diff options
author | Mychaela Falconia <mychaela.falconia@gmail.com> | 2019-02-12 16:21:14 +0700 |
---|---|---|
committer | Vadim Yanitskiy <axilirator@gmail.com> | 2019-02-19 15:18:47 +0700 |
commit | edabc799edcc893fcdef707ee861de9807dc78e7 (patch) | |
tree | cf2b293ad7490dc7e7f4b8a3cde395b2a1a36d10 /src/target/firmware/board | |
parent | 28aa9675192e4bca959fa0f29da7fc2908d22edc (diff) |
firmware/board: introduce new FCDEV3B (FreeCalypso) target
FCDEV3B (stands for "FreeCalypso development board, triband") is a
GSM mobile station development board by FreeCalypso project. The
board features the same legendary TI Calypso GSM MS chipset that
was used in commercial GSM/GPRS modems such as Openmoko's, and
functions as a standalone (or "bare") GSM modem.
For more information, please see the project's web side:
https://www.freecalypso.org/fcdev3b.html.
Change-Id: I09bd35a18d3ea094000050169a62fd82ba6eccfe
Related: OS#3581
Diffstat (limited to 'src/target/firmware/board')
-rw-r--r-- | src/target/firmware/board/fcdev3b/init.c | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/src/target/firmware/board/fcdev3b/init.c b/src/target/firmware/board/fcdev3b/init.c new file mode 100644 index 00000000..92be6674 --- /dev/null +++ b/src/target/firmware/board/fcdev3b/init.c @@ -0,0 +1,141 @@ +/* Initialization for the FreeCalypso FCDEV3B modem */ + +/* Based on board/gta0x/init.c with the following obnoxious legalese: + * + * (C) 2010 by Harald Welte <laforge@gnumonks.org> + * + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <stdint.h> +#include <stdio.h> + +#include <debug.h> +#include <ctors.h> +#include <memory.h> +#include <board.h> +#include <keypad.h> +#include <console.h> +#include <flash/cfi_flash.h> + +#include <calypso/irq.h> +#include <calypso/clock.h> +#include <calypso/dma.h> +#include <calypso/rtc.h> +#include <calypso/timer.h> +#include <uart.h> + +#include <comm/sercomm.h> +#include <comm/timer.h> + +#include <abb/twl3025.h> +#include <rf/trf6151.h> + +#define ARMIO_LATCH_OUT 0xfffe4802 +#define IO_CNTL_REG 0xfffe4804 +#define ARM_CONF_REG 0xfffef006 +#define ASIC_CONF_REG 0xfffef008 +#define IO_CONF_REG 0xfffef00a + +static void board_io_init(void) +{ + uint16_t reg; + + reg = readw(ASIC_CONF_REG); + /* TWL3025: Set SPI+RIF RX clock to rising edge */ + reg |= (1 << 13) | (1 << 14); + writew(reg, ASIC_CONF_REG); + + /* + * Most Calypso peripheral interface signals are unconnected + * on this modem. We configure them to be GPIOs in IO_CONF_REG, + * then configure them to be outputs in IO_CNTL_REG, then set + * the outputs to 0 in ARMIO_LATCH_OUT. + * + * Differences from Openmoko GTA0x: + * + * GPIO1 output needs to be 1 to enable the loudspeaker amplifier + * GPIO3 needs to be configured as an input + * I/O 9-12 are MCSI rather than GPIOs + */ + writew(0x0215, IO_CONF_REG); + writew(0xDC08, IO_CNTL_REG); + writew(0x0002, ARMIO_LATCH_OUT); + + /* configure ADD(22), needed for second half of flash */ + reg = readw(ARM_CONF_REG); + reg |= (1 << 3); + writew(reg, ARM_CONF_REG); +} + +void board_init(int with_irq) +{ + /* Configure the memory interface */ + /* Using the same settings as the official FreeCalypso fw */ + calypso_mem_cfg(CALYPSO_nCS0, 4, CALYPSO_MEM_16bit, 1); + calypso_mem_cfg(CALYPSO_nCS1, 4, CALYPSO_MEM_16bit, 1); + calypso_mem_cfg(CALYPSO_nCS2, 4, CALYPSO_MEM_16bit, 1); + calypso_mem_cfg(CALYPSO_nCS3, 4, CALYPSO_MEM_16bit, 1); + calypso_mem_cfg(CALYPSO_CS4, 4, CALYPSO_MEM_16bit, 1); + calypso_mem_cfg(CALYPSO_nCS6, 0, CALYPSO_MEM_32bit, 1); + calypso_mem_cfg(CALYPSO_nCS7, 0, CALYPSO_MEM_32bit, 0); + + /* Set VTCXO_DIV2 = 1, configure PLL for 104 MHz and give ARM half of that */ + calypso_clock_set(2, CALYPSO_PLL13_104_MHZ, ARM_MCLK_DIV_2); + + /* Configure the RHEA bridge with some sane default values */ + calypso_rhea_cfg(0, 0, 0xff, 0, 1, 0, 0); + + /* Initialize board-specific GPIO */ + board_io_init(); + + /* Enable bootrom mapping to route exception vectors to RAM */ + calypso_bootrom(with_irq); + calypso_exceptions_install(); + + /* Initialize interrupt controller */ + if (with_irq) + irq_init(); + + sercomm_bind_uart(UART_MODEM); + cons_bind_uart(UART_IRDA); + + /* initialize MODEM UART to be used for sercomm */ + uart_init(UART_MODEM, with_irq); + uart_baudrate(UART_MODEM, UART_115200); + + /* Initialize IRDA UART to be used for old-school console code. + * note: IRDA uart only accessible on C115 and C117 PCB */ + uart_init(UART_IRDA, with_irq); + uart_baudrate(UART_IRDA, UART_115200); + + /* Initialize hardware timers */ + hwtimer_init(); + + /* Initialize DMA controller */ + dma_init(); + + /* Initialize real time clock */ + rtc_init(); + + /* Initialize system timers (uses hwtimer 2) */ + timer_init(); + + /* Initialize ABB driver (uses SPI) */ + twl3025_init(); +} |