diff options
| author | Isaku Yamahata <yamahata@valinux.co.jp> | 2010-10-20 17:18:51 +0900 |
|---|---|---|
| committer | Michael S. Tsirkin <mst@redhat.com> | 2010-10-20 12:05:10 +0200 |
| commit | 0208def1cadd4f72f862e62548c2af268a543b20 (patch) | |
| tree | ead3f1ff630bb7befced3d273b819b68ddedb639 /hw/pci_bridge.c | |
| parent | 6da6d29fa63ab7adcc2959355497a44654f3703e (diff) | |
pci/bridge: fix pci_bridge_reset()
The lower bits of base/limit registers is RO and shouldn't be zero
cleared on reset. This patch fixes it.
In fact, the default value of base/limit registers aren't specified
in the spec. And some bridges disable forwarding on reset instead of
zeroing base/limit registers.
So introduce one function to disable bridge forwarding so that
such bridges can use it. It will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Diffstat (limited to 'hw/pci_bridge.c')
| -rw-r--r-- | hw/pci_bridge.c | 48 |
1 files changed, 42 insertions, 6 deletions
diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c index 638e3b35e..7e8488a4f 100644 --- a/hw/pci_bridge.c +++ b/hw/pci_bridge.c @@ -151,6 +151,26 @@ void pci_bridge_write_config(PCIDevice *d, } } +void pci_bridge_disable_base_limit(PCIDevice *dev) +{ + uint8_t *conf = dev->config; + + pci_byte_test_and_set_mask(conf + PCI_IO_BASE, + PCI_IO_RANGE_MASK & 0xff); + pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT, + PCI_IO_RANGE_MASK & 0xff); + pci_word_test_and_set_mask(conf + PCI_MEMORY_BASE, + PCI_MEMORY_RANGE_MASK & 0xffff); + pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT, + PCI_MEMORY_RANGE_MASK & 0xffff); + pci_word_test_and_set_mask(conf + PCI_PREF_MEMORY_BASE, + PCI_PREF_RANGE_MASK & 0xffff); + pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT, + PCI_PREF_RANGE_MASK & 0xffff); + pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0); + pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0); +} + /* reset bridge specific configuration registers */ void pci_bridge_reset_reg(PCIDevice *dev) { @@ -161,12 +181,28 @@ void pci_bridge_reset_reg(PCIDevice *dev) conf[PCI_SUBORDINATE_BUS] = 0; conf[PCI_SEC_LATENCY_TIMER] = 0; - conf[PCI_IO_BASE] = 0; - conf[PCI_IO_LIMIT] = 0; - pci_set_word(conf + PCI_MEMORY_BASE, 0); - pci_set_word(conf + PCI_MEMORY_LIMIT, 0); - pci_set_word(conf + PCI_PREF_MEMORY_BASE, 0); - pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0); + /* + * the default values for base/limit registers aren't specified + * in the PCI-to-PCI-bridge spec. So we don't thouch them here. + * Each implementation can override it. + * typical implementation does + * zero base/limit registers or + * disable forwarding: pci_bridge_disable_base_limit() + * If disable forwarding is wanted, call pci_bridge_disable_base_limit() + * after this function. + */ + pci_byte_test_and_clear_mask(conf + PCI_IO_BASE, + PCI_IO_RANGE_MASK & 0xff); + pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT, + PCI_IO_RANGE_MASK & 0xff); + pci_word_test_and_clear_mask(conf + PCI_MEMORY_BASE, + PCI_MEMORY_RANGE_MASK & 0xffff); + pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT, + PCI_MEMORY_RANGE_MASK & 0xffff); + pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_BASE, + PCI_PREF_RANGE_MASK & 0xffff); + pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT, + PCI_PREF_RANGE_MASK & 0xffff); pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0); pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0); |