diff options
Diffstat (limited to 'ohm4-ocxo/eagle/ohm4_ocxo.sch')
| -rw-r--r-- | ohm4-ocxo/eagle/ohm4_ocxo.sch | 211 |
1 files changed, 186 insertions, 25 deletions
diff --git a/ohm4-ocxo/eagle/ohm4_ocxo.sch b/ohm4-ocxo/eagle/ohm4_ocxo.sch index 37d4b5b..539ba77 100644 --- a/ohm4-ocxo/eagle/ohm4_ocxo.sch +++ b/ohm4-ocxo/eagle/ohm4_ocxo.sch @@ -8263,6 +8263,33 @@ We've spent an enormous amount of time creating and checking these footprints an <text x="-3.54" y="-1.3208" size="1.27" layer="27">>VALUE</text> <rectangle x1="-1.6002" y1="1.8034" x2="1.6002" y2="3.6576" layer="51"/> </package> +<package name="SOIC08"> +<wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/> +<wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/> +<wire x1="2.4" y1="-1.9" x2="-2.4" y2="-1.9" width="0.2032" layer="51"/> +<wire x1="-2.4" y1="-1.9" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/> +<wire x1="-2.4" y1="-1.4" x2="-2.4" y2="1.9" width="0.2032" layer="51"/> +<wire x1="-2.4" y1="1.9" x2="2.4" y2="1.9" width="0.2032" layer="51"/> +<wire x1="2.4" y1="-1.4" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/> +<smd name="2" x="-0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="7" x="-0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="1" x="-1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="3" x="0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="4" x="1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="8" x="-1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="6" x="0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/> +<smd name="5" x="1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/> +<text x="-2.667" y="-1.905" size="1.27" layer="25" rot="R90">>NAME</text> +<text x="3.937" y="-1.905" size="1.27" layer="27" rot="R90">>VALUE</text> +<rectangle x1="-2.15" y1="-3.1" x2="-1.66" y2="-2" layer="51"/> +<rectangle x1="-0.88" y1="-3.1" x2="-0.39" y2="-2" layer="51"/> +<rectangle x1="0.39" y1="-3.1" x2="0.88" y2="-2" layer="51"/> +<rectangle x1="1.66" y1="-3.1" x2="2.15" y2="-2" layer="51"/> +<rectangle x1="1.66" y1="2" x2="2.15" y2="3.1" layer="51"/> +<rectangle x1="0.39" y1="2" x2="0.88" y2="3.1" layer="51"/> +<rectangle x1="-0.88" y1="2" x2="-0.39" y2="3.1" layer="51"/> +<rectangle x1="-2.15" y1="2" x2="-1.66" y2="3.1" layer="51"/> +</package> </packages> <symbols> <symbol name="LDO"> @@ -8293,6 +8320,22 @@ We've spent an enormous amount of time creating and checking these footprints an <pin name="NR" x="12.7" y="-5.08" length="short" direction="pas" rot="R180"/> <pin name="GND1" x="2.54" y="-10.16" visible="pad" length="short" direction="pwr" rot="R90"/> </symbol> +<symbol name="IDT_ICS501"> +<pin name="VCC" x="-15.24" y="5.08" length="middle" direction="pwr"/> +<pin name="S0" x="-15.24" y="0" length="middle" direction="in"/> +<pin name="S1" x="-15.24" y="-2.54" length="middle" direction="in"/> +<pin name="GND" x="-15.24" y="-7.62" length="middle" direction="pas"/> +<pin name="X1_ICLK" x="15.24" y="5.08" length="middle" direction="in" rot="R180"/> +<pin name="X2" x="15.24" y="2.54" length="middle" direction="out" rot="R180"/> +<pin