Add support for eccmemctl (Robert Reif)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3785 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 266 insertions, 0 deletions

diff --git a/hw/eccmemctl.c b/hw/eccmemctl.c
new file mode 100755
index 000000000..0b44fabce
--- /dev/null
+++ b/hw/eccmemctl.c
@@ -0,0 +1,266 @@
+/*
+ * QEMU Sparc Sun4m ECC memory controller emulation
+ *
+ * Copyright (c) 2007 Robert Reif
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw.h"
+#include "sun4m.h"
+#include "sysemu.h"
+
+//#define DEBUG_ECC
+
+#ifdef DEBUG_ECC
+#define DPRINTF(fmt, args...)                           \
+    do { printf("ECC: " fmt , ##args); } while (0)
+#else
+#define DPRINTF(fmt, args...)
+#endif
+
+/* There are 3 versions of this chip used in SMP sun4m systems:
+ * MCC (version 0, implementation 0) SS-600MP
+ * EMC (version 0, implementation 1) SS-10
+ * SMC (version 0, implementation 2) SS-10SX and SS-20
+ */
+
+/* Register offsets */
+#define ECC_FCR_REG    0
+#define ECC_FSR_REG    8
+#define ECC_FAR0_REG   16
+#define ECC_FAR1_REG   20
+#define ECC_DIAG_REG   24
+
+/* ECC fault control register */
+#define ECC_FCR_EE     0x00000001      /* Enable ECC checking */
+#define ECC_FCR_EI     0x00000010      /* Enable Interrupts on correctable errors */
+#define ECC_FCR_VER    0x0f000000      /* Version */
+#define ECC_FCR_IMPL   0xf0000000      /* Implementation */
+
+/* ECC fault status register */
+#define ECC_FSR_CE     0x00000001      /* Correctable error */
+#define ECC_FSR_BS     0x00000002      /* C2 graphics bad slot access */
+#define ECC_FSR_TO     0x00000004      /* Timeout on write */
+#define ECC_FSR_UE     0x00000008      /* Uncorrectable error */
+#define ECC_FSR_DW     0x000000f0      /* Index of double word in block */
+#define ECC_FSR_SYND   0x0000ff00      /* Syndrome for correctable error */
+#define ECC_FSR_ME     0x00010000      /* Multiple errors */
+#define ECC_FSR_C2ERR  0x00020000      /* C2 graphics error */
+
+/* ECC fault address register 0 */
+#define ECC_FAR0_PADDR 0x0000000f      /* PA[32-35] */
+#define ECC_FAR0_TYPE  0x000000f0      /* Transaction type */
+#define ECC_FAR0_SIZE  0x00000700      /* Transaction size */
+#define ECC_FAR0_CACHE 0x00000800      /* Mapped cacheable */
+#define ECC_FAR0_LOCK  0x00001000      /* Error occurred in attomic cycle */
+#define ECC_FAR0_BMODE 0x00002000      /* Boot mode */
+#define ECC_FAR0_VADDR 0x003fc000      /* VA[12-19] (superset bits) */
+#define ECC_FAR0_S     0x08000000      /* Supervisor mode */
+#define ECC_FARO_MID   0xf0000000      /* Module ID */
+
+/* ECC diagnostic register */
+#define ECC_DIAG_CBX   0x00000001
+#define ECC_DIAG_CB0   0x00000002
+#define ECC_DIAG_CB1   0x00000004
+#define ECC_DIAG_CB2   0x00000008
+#define ECC_DIAG_CB4   0x00000010
+#define ECC_DIAG_CB8   0x00000020
+#define ECC_DIAG_CB16  0x00000040
+#define ECC_DIAG_CB32  0x00000080
+#define ECC_DIAG_DMODE 0x00000c00
+
+#define ECC_NREGS      8
+#define ECC_SIZE       (ECC_NREGS * sizeof(uint32_t))
+#define ECC_ADDR_MASK  (ECC_SIZE - 1)
+
+typedef struct ECCState {
+    uint32_t regs[ECC_NREGS];
+} ECCState;
+
+static void ecc_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    printf("ECC: Unsupported write 0x" TARGET_FMT_plx " %02x\n",
+           addr, val & 0xff);
+}
+
+static uint32_t ecc_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+    printf("ECC: Unsupported read 0x" TARGET_FMT_plx " 00\n", addr);
+    return 0;
+}
+
+static void ecc_mem_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    printf("ECC: Unsupported write 0x" TARGET_FMT_plx " %04x\n",
+           addr, val & 0xffff);
+}
+
+static uint32_t ecc_mem_readw(void *opaque, target_phys_addr_t addr)
