diff options
author | kurtis.heimerl <kurtis.heimerl@19bc5d8c-e614-43d4-8b26-e1612bc8e597> | 2011-11-28 06:26:08 +0000 |
---|---|---|
committer | kurtis.heimerl <kurtis.heimerl@19bc5d8c-e614-43d4-8b26-e1612bc8e597> | 2011-11-28 06:26:08 +0000 |
commit | e33203208beb300fa9d0ff2783f5d5836b9c9418 (patch) | |
tree | 44b1b69e18da85741f0e214c8303d62dfac7d0bf /Transceiver52M/UHDDevice.cpp | |
parent | 4403d4ff7cb453451e792be388b15f7081545d67 (diff) |
transceiver52M: bump critial errors to ALERT level
Device errors regarding properties such as sample
rate or frequency tuning are almost always fatal and
lead to the common error "assuming TRX is dead".
Make sure that these errors are clearly presented to
the user.
Signed-off-by: Thomas Tsou <ttsou@vt.edu>
git-svn-id: http://wush.net/svn/range/software/public/openbts/trunk@2700 19bc5d8c-e614-43d4-8b26-e1612bc8e597
Diffstat (limited to 'Transceiver52M/UHDDevice.cpp')
-rw-r--r-- | Transceiver52M/UHDDevice.cpp | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/Transceiver52M/UHDDevice.cpp b/Transceiver52M/UHDDevice.cpp index 89f1231..3bcf2de 100644 --- a/Transceiver52M/UHDDevice.cpp +++ b/Transceiver52M/UHDDevice.cpp @@ -341,7 +341,8 @@ double uhd_device::set_rates(double rate) actual_clk_rt = usrp_dev->get_master_clock_rate(); if (actual_clk_rt != master_clk_rt) { - LOG(ERR) << "Failed to set master clock rate"; + LOG(ALERT) << "Failed to set master clock rate"; + LOG(ALERT) << "Actual clock rate " << actual_clk_rt; return -1.0; } #endif @@ -352,11 +353,11 @@ double uhd_device::set_rates(double rate) actual_rt = usrp_dev->get_tx_rate(); if (actual_rt != rate) { - LOG(ERR) << "Actual sample rate differs from desired rate"; + LOG(ALERT) << "Actual sample rate differs from desired rate"; return -1.0; } if (usrp_dev->get_rx_rate() != actual_rt) { - LOG(ERR) << "Transmit and receive sample rates do not match"; + LOG(ALERT) << "Transmit and receive sample rates do not match"; return -1.0; } @@ -643,7 +644,7 @@ int uhd_device::readSamples(short *buf, int len, bool *overrun, rc = check_rx_md_err(metadata, num_smpls); switch (rc) { case ERROR_UNRECOVERABLE: - LOG(ERR) << "UHD: Unrecoverable error, exiting."; + LOG(ALERT) << "Unrecoverable error, exiting..."; exit(-1); case ERROR_TIMING: restart(prev_ts); |