1 files changed, 115 insertions, 0 deletions
diff --git a/Transceiver52M/radioDevice.h b/Transceiver52M/radioDevice.h
new file mode 100644
index 0000000..9ca39da
--- /dev/null
+++ b/Transceiver52M/radioDevice.h
@@ -0,0 +1,115 @@
+/*
+* Copyright 2008 Free Software Foundation, Inc.
+*
+* This software is distributed under multiple licenses; see the COPYING file in the main directory for licensing information for this specific distribuion.
+*
+* This use of this software may be subject to additional restrictions.
+* See the LEGAL file in the main directory for details.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+*/
+
+#ifndef __RADIO_DEVICE_H__
+#define __RADIO_DEVICE_H__
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/** a 64-bit virtual timestamp for radio data */
+typedef unsigned long long TIMESTAMP;
+
+/** A class to handle a USRP rev 4, with a two RFX900 daughterboards */
+class RadioDevice {
+
+  public:
+
+  /** Start the USRP */
+  virtual bool start()=0;
+
+  /** Stop the USRP */
+  virtual bool stop()=0;
+
+  /**
+	Read samples from the radio.
+	@param buf preallocated buf to contain read result
+	@param len number of samples desired
+	@param overrun Set if read buffer has been overrun, e.g. data not being read fast enough
+	@param timestamp The timestamp of the first samples to be read
+	@param underrun Set if radio does not have data to transmit, e.g. data not being sent fast enough
+	@param RSSI The received signal strength of the read result
+	@return The number of samples actually read
+  */
+  virtual int readSamples(short *buf, int len, bool *overrun, 
+		   TIMESTAMP timestamp,
+		   bool *underrun,
+		   unsigned *RSSI=NULL)=0;
+  /**
+        Write samples to the radio.
+        @param buf Contains the data to be written.
+        @param len number of samples to write.
+        @param underrun Set if radio does not have data to transmit, e.g. data not being sent fast enough
+        @param timestamp The timestamp of the first sample of the data buffer.
+        @param isControl Set if data is a control packet, e.g. a ping command
+        @return The number of samples actually written
+  */
+  virtual int writeSamples(short *buf, int len, bool *underrun, 
+		    TIMESTAMP timestamp,
+		    bool isControl=false)=0;
+ 
+  /** Update the alignment between the read and write timestamps */
+  virtual bool updateAlignment(TIMESTAMP timestamp)=0;
+  
+  /** Set the transmitter frequency */
+  virtual bool setTxFreq(double wFreq)=0;
+
+  /** Set the receiver frequency */
+  virtual bool setRxFreq(double wFreq)=0;
+
+  /** Returns the starting write Timestamp*/
+  virtual TIMESTAMP initialWriteTimestamp(void)=0;
+
+  /** Returns the starting read Timestamp*/
+  virtual TIMESTAMP initialReadTimestamp(void)=0;
+
+  /** returns the full-scale transmit amplitude **/
+  virtual double fullScaleInputValue()=0;
+
+  /** returns the full-scale receive amplitude **/
+  virtual double fullScaleOutputValue()=0;
+
+  /** sets the receive chan gain, returns the gain setting **/
+  virtual double setRxGain(double dB)=0;
+
+  /** gets the current receive gain **/
+  virtual double getRxGain(void)=0;
+
+  /** return maximum Rx Gain **/
+  virtual double maxRxGain(void) = 0;
+
+  /** return minimum Rx Gain **/
+  virtual double minRxGain(void) = 0;
+
+  /** sets the transmit chan gain, returns the gain setting **/
+  virtual double setTxGain(double dB)=0;
+
+  /** return maximum Tx Gain **/
+  virtual double maxTxGain(void) = 0;
+
+  /** return minimum Tx Gain **/
+  virtual double minTxGain(void) = 0;
+
+  /** Return internal status values */
+  virtual double getTxFreq()=0;
+  virtual double getRxFreq()=0;
+  virtual double getSampleRate()=0;
+  virtual double numberRead()=0;
+  virtual double numberWritten()=0;
+
+};
+
+#endif