+{
+    printf("ECC: Unsupported read 0x" TARGET_FMT_plx " 0000\n", addr);
+    return 0;
+}
+
+static void ecc_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    ECCState *s = opaque;
+
+    switch (addr & ECC_ADDR_MASK) {
+    case ECC_FCR_REG:
+        s->regs[0] = (s->regs[0] & (ECC_FCR_VER | ECC_FCR_IMPL)) |
+                     (val & ~(ECC_FCR_VER | ECC_FCR_IMPL));
+        DPRINTF("Write fault control %08x\n", val);
+        break;
+    case 4:
+        s->regs[1] =  val;
+        DPRINTF("Write reg[1] %08x\n", val);
+        break;
+    case ECC_FSR_REG:
+        s->regs[2] =  val;
+        DPRINTF("Write fault status %08x\n", val);
+        break;
+    case 12:
+        s->regs[3] =  val;
+        DPRINTF("Write reg[3] %08x\n", val);
+        break;
+    case ECC_FAR0_REG:
+        s->regs[4] =  val;
+        DPRINTF("Write fault address 0 %08x\n", val);
+        break;
+    case ECC_FAR1_REG:
+        s->regs[5] =  val;
+        DPRINTF("Write fault address 1 %08x\n", val);
+        break;
+    case ECC_DIAG_REG:
+        s->regs[6] =  val;
+        DPRINTF("Write diag %08x\n", val);
+        break;
+    case 28:
+        s->regs[7] =  val;
+        DPRINTF("Write reg[7] %08x\n", val);
+        break;
+    }
+}
+
+static uint32_t ecc_mem_readl(void *opaque, target_phys_addr_t addr)
+{
+    ECCState *s = opaque;
+    uint32_t ret = 0;
+
+    switch (addr & ECC_ADDR_MASK) {
+    case ECC_FCR_REG:
+        ret = s->regs[0];
+        DPRINTF("Read enable %08x\n", ret);
+        break;
+    case 4:
+        ret = s->regs[1];
+        DPRINTF("Read register[1] %08x\n", ret);
+        break;
+    case ECC_FSR_REG:
+        ret = s->regs[2];
+        DPRINTF("Read fault status %08x\n", ret);
+        break;
+    case 12:
+        ret = s->regs[3];
+        DPRINTF("Read reg[3] %08x\n", ret);
+        break;
+    case ECC_FAR0_REG:
+        ret = s->regs[4];
+        DPRINTF("Read fault address 0 %08x\n", ret);
+        break;
+    case ECC_FAR1_REG:
+        ret = s->regs[5];
+        DPRINTF("Read fault address 1 %08x\n", ret);
+        break;
+    case ECC_DIAG_REG:
+        ret = s->regs[6];
+        DPRINTF("Read diag %08x\n", ret);
+        break;
+    case 28:
+        ret = s->regs[7];
+        DPRINTF("Read reg[7] %08x\n", ret);
+        break;
+    }
+    return ret;
+}
+
+static CPUReadMemoryFunc *ecc_mem_read[3] = {
+    ecc_mem_readb,
+    ecc_mem_readw,
+    ecc_mem_readl,
+};
+
+static CPUWriteMemoryFunc *ecc_mem_write[3] = {
+    ecc_mem_writeb,
+    ecc_mem_writew,
+    ecc_mem_writel,
+};
+
+static int ecc_load(QEMUFile *f, void *opaque, int version_id)
+{
+    ECCState *s = opaque;
+    int i;
+
+    if (version_id != 1)
+        return -EINVAL;
+
+    for (i = 0; i < ECC_NREGS; i++)
+        qemu_get_be32s(f, &s->regs[i]);
+
+    return 0;
+}
+
+static void ecc_save(QEMUFile *f, void *opaque)
+{
+    ECCState *s = opaque;
+    int i;
+
+    for (i = 0; i < ECC_NREGS; i++)
+        qemu_put_be32s(f, &s->regs[i]);
+}
+
+static void ecc_reset(void *opaque)
+{
+    ECCState *s = opaque;
+    int i;
+
+    s->regs[ECC_FCR_REG] &= (ECC_FCR_VER | ECC_FCR_IMPL);
+
+    for (i = 1; i < ECC_NREGS; i++)
+        s->regs[i] = 0;
+}
+
+void * ecc_init(target_phys_addr_t base, uint32_t version)
+{
+    int ecc_io_memory;
+    ECCState *s;
+
+    s = qemu_mallocz(sizeof(ECCState));
+    if (!s)
+        return NULL;
+
+    s->regs[0] = version;
+
+    ecc_io_memory = cpu_register_io_memory(0, ecc_mem_read, ecc_mem_write, s);
+    cpu_register_physical_memory(base, ECC_SIZE, ecc_io_memory);
+    register_savevm("ECC", base, 1, ecc_save, ecc_load, s);
+    qemu_register_reset(ecc_reset, s);
+    ecc_reset(s);
+    return s;
+}