From 8da77d2d522e94474e179fddc19f2a71747865bb Mon Sep 17 00:00:00 2001
From: Harald Welte <laforge@gnumonks.org>
Date: Sat, 8 Oct 2016 22:04:08 +0200
Subject: mv-uart: use Seeed Studio DRU

---
 multivoltage-uart/mv-uart.brd | 64 +++++++++++++++++++++++--------------------
 1 file changed, 34 insertions(+), 30 deletions(-)

diff --git a/multivoltage-uart/mv-uart.brd b/multivoltage-uart/mv-uart.brd
index e49d4ad..c6fc992 100644
--- a/multivoltage-uart/mv-uart.brd
+++ b/multivoltage-uart/mv-uart.brd
@@ -765,7 +765,7 @@ Copyright: Würth Elektronik</description>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="sysmocom-basista-4layer-prototype *">
+<designrules name="SeeedStudio_2layer_DRU_no_angle_20140221 *">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für 
@@ -773,31 +773,35 @@ die meisten Anwendungen passen. Sollte ihre Platine
 besondere Anforderungen haben, treffen Sie die erforderlichen
 Einstellungen hier und speichern die Design Rules unter 
 einem neuen Namen ab.</description>
-<description language="en">&lt;b&gt;sysmocom Design rules for Basista 4-layer prototype&lt;/b&gt;
+<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
-Please note that the minimum drill distance is &quot;two times diameter plus 10-20% between the
-center of the two drills&quot;.  This cannot be expressed in EAGLE DRU, but has been computed
-for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
+The default Design Rules have been set to cover
+a wide range of applications. Your particular design
+may have different requirements, so please make the
+necessary adjustments and save your customized
+design rules under a new name.</description>
+<description language="zh">&lt;b&gt;Seeed Studio EAGLE Design Rules&lt;/b&gt;
+</description>
 <param name="layerSetup" value="(1*16)"/>
-<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
-<param name="mtIsolate" value="1.55mm 0.55mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.46mm"/>
-<param name="mdWireWire" value="0.15mm"/>
-<param name="mdWirePad" value="0.15mm"/>
-<param name="mdWireVia" value="0.15mm"/>
-<param name="mdPadPad" value="0.15mm"/>
-<param name="mdPadVia" value="0.15mm"/>
-<param name="mdViaVia" value="0.15mm"/>
-<param name="mdSmdPad" value="0.15mm"/>
-<param name="mdSmdVia" value="0.15mm"/>
-<param name="mdSmdSmd" value="0.15mm"/>
+<param name="mtCopper" value="0.035mm 0.0175mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.0175mm 0.035mm"/>
+<param name="mtIsolate" value="1.5mm 1.1mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
+<param name="mdWireWire" value="6mil"/>
+<param name="mdWirePad" value="6mil"/>
+<param name="mdWireVia" value="6mil"/>
+<param name="mdPadPad" value="6mil"/>
+<param name="mdPadVia" value="6mil"/>
+<param name="mdViaVia" value="6mil"/>
+<param name="mdSmdPad" value="0mil"/>
+<param name="mdSmdVia" value="0mil"/>
+<param name="mdSmdSmd" value="0mil"/>
 <param name="mdViaViaSameLayer" value="8mil"/>
 <param name="mnLayersViaInSmd" value="2"/>
-<param name="mdCopperDimension" value="0.5mm"/>
-<param name="mdDrill" value="0.36mm"/>
+<param name="mdCopperDimension" value="10mil"/>
+<param name="mdDrill" value="10mil"/>
 <param name="mdSmdStop" value="0mil"/>
-<param name="msWidth" value="0.15mm"/>
+<param name="msWidth" value="6mil"/>
 <param name="msDrill" value="0.3mm"/>
-<param name="msMicroVia" value="9.99mm"/>
+<param name="msMicroVia" value="12mil"/>
 <param name="msBlindViaRatio" value="0.5"/>
 <param name="rvPadTop" value="0.25"/>
 <param name="rvPadInner" value="0.25"/>
@@ -806,15 +810,15 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
 <param name="rvViaInner" value="0.25"/>
 <param name="rvMicroViaOuter" value="0.25"/>
 <param name="rvMicroViaInner" value="0.25"/>
-<param name="rlMinPadTop" value="0.15mm"/>
+<param name="rlMinPadTop" value="10mil"/>
 <param name="rlMaxPadTop" value="20mil"/>
-<param name="rlMinPadInner" value="0.15mm"/>
+<param name="rlMinPadInner" value="10mil"/>
 <param name="rlMaxPadInner" value="20mil"/>
-<param name="rlMinPadBottom" value="0.15mm"/>
+<param name="rlMinPadBottom" value="10mil"/>
 <param name="rlMaxPadBottom" value="20mil"/>
-<param name="rlMinViaOuter" value="0.15mm"/>
+<param name="rlMinViaOuter" value="6mil"/>
 <param name="rlMaxViaOuter" value="20mil"/>
-<param name="rlMinViaInner" value="0.15mm"/>
+<param name="rlMinViaInner" value="6mil"/>
 <param name="rlMaxViaInner" value="20mil"/>
 <param name="rlMinMicroViaOuter" value="4mil"/>
 <param name="rlMaxMicroViaOuter" value="20mil"/>
@@ -822,16 +826,16 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
 <param name="rlMaxMicroViaInner" value="20mil"/>
 <param name="psTop" value="-1"/>
 <param name="psBottom" value="-1"/>
-<param name="psFirst" value="-1"/>
+<param name="psFirst" value="0"/>
 <param name="psElongationLong" value="100"/>
 <param name="psElongationOffset" value="100"/>
 <param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
-<param name="mlMinStopFrame" value="0.15mm"/>
-<param name="mlMaxStopFrame" value="0.15mm"/>
+<param name="mlMinStopFrame" value="2mil"/>
+<param name="mlMaxStopFrame" value="2mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
+<param name="mlViaStopLimit" value="100mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
@@ -842,7 +846,7 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
 <param name="checkGrid" value="0"/>
 <param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
+<param name="checkRestrict" value="0"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
-- 
cgit v1.2.3