aboutsummaryrefslogtreecommitdiffstats
path: root/debian
AgeCommit message (Collapse)AuthorFilesLines
2018-09-12Install sample cfg file to /etc/osmocomPau Espin Pedrol2-0/+2
Change-Id: Ib871a3cd14386ef6e6b512a3d66e7e7a839295a5
2018-09-12Install systemd services with autotoolsPau Espin Pedrol8-6/+6
Change-Id: Ia1a4fb62dee35737ece1f3501f352501eba2449e
2018-08-09debian: add patches for debian8Alexander Couzens2-0/+58
The osmocom-nightly/release can create debian8 package by patching rules and control files Change-Id: I261302d2ed16e76540073589504e7426e23d00a1
2018-06-25debian: Explicitly enable osmo-trx-uhd buildPau Espin Pedrol1-1/+1
osmotrxuhd is already being built since it's enabled by default, but let's make it more explicit that we are building it too. Change-Id: Ie9c224485cce047cd3ee4600ff7fbdb082355cdc
2018-06-25debian: Enable build of osmo-trx-lmsPau Espin Pedrol1-1/+1
Change-Id: I4711e97c844e582601a588fdc359fc020bcee001
2018-06-25Use correct paths when installing example filesPau Espin Pedrol2-4/+4
Fixes: c7756e73b73f9e7c64a1391f13e65f4f9d227bf4 Change-Id: If55d14768727c7119d86da60413861674dd3538b
2018-06-19debian: Add cfg file examples for osmo-trx-{lms,uhd}Pau Espin Pedrol2-0/+4
Sort cfg files according to their osmo-trx binary. Install them during make install. Add the installed cfg files to related debian packages. Change-Id: I905cdac30b441e4df0a3f5c0924d1637b9f67b90
2018-06-19contrib: Add systemd services for all backendsPau Espin Pedrol3-0/+3
Change-Id: I38a7ff7b9dafc3d6aa0426777036e3d7666045a7
2018-06-19debian: Add package osmo-trx-lmsPau Espin Pedrol2-1/+22
Change-Id: I3213c66907fbf0c7e531835b4993fa1bdc89edc3
2018-05-03Bump version: 0.3.0-dirty → 0.4.00.4.0Pau Espin Pedrol1-0/+122
Change-Id: Ifc469bce89d52012e1f876c847b4535360a602ad
2018-04-28debian/control: Add build dependency to libusrp-devHarald Welte1-0/+1
Change-Id: I9593c9e45d304b7ffc94474e94450da418838513
2018-04-28debian: Ensure USRP1 firmware is part of osmo-trx-usrp1Harald Welte1-0/+2
The std_inband.rbf files are required to operate USRP1 with timestamps Change-Id: I9b3e937ea1941953dcdcaf57cfec9575cd5a8a9c
2018-04-28debian/rules: Make sure we always require libusrpHarald Welte1-0/+3
Change-Id: Id9c9188a24617f83efa0e1fcf54f9e0dd223e365
2018-04-28debian/control: Remove "Maintainer" from binary package sectionHarald Welte1-1/+0
This resolves the following warning: dpkg-source: warning: unknown information field 'Maintainer' in input data in package's section of control info file Change-Id: I7a8d8c54eabccc5cedf7ad0a2bccf91f32f1bfdf
2018-04-28Revert "debian: Remove osmo-trx-usrp1 until we can build libusrp1.deb"Harald Welte1-0/+1
This reverts commit 295b938d51889d6db39251130642d45262ca039a, as we now have libusrp built in OBS Change-Id: Ia1311f1e236e6aea4acc08d3f234d53e46789cf9
2018-04-28debian: Fix OBS buildPau Espin Pedrol1-17/+9
osmo-trx is a metapackage, no need for .install file. Debug files are always put into osmo-trx-dbg, no osmo-trx-*-dbg. Change-Id: I160dd83b265dcda52762a9f9c7eac9337928da35
2018-04-28debian: Remove osmo-trx-usrp1 until we can build libusrp1.debPau Espin Pedrol1-1/+0
Change-Id: I43163755a29014fe1f098e994f8df79d853c90f8
2018-04-24Build one osmo-trx binary for each device support enabledPau Espin Pedrol4-5/+39
Same way as we do in osmo-bts. After this commit, osmo-trx no longer exists. Instead, osmo-trx-uhd and osmo-trx-usrp1 are generated based on configure flags enabled. A new flag --with(out)-uhd has been added to enable/disable build of osmo-trx with UHD backend. It is left enabled by default to keep compatibility with older build scripts. Binary with USRP1 backend must still be manually enabled with --with-usrp1 flag. Change-Id: Iea8c0d7434762713a53440d29bf3ebd84accb262
2018-02-26debian: Depend on libtalloc and libosmocorePau Espin Pedrol1-1/+3
Change-Id: If4bf03d164e9d19a8a21399a2c74b2984c48cc70
2018-01-09Remove Configuration module and libsqlite dependencyPau Espin Pedrol2-15/+0
Change-Id: I823aea91367d586507bbf352f1b6f25bdd635baa
2017-10-28Tag/Release 0.2.00.2.0Harald Welte1-0/+167