name="CLK" x="15.24" y="-2.54" length="middle" direction="out" rot="R180"/> +<pin name="OE" x="15.24" y="-7.62" length="middle" direction="in" rot="R180"/> +<wire x1="-10.16" y1="7.62" x2="10.16" y2="7.62" width="0.254" layer="94"/> +<wire x1="10.16" y1="7.62" x2="10.16" y2="-10.16" width="0.254" layer="94"/> +<wire x1="10.16" y1="-10.16" x2="-10.16" y2="-10.16" width="0.254" layer="94"/> +<wire x1="-10.16" y1="-10.16" x2="-10.16" y2="7.62" width="0.254" layer="94"/> +<text x="-10.16" y="7.62" size="1.778" layer="95">>NAME</text> +<text x="0" y="-12.7" size="1.778" layer="96">>VALUE</text> +</symbol> </symbols> <devicesets> <deviceset name="TLV1117"> @@ -8334,6 +8377,28 @@ We've spent an enormous amount of time creating and checking these footprints an </device> </devices> </deviceset> +<deviceset name="IDT_ICS501"> +<gates> +<gate name="G$1" symbol="IDT_ICS501" x="0" y="0"/> +</gates> +<devices> +<device name="" package="SOIC08"> +<connects> +<connect gate="G$1" pin="CLK" pad="5"/> +<connect gate="G$1" pin="GND" pad="3"/> +<connect gate="G$1" pin="OE" pad="7"/> +<connect gate="G$1" pin="S0" pad="6"/> +<connect gate="G$1" pin="S1" pad="4"/> +<connect gate="G$1" pin="VCC" pad="2"/> +<connect gate="G$1" pin="X1_ICLK" pad="1"/> +<connect gate="G$1" pin="X2" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> </devicesets> </library> <library name="pinhead"> @@ -8544,9 +8609,9 @@ We've spent an enormous amount of time creating and checking these footprints an <part name="QG1" library="crystal" deviceset="XO-" device="14" value="OHM4 OCXO"/> <part name="R1" library="rcl" deviceset="R-EU_" device="R0603"/> <part name="R2" library="rcl" deviceset="R-EU_" device="R0603"/> -<part name="C1" library="rcl" deviceset="C-EU" device="C0603"/> +<part name="C1" library="rcl" deviceset="C-EU" device="C0603" value="10nF"/> <part name="R3" library="pot" deviceset="TRIM_EU-" device="PTSPIN"/> -<part name="C2" library="rcl" deviceset="C-EU" device="C0603"/> +<part name="C2" library="rcl" deviceset="C-EU" device="C0603" value="10nF"/> <part name="C3" library="rcl" deviceset="C-EU" device="C0603"/> <part name="X1" library="con-coax" deviceset="BU-SMA-V" device=""/> <part name="R4" library="rcl" deviceset="R-EU_" device="R0603"/> @@ -8555,21 +8620,30 @@ We've spent an enormous amount of time creating and checking these footprints an <part name="GND1" library="supply1" deviceset="GND" device=""/> <part name="U2" library="laforge" deviceset="TLV1117" device=""/> <part name="U1" library="laforge" deviceset="TPS736XX" device="" value="TPS73650"/> -<part name="C4" library="rcl" deviceset="C-EU" device="C0603"/> +<part name="C4" library="rcl" deviceset="C-EU" device="C0603" value="1uF"/> <part name="X3" library="pinhead" deviceset="PINHD-1X2" device=""/> -<part name="C5" library="rcl" deviceset="C-EU" device="C0603"/> +<part name="C5" library="rcl" deviceset="C-EU" device="C0603" value="10nF"/> <part name="SJ1" library="jumper" deviceset="SJ" device=""/> +<part name="X4" library="pinhead" deviceset="PINHD-1X2" device=""/> +<part name="U3" library="laforge" deviceset="IDT_ICS501" device=""/> +<part