init(DeviceState *qdev, DeviceInfo *base)
         return -1;
     }
     if (s->card != NULL) {
-        error_report("Warning: usb-ccid card already full, not adding\n");
+        error_report("Warning: usb-ccid card already full, not adding");
         return -1;
     }
     ret = info->initfn ? info->initfn(card) : ret;
diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c
index 9a1210498..bff4004bc 100644
--- a/hw/virtio-serial-bus.c
+++ b/hw/virtio-serial-bus.c
@@ -337,7 +337,7 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
     switch(cpkt.event) {
     case VIRTIO_CONSOLE_DEVICE_READY:
         if (!cpkt.value) {
-            error_report("virtio-serial-bus: Guest failure in adding device %s\n",
+            error_report("virtio-serial-bus: Guest failure in adding device %s",
                          vser->bus.qbus.name);
             break;
         }
@@ -352,7 +352,7 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
 
     case VIRTIO_CONSOLE_PORT_READY:
         if (!cpkt.value) {
-            error_report("virtio-serial-bus: Guest failure in adding port %u for device %s\n",
+            error_report("virtio-serial-bus: Guest failure in adding port %u for device %s",
                          port->id, vser->bus.qbus.name);
             break;
         }
@@ -741,7 +741,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
     plugging_port0 = info->is_console && !find_port_by_id(port->vser, 0);
 
     if (find_port_by_id(port->vser, port->id)) {
-        error_report("virtio-serial-bus: A port already exists at id %u\n",
+        error_report("virtio-serial-bus: A port already exists at id %u",
                      port->id);
         return -1;
     }
@@ -752,7 +752,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
         } else {
             port->id = find_free_port_id(port->vser);
             if (port->id == VIRTIO_CONSOLE_BAD_ID) {
-                error_report("virtio-serial-bus: Maximum port limit for this device reached\n");
+                error_report("virtio-serial-bus: Maximum port limit for this device reached");
                 return -1;
             }
         }
@@ -760,7 +760,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
 
     max_nr_ports = tswap32(port->vser->config.max_nr_ports);
     if (port->id >= max_nr_ports) {
-        error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u\n",
+        error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u",
                      max_nr_ports - 1);
         return -1;
     }
diff --git a/hw/virtio.c b/hw/virtio.c
index e6043de82..cc47a06a4 100644
--- a/hw/virtio.c
+++ b/hw/virtio.c
@@ -797,7 +797,7 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f)
             /* Check it isn't doing very strange things with descriptor numbers. */
             if (nheads > vdev->vq[i].vring.num) {
                 error_report("VQ %d size 0x%x Guest index 0x%x "
-                             "inconsistent with Host index 0x%x: delta 0x%x\n",
+                             "inconsistent with Host index 0x%x: delta 0x%x",
                              i, vdev->vq[i].vring.num,
                              vring_avail_idx(&vdev->vq[i]),
                              vdev->vq[i].last_avail_idx, nheads);
@@ -805,7 +805,7 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f)
             }
         } else if (vdev->vq[i].last_avail_idx) {
             error_report("VQ %d address 0x0 "
-                         "inconsistent with Host index 0x%x\n",
+                         "inconsistent with Host index 0x%x",
                          i, vdev->vq[i].last_avail_idx);
                 return -1;
 	}
diff --git a/net.c b/net.c
index a104976b0..66123ad40 100644
--- a/net.c
+++ b/net.c
@@ -710,7 +710,7 @@ int qemu_find_nic_model(NICInfo *nd, const char * const *models,
             return i;
     }
 
-    error_report("qemu: Unsupported NIC model: %s", nd->model);
+    error_report("Unsupported NIC model: %s", nd->model);
     return -1;
 }
 
diff --git a/net/socket.c b/net/socket.c
index 7337f4fa1..bc1bf5889 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -530,7 +530,7 @@ int net_init_socket(QemuOpts *opts,
             qemu_opt_get(opts, "connect") ||
             qemu_opt_get(opts, "mcast") ||
             qemu_opt_get(opts, "localaddr")) {
-            error_report("listen=, connect=, mcast= and localaddr= is invalid with fd=\n");
+            error_report("listen=, connect=, mcast= and localaddr= is invalid with fd=");
             return -1;
         }
 