This is the first real tagged Osmocom release of OsmoTRX. [ Alexander Chemeris ] * EDGE: Add support for UmTRX. * Common: Get rid of a compilation warning. * Common: Make sure gLogEarly() log to the same facilities as the normal log. * transceiver: Properly handle MAXDLY. * transceiver: Add an option to generate random Access Bursts. * osmo-trx: Output Rx SPS as a part of configuration output. * transceiver: Do not pass transceiver state struct to function where it's not used. * makefile: Fix build from an external path. * radioDevice: GSMRATE macro must have parentheses around its definition. * uhd: Fix comment. * radioInterface: Initialize power scale with a meaningful default. * transceiver: Log channel number in DEBUG output of demoded bursts. * transceiver: Add an option to emulate a RACH delay in random filler mode. * UHD: Initial LimeSDR support. * CommonLibs: Remove unused files. * sigProcLib: Typo sybols -> symbols * radioBuffer: Remove extra ; at the end of inline function definitions. * sigProcLib: Fix documentation, sync argument names in .cpp and .h files. * sigProcLib: make energyDetect() simpler by returning actual energy. * sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity. * sigProcLib: Slice SoftVector instead of signalVector for GMSK demod. * Call vectorSlicer() right before packing bits for transmission to osmo-bts. * CommonLibs: Print soft bits with less confidence to console when printing a soft vector. * BitVector: Remove convolutional codec - we don't use it in osmo-trx. * BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits. * signalVector: Implement segment(). * vector: Introduce segmentMove() method to move data inside of a vector. * vector: Introduce shrink() function to shrink vector size without loosing data. * Move CorrType type from Transceiver to sigProcLib. * sigProcLib: rename signalError type to SignalError. * Move Transceiver::detectBurst() to sigProcLib to make it reusable. * Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable. * sigProcLib: Add operator<< to print CorrType to a string. * sigProcLib.h: Fix whitespaces. No non-whitespace changes. * Move Transceiver::demodulate() to sigProcLib to make it reusable. * sigProcLib: constify signalVector arguments for detectBurst() functions. * sigProcLib: Constify demodulation functions burst argument. * sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits. * Configuration: Variables allocated with 'new' must be freed with 'delete'. * BitVector: Remove Generator class. * PRBS: a Pseudo-random binary sequence (PRBS) generator class. [ Tom Tsou ] * EDGE: Fix USRP B210 device support * uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts * EDGE: Fix demodulation slicer input * common: Restrict UDP binding to localhost only * common: Add mandatory length field to UDP receive calls * uhd: Update default E3XX settings * uhd: Set default Tx sampling to 4 sps * uhd: Make device offset check a private method * uhd: Set minimum UHD version requirement for E3XX * sigproc: Expand RACH, TSC, and EDGE correlation windows * transceiver: Do not report error on SETTSC when radio is on * transceiver: Add Rx samples-per-symbol option * radioInterface: Convert diversity argument to general type * iface: Add inner ring-buffer implementation * mcbts: Add multi-ARFCN channelizing filters * mcbts: Add multi-ARFCN radio support * sigproc: Adjust burst detection threshold criteria * egprs: Enable 8-PSK length vectors on the Tx interface * egprs: Enable 8-PSK burst detection when EDGE is enabled * transceiver: Remove HANDOVER warnings * mcbts: Allow out of order channel setup * radioInterface: Fix multi-channel buffer index bug * uhd: Add command line option for GPS reference * transceiver: Fix mixed GSMK / 8-PSK transmission * transceiver: Fix 4 SPS receive TOA value * sigproc: Fix missing 8-PSK tail symbols * uhd: Update USRP2/N200/N210 for 4 SPS Rx * sigproc: Match differential GMSK start/end bits to tail bits * uhd: Add missing B200 sample timing for 4 SPS receive * transceiver: Fix command build warning * uhd: Set minimum supported version to 3.9.0 * uhd: Add X300 sample timing for 4 SPS * Revert "uhd: Set minimum supported version to 3.9.0" * uhd: Add support for UHD-3.11 logging control * uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz * Resampler: Fix initialization return checking * sigProcLib: Remove unreachable code and no-effect checks * sigProcLib: Check return status on downsampling * sigProcLib: Fix negative value check on unsigned value * Resampler: Fix non-array delete for filter taps * Transceiver: Remove unsigned negative compares * Configuration: Fix const and signedness compile warnings * config: Remove OpenBTS style sqlite configuration * radioInterface: Remove UmTRX 'diversity' option * build: Require and check for gcc C++11 support * uhd: Use map container for for device parameter access * sigProcLib: Remove unused functions from public interface * uhd: Add non-UmTRX channel swap support * uhd: Fix Tx-RX timing offset setting * uhd: Fix USRP2/N200/N210 device detection * transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices * sigProcLib: Fix complex/real vector flag in Laurent modulator * sigProcLib: Remove heap based signal vector allocations * common: Declare explicit Vector move constructor * sigProcLib: Remove trigonometric tables * sigProcLib: Use explicit NaN check in sinc table generation * sigProcLib: Replace dynamically allocated resampling buffers * sigProcLib: Specify standard namespace for isnan() * uhd: Always specify samples-per-symbol for device lookup * LimeSDR: set approximate tx offset value to make GSM work [ Neels Hofmeyr ] * add basic .gitignore * configure.ac: check for boost/config.hpp header * The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it. * add contrib/jenkins.sh, for gerrit build bot [ pierre.baudry ] * transceiver: Fix mismatched allocations and deallocations [ Holger Hans Peter Freyther ] * debian: Require fftw3 header files for osmo-trx [ Max ] * Add gerrit settings * Integrate Debian packaging changes * Remove embedded sqlite3 * Fix building against sqlite3 * Add autoconf-archive to dependencies * debian: remove obsolete dependency * deb: remove unused dependency * Remove redundant explicit dependency * Use release helper from libosmocore [ Ruben Undheim ] * Do not embed sqlite3 when building [ Philipp Maier ] * buildenv: Turn off native architecture builds * cosmetic: Make parameter lists uniform * Add test program to verify convolution implementation * ssedetect: Add runtime CPU detection * cosmetic: remove code duplication * buildenv: Make build CPU invariant * buildenv: Split up SSE3 and SSE4.1 code * cosmetic: Add info about SSE support [ Vadim Yanitskiy ] * buildenv: correct the ax_sse macro description * buildenv: actually strip unused cpuid functionality * buildenv: fix build on systems without SIMD support * buildenv: cosmetic changes * buildenv: check for __builtin_cpu_supports call support * ssedetect: call __builtin_cpu_supports() only if supported [ Pau Espin Pedrol ] * cosmetic: transciever: Remove trailing whitespaces * transceiver: Avoid sending clock indications when trx is not powered on * Add -j option to bind to specific address [ ignasj ] * LimeSDR: Change device detection to work with USB and PCIe versions * LimeSDR: change tx window type to TX_WINDOW_FIXED * LimeSDR: Fix sample value range [ Harald Welte ] * Add '-t' command line option to enable SCHED_RR * Import git-version-gen and update AC_INIT() Change-Id: Ibf3be6cc25e9b20d625b1f67972114b7f613f05c
2017-07-20Remove redundant explicit dependencyMax1-1/+1
There's no need to explicitly mention library package because ${shlibs:Depends} will take care of it automatically. Change-Id: Ibd9cfc3673d828122edb85ba9de7ceb77f0299d0
2017-07-06deb: remove unused dependencyMax1-2/+1
The libdbd dependency is not used because libsqlite3 is used directly - adjust debian/control to match. Change-Id: Id2ab1facad703fa0c1d45084e70d41e73dbad6e7 Related: OS#1929
2017-05-19debian: remove obsolete dependencyMax1-1/+0
This should fix package build for Ubuntu 17.04: obsolete package hardening-wrapper was removed which cause .deb build failure. The dependency on it is incorrect to begin with because we use DEB_BUILD_MAINT_OPTIONS instead. Change-Id: I3ea72b4123a280a846086d083c4f3189d611f8cf
2017-03-14Add autoconf-archive to dependenciesMax1-0/+1
We use AX_EXT in ./configure for checking CPU features anyway, so it's better to add it as explicit dependency. Related: OS#1923 Change-Id: I7ba48e1df4ede8b477574da3faa15fd02e15c69b
2017-01-26Fix building against sqlite3Max1-0/+1
* Explicitly check for sqlite3 at configure stage, remove old include dir, fix header inclusion. * Use configure results for linking instead of hardcoded linker option for sqlite. * Add dependency on -dev package for .deb Change-Id: I6d7f697d67651f02ceb77fc4da4317b64fa47f9e Fixes: OS#1928
2017-01-24Remove embedded sqlite3Max1-2/+1
Previous patch switches to using system-wide sqlite3 so it's safe to remove local copy now. Change-Id: Ie8e751cc62132fe1f7748ccd78c5d48469027329
2017-01-24Integrate Debian packaging changesMax3-24/+182
debian/control: * restructure to make it easier to incorporate further changes * update package descriptions * update project URL debian/rules: * use proper hardening syntax debian/copyright: update to match Debian format Change-Id: I9a89e7311c8632ae26ac2e6c02d1e427d94b1608 Related: OS#1694
2017-01-24debian: Require fftw3 header files for osmo-trxHolger Hans Peter Freyther1-1/+1
Install missing development package to get osmo-trx to build. Change-Id: Id80937724d5e4da4ed555cbabfcd3e2457cb2a19
2016-03-18debian: Add packaging to master taken from fairwaves/masterHolger Hans Peter Freyther7-0/+75
There doesn't seem to be a reason why this shouldn't be in master. The fairwaves/master branch is removing --march=native as well that looks like a good idea as well.
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 13:00:47 +0000