name="GND2" library="supply1" deviceset="GND" device=""/> +<part name="R6" library="rcl" deviceset="R-EU_" device="R0603" value="33"/> +<part name="R7" library="rcl" deviceset="R-EU_" device="R0603" value="NC"/> +<part name="R8" library="rcl" deviceset="R-EU_" device="R0603" value="NC"/> +<part name="R9" library="rcl" deviceset="R-EU_" device="R0603" value="NC"/> +<part name="R10" library="rcl" deviceset="R-EU_" device="R0603" value="NC"/> </parts> <sheets> <sheet> <plain> +<text x="58.42" y="12.7" size="1.778" layer="97">For 3V3 output: R1 = 220, R3 = 330</text> </plain> <instances> <instance part="QG1" gate="G$1" x="58.42" y="50.8"/> -<instance part="R1" gate="G$1" x="96.52" y="58.42" rot="R90"/> +<instance part="R1" gate="G$1" x="88.9" y="50.8" rot="R180"/> <instance part="R2" gate="G$1" x="96.52" y="33.02" rot="R90"/> <instance part="C1" gate="G$1" x="38.1" y="53.34"/> -<instance part="R3" gate="1" x="88.9" y="43.18" rot="MR0"/> +<instance part="R3" gate="1" x="88.9" y="40.64" rot="MR0"/> <instance part="C2" gate="G$1" x="73.66" y="33.02"/> <instance part="C3" gate="G$1" x="101.6" y="50.8" rot="R90"/> <instance part="X1" gate="G$1" x="119.38" y="50.8" rot="MR0"/> @@ -8583,18 +8657,24 @@ We've spent an enormous amount of time creating and checking these footprints an <instance part="X3" gate="G$1" x="-27.94" y="66.04" rot="MR0"/> <instance part="C5" gate="G$1" x="30.48" y="33.02"/> <instance part="SJ1" gate="1" x="0" y="76.2"/> +<instance part="X4" gate="G$1" x="-33.02" y="53.34" rot="MR0"/> +<instance part="U3" gate="G$1" x="48.26" y="93.98"/> +<instance part="GND2" gate="1" x="30.48" y="73.66"/> +<instance part="R6" gate="G$1" x="83.82" y="91.44" rot="R180"/> +<instance part="R7" gate="G$1" x="27.94" y="86.36" rot="R270"/> +<instance part="R8" gate="G$1" x="20.32" y="86.36" rot="R270"/> +<instance part="R9" gate="G$1" x="27.94" y="101.6" rot="R270"/> +<instance part="R10" gate="G$1" x="20.32" y="101.6" rot="R270"/> </instances> <busses> </busses> <nets> <net name="N$1" class="0"> <segment> -<pinref part="QG1" gate="G$1" pin="OUT"/> <pinref part="R2" gate="G$1" pin="2"/> -<wire x1="71.12" y1="50.8" x2="96.52" y2="50.8" width="0.1524" layer="91"/> <wire x1="96.52" y1="50.8" x2="96.52" y2="38.1" width="0.1524" layer="91"/> <pinref part="R1" gate="G$1" pin="1"/> -<wire x1="96.52" y1="50.8" x2="96.52" y2="53.34" width="0.1524" layer="91"/> +<wire x1="96.52" y1="50.8" x2="93.98" y2="50.8" width="0.1524" layer="91"/> <junction x="96.52" y="50.8"/> <wire x1="96.52" y1="50.8" x2="99.06" y2="50.8" width="0.1524" layer="91"/> <pinref part="C3" gate="G$1" pin="1"/> @@ -8604,17 +8684,13 @@ We've spent an enormous amount of time creating and checking these footprints an <segment> <pinref part="QG1" gate="G$1" pin="VCC"/> <wire x1="45.72" y1="55.88" x2="45.72" y2="68.58" width="0.1524" layer="91"/> -<pinref part="R1" gate="G$1" pin="2"/> <wire x1="45.72" y1="68.58" x2="81.28" y2="68.58" width="0.1524" layer="91"/> <wire x1="81.28" y1="68.58" x2="88.9" y2="68.58" width="0.1524" layer="91"/> -<wire x1="88.9" y1="68.58" x2="96.52" y2="68.58" width="0.1524" layer="91"/> -<wire