aboutsummaryrefslogtreecommitdiffstats
path: root/hw/spapr.h
diff options
context:
space:
mode:
authorDavid Gibson <david@gibson.dropbear.id.au>2011-04-01 15:15:20 +1100
committerAlexander Graf <agraf@suse.de>2011-04-01 18:34:55 +0200
commit9fdf0c2995d04a74a22ea4609b2931eef209e53d (patch)
tree827b30000a29039442a233eac421805e5b598097 /hw/spapr.h
parent9d52e9079da4f28abd788faf39e64fbf4b305561 (diff)
Start implementing pSeries logical partition machine
This patch adds a "pseries" machine to qemu. This aims to emulate a logical partition on an IBM pSeries machine, compliant to the "PowerPC Architecture Platform Requirements" (PAPR) document. This initial version is quite limited, it implements a basic machine and PAPR hypercall emulation. So far only one hypercall is present - H_PUT_TERM_CHAR - so that a (write-only) console is available. Multiple CPUs are permitted, with SMP entry handled kexec() style. The machine so far more resembles an old POWER4 style "full system partition" rather than a modern LPAR, in that the guest manages the page tables directly, rather than via hypercalls. The machine requires qemu to be configured with --enable-fdt. The machine can (so far) only be booted with -kernel - i.e. no partition firmware is provided. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Diffstat (limited to 'hw/spapr.h')
-rw-r--r--hw/spapr.h257
1 files changed, 257 insertions, 0 deletions
diff --git a/hw/spapr.h b/hw/spapr.h
new file mode 100644
index 000000000..685944b0f
--- /dev/null
+++ b/hw/spapr.h
@@ -0,0 +1,257 @@
+#if !defined(__HW_SPAPR_H__)
+#define __HW_SPAPR_H__
+
+typedef struct sPAPREnvironment {
+} sPAPREnvironment;
+
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+#define H_MULTI_THREADS_ACTIVE -9005
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later. This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying. If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE (1ULL<<(63-16))
+#define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
+#define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30)))
+#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
+#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
+#define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */
+#define H_ANDCOND (1ULL<<(63-33))
+#define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE (1ULL<<(63-49))
+#define H_N (1ULL<<(63-61))
+#define H_PP1 (1ULL<<(63-62))
+#define H_PP2 (1ULL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID 0
+#define H_VASI_ENABLED 1
+#define H_VASI_ABORTED 2
+#define H_VASI_SUSPENDING 3
+#define H_VASI_SUSPENDED 4
+#define H_VASI_RESUMED 5
+#define H_VASI_COMPLETED 6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR (1ULL<<(63-61))
+#define H_DABRX_KERNEL (1ULL<<(63-62))
+#define H_DABRX_USER (1ULL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT 4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE 0x04
+#define H_ENTER 0x08
+#define H_READ 0x0c
+#define H_CLEAR_MOD 0x10
+#define H_CLEAR_REF 0x14
+#define H_PROTECT 0x18
+#define H_GET_TCE 0x1c
+#define H_PUT_TCE 0x20
+#define H_SET_SPRG0 0x24
+#define H_SET_DABR 0x28
+#define H_PAGE_INIT 0x2c
+#define H_SET_ASR 0x30
+#define H_ASR_ON 0x34
+#define H_ASR_OFF 0x38
+#define H_LOGICAL_CI_LOAD 0x3c
+#define H_LOGICAL_CI_STORE 0x40
+#define H_LOGICAL_CACHE_LOAD 0x44
+#define H_LOGICAL_CACHE_STORE 0x48
+#define H_LOGICAL_ICBI 0x4c
+#define H_LOGICAL_DCBF 0x50
+#define H_GET_TERM_CHAR 0x54
+#define H_PUT_TERM_CHAR 0x58
+#define H_REAL_TO_LOGICAL 0x5c
+#define H_HYPERVISOR_DATA 0x60
+#define H_EOI 0x64
+#define H_CPPR 0x68
+#define H_IPI 0x6c
+#define H_IPOLL 0x70
+#define H_XIRR 0x74
+#define H_PERFMON 0x7c
+#define H_MIGRATE_DMA 0x78
+#define H_REGISTER_VPA 0xDC
+#define H_CEDE 0xE0
+#define H_CONFER 0xE4
+#define H_PROD 0xE8
+#define H_GET_PPP 0xEC
+#define H_SET_PPP 0xF0
+#define H_PURR 0xF4
+#define H_PIC 0xF8
+#define H_REG_CRQ 0xFC
+#define H_FREE_CRQ 0x100
+#define H_VIO_SIGNAL 0x104
+#define H_SEND_CRQ 0x108
+#define H_COPY_RDMA 0x110
+#define H_REGISTER_LOGICAL_LAN 0x114
+#define H_FREE_LOGICAL_LAN 0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN 0x120
+#define H_BULK_REMOVE 0x124
+#define H_MULTICAST_CTRL 0x130
+#define H_SET_XDABR 0x134
+#define H_STUFF_TCE 0x138
+#define H_PUT_TCE_INDIRECT 0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO 0x150
+#define H_REGISTER_VTERM 0x154
+#define H_FREE_VTERM 0x158
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
+#define H_ILLAN_ATTRIBUTES 0x244
+#define H_MODIFY_HEA_QP 0x250
+#define H_QUERY_HEA_QP 0x254
+#define H_QUERY_HEA 0x258
+#define H_QUERY_HEA_PORT 0x25C
+#define H_MODIFY_HEA_PORT 0x260
+#define H_REG_BCMC 0x264
+#define H_DEREG_BCMC 0x268
+#define H_REGISTER_HEA_RPAGES 0x26C
+#define H_DISABLE_AND_GET_HEA 0x270
+#define H_GET_HEA_INFO 0x274
+#define H_ALLOC_HEA_RESOURCE 0x278
+#define H_ADD_CONN 0x284
+#define H_DEL_CONN 0x288
+#define H_JOIN 0x298
+#define H_VASI_STATE 0x2A4
+#define H_ENABLE_CRQ 0x2B0
+#define H_GET_EM_PARMS 0x2B8
+#define H_SET_MPP 0x2D0
+#define H_GET_MPP 0x2D4
+#define MAX_HCALL_OPCODE H_GET_MPP
+
+extern sPAPREnvironment *spapr;
+
+/*#define DEBUG_SPAPR_HCALLS*/
+
+#ifdef DEBUG_SPAPR_HCALLS
+#define hcall_dprintf(fmt, ...) \
+ do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
+#else
+#define hcall_dprintf(fmt, ...) \
+ do { } while (0)
+#endif
+
+typedef target_ulong (*spapr_hcall_fn)(CPUState *env, sPAPREnvironment *spapr,
+ target_ulong opcode,
+ target_ulong *args);
+
+void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
+target_ulong spapr_hypercall(CPUState *env, target_ulong opcode,
+ target_ulong *args);
+
+#endif /* !defined (__HW_SPAPR_H__) */