@@ -550,7 +550,7 @@ int net_init_socket(QemuOpts *opts,
             qemu_opt_get(opts, "connect") ||
             qemu_opt_get(opts, "mcast") ||
             qemu_opt_get(opts, "localaddr")) {
-            error_report("fd=, connect=, mcast= and localaddr= is invalid with listen=\n");
+            error_report("fd=, connect=, mcast= and localaddr= is invalid with listen=");
             return -1;
         }
 
@@ -566,7 +566,7 @@ int net_init_socket(QemuOpts *opts,
             qemu_opt_get(opts, "listen") ||
             qemu_opt_get(opts, "mcast") ||
             qemu_opt_get(opts, "localaddr")) {
-            error_report("fd=, listen=, mcast= and localaddr= is invalid with connect=\n");
+            error_report("fd=, listen=, mcast= and localaddr= is invalid with connect=");
             return -1;
         }
 
diff --git a/qemu-common.h b/qemu-common.h
index 109498dd4..abd7a75b7 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -112,11 +112,6 @@ static inline char *realpath(const char *path, char *resolved_path)
     _fullpath(resolved_path, path, _MAX_PATH);
     return resolved_path;
 }
-
-#define PRId64 "I64d"
-#define PRIx64 "I64x"
-#define PRIu64 "I64u"
-#define PRIo64 "I64o"
 #endif
 
 /* FIXME: Remove NEED_CPU_H.  */
diff --git a/qemu-error.c b/qemu-error.c
index 41c191d52..4b20d283a 100644
--- a/qemu-error.c
+++ b/qemu-error.c
@@ -193,6 +193,8 @@ void error_print_loc(void)
 
 /*
  * Print an error message to current monitor if we have one, else to stderr.
+ * Format arguments like sprintf().  The result should not contain
+ * newlines.
  * Prepend the current location and append a newline.
  * It's wrong to call this in a QMP monitor.  Use qerror_report() there.
  */
diff --git a/qemu-img.c b/qemu-img.c
index 4f162d1ab..32628b311 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -304,11 +304,11 @@ static int img_create(int argc, char **argv)
             fmt = optarg;
             break;
         case 'e':
-            error_report("qemu-img: option -e is deprecated, please use \'-o "
+            error_report("option -e is deprecated, please use \'-o "
                   "encryption\' instead!");
             return 1;
         case '6':
-            error_report("qemu-img: option -6 is deprecated, please use \'-o "
+            error_report("option -6 is deprecated, please use \'-o "
                   "compat6\' instead!");
             return 1;
         case 'o':
@@ -633,11 +633,11 @@ static int img_convert(int argc, char **argv)
             compress = 1;
             break;
         case 'e':
-            error_report("qemu-img: option -e is deprecated, please use \'-o "
+            error_report("option -e is deprecated, please use \'-o "
                   "encryption\' instead!");
             return 1;
         case '6':
-            error_report("qemu-img: option -6 is deprecated, please use \'-o "
+            error_report("option -6 is deprecated, please use \'-o "
                   "compat6\' instead!");
             return 1;
         case 'o':
@@ -690,12 +690,12 @@ static int img_convert(int argc, char **argv)
 
     if (snapshot_name != NULL) {
         if (bs_n > 1) {
-            error_report("No support for concatenating multiple snapshot\n");
+            error_report("No support for concatenating multiple snapshot");
             ret = -1;
             goto out;
         }
         if (bdrv_snapshot_load_tmp(bs[0], snapshot_name) < 0) {
-            error_report("Failed to load snapshot\n");
+            error_report("Failed to load snapshot");
             ret = -1;
             goto out;
         }