aboutsummaryrefslogtreecommitdiffstats
path: root/Transceiver52M/USRPDevice.cpp
AgeCommit message (Collapse)AuthorFilesLines
2012-10-22Transceiver52M: UHD: Setup option to pass arguments from command linettsou1-1/+1
UHD accepts optional 'args' that can be used for device descriptions such as IP address, device type, etc. Allow these to be passed in on the transceiver command line as the third argument (number of supported carriers is the second argument). This option benefits those who may have multiple UHD devices attached to a single system. This option is not yet supported by GSM core and requires starting the transceiver independently on the command line. This option has no effect when USRP1 is used. Signed-off-by: Thomas Tsou <tom@tsou.cc> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@4315 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2012-03-13transceiver, usrp1: fix transmit gain setting bugttsou1-1/+1
Transmit gain setting would deceptively set the receive gain instead. Since transmit attenuation is a combination of RF gain and digital scaling, this major copy/paste bug may have gone unnoticed by many users. Reported-by: Robin Coxe <coxe@close-haul.com> Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@3309 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-28transceiver52M: bump critial errors to ALERT levelkurtis.heimerl1-2/+2
Device errors regarding properties such as sample rate or frequency tuning are almost always fatal and lead to the common error "assuming TRX is dead". Make sure that these errors are clearly presented to the user. Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2700 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26transceiver: usrp1: select single dboard use at compile timekurtis.heimerl1-0/+8
The following option selects single daughterboard use on side A only. Otherwise, the default setting is TX on A and Rx on B. ./configure --with-singledb Other options are possible, as per the following enum, but for simplicity with configure options, there are only two choices. enum dboardConfigType { TXA_RXB, TXB_RXA, TXA_RXA, TXB_RXB }; Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2687 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26transceiver: update to log messages to work with P2.8kurtis.heimerl1-4/+4
Log level changes in P2.8: ERROR -> ERR WARN -> WARNING DEEPDEBUG -> DEBUG Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2683 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26usrp1: fix transmit side tuning bugkurtis.heimerl1-11/+4
Transmit tuning was primarily setup for side A only. Some boards - WBX - would still tune with improper channel arguments, though receiver performance was disrupted. Previous testing was primarily with single board on side A only or dual configuration with side A transmit, so this bug largely went undetected. Patch tested with RFX and WBX daughterboards in single and dual configurations sides A and B. Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2658 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26usrp1: fix typo in rx gain setting log messagekurtis.heimerl1-1/+1
Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2657 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26uhd: add 52 MHz transceiver supportkurtis.heimerl1-5/+9
These are mostly identical changes as added to the non-52MHz implementation with the exception of sample rate. Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2634 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-26Transceiver52M: add WBX, DBSRX, and single board supportkurtis.heimerl1-192/+118
Remove all RFX specific parts and control daughterboard functionality using the base API. The tuning is now set to a non-inverted image so remove the I/Q swap as well. Daughterboard configuration is set through an enum variable. Currently, there is no auto-configuration and the default is Tx/RX on sides A/B respectively. For transceiver boards the receive antenna is set to RX2. enum dboardConfigType { TXA_RXB, TXB_RXA, TXA_RXA, TXB_RXB }; const dboardConfigType dboardConfig = TXA_RXB; Signed-off-by: Thomas Tsou <ttsou@vt.edu> git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2632 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-11-02Reverting r2342kurtis.heimerl1-40/+24
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2424 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-14Updates to working with a single RFX...builds but not working yet.hsamra1-24/+40
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2342 19bc5d8c-e614-43d4-8b26-e1612bc8e597
2011-10-12Adding in the missing Transceiver52M directorydburgess1-0/+631
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2307 19bc5d8c-e614-43d4-8b26-e1612bc8e597
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-30 04:15:47 +0000