x1="96.52" y1="68.58" x2="96.52" y2="63.5" width="0.1524" layer="91"/> <pinref part="C1" gate="G$1" pin="1"/> <wire x1="38.1" y1="55.88" x2="38.1" y2="68.58" width="0.1524" layer="91"/> <wire x1="38.1" y1="68.58" x2="45.72" y2="68.58" width="0.1524" layer="91"/> <pinref part="R3" gate="1" pin="E"/> -<wire x1="88.9" y1="48.26" x2="88.9" y2="68.58" width="0.1524" layer="91"/> -<junction x="88.9" y="68.58"/> +<wire x1="88.9" y1="45.72" x2="88.9" y2="68.58" width="0.1524" layer="91"/> <junction x="45.72" y="68.58"/> <pinref part="R4" gate="G$1" pin="2"/> <wire x1="81.28" y1="63.5" x2="81.28" y2="68.58" width="0.1524" layer="91"/> @@ -8635,6 +8711,19 @@ We've spent an enormous amount of time creating and checking these footprints an <wire x1="15.24" y1="76.2" x2="15.24" y2="68.58" width="0.1524" layer="91"/> <pinref part="SJ1" gate="1" pin="2"/> <wire x1="5.08" y1="76.2" x2="15.24" y2="76.2" width="0.1524" layer="91"/> +<wire x1="15.24" y1="76.2" x2="15.24" y2="109.22" width="0.1524" layer="91"/> +<junction x="15.24" y="76.2"/> +<pinref part="U3" gate="G$1" pin="VCC"/> +<wire x1="33.02" y1="109.22" x2="33.02" y2="99.06" width="0.1524" layer="91"/> +<wire x1="15.24" y1="109.22" x2="20.32" y2="109.22" width="0.1524" layer="91"/> +<pinref part="R10" gate="G$1" pin="1"/> +<wire x1="33.02" y1="109.22" x2="27.94" y2="109.22" width="0.1524" layer="91"/> +<wire x1="27.94" y1="109.22" x2="20.32" y2="109.22" width="0.1524" layer="91"/> +<wire x1="20.32" y1="106.68" x2="20.32" y2="109.22" width="0.1524" layer="91"/> +<pinref part="R9" gate="G$1" pin="1"/> +<wire x1="27.94" y1="106.68" x2="27.94" y2="109.22" width="0.1524" layer="91"/> +<junction x="20.32" y="109.22"/> +<junction x="27.94" y="109.22"/> </segment> </net> <net name="N$5" class="0"> @@ -8642,17 +8731,17 @@ We've spent an enormous amount of time creating and checking these footprints an <pinref part="QG1" gate="G$1" pin="TS"/> <wire x1="71.12" y1="55.88" x2="73.66" y2="55.88" width="0.1524" layer="91"/> <pinref part="C2" gate="G$1" pin="1"/> -<wire x1="73.66" y1="35.56" x2="73.66" y2="43.18" width="0.1524" layer="91"/> -<wire x1="73.66" y1="55.88" x2="73.66" y2="43.18" width="0.1524" layer="91"/> +<wire x1="73.66" y1="35.56" x2="73.66" y2="40.64" width="0.1524" layer="91"/> +<wire x1="73.66" y1="55.88" x2="73.66" y2="40.64" width="0.1524" layer="91"/> <pinref part="R3" gate="1" pin="S"/> -<wire x1="73.66" y1="43.18" x2="81.28" y2="43.18" width="0.1524" layer="91"/> +<wire x1="73.66" y1="40.64" x2="81.28" y2="40.64" width="0.1524" layer="91"/> <pinref part="R5" gate="G$1" pin="2"/> <pinref part="R4" gate="G$1" pin="1"/> -<wire x1="81.28" y1="43.18" x2="83.82" y2="43.18" width="0.1524" layer="91"/> -<wire x1="81.28" y1="38.1" x2="81.28" y2="43.18" width="0.1524" layer="91"/> -<junction x="81.28" y="43.18"/> -<wire x1="81.28" y1="43.18" x2="81.28" y2="53.34" width="0.1524" layer="91"/> -<junction x="73.66" y="43.18"/> +<wire x1="81.28" y1="40.64" x2="83.82" y2="40.64" width="0.1524" layer="91"/> +<wire x1="81.28" y1="38.1" x2="81.28" y2="40.64" width="0.1524" layer="91"/> +<junction x="81.28" y="40.64"/> +<wire x1="81.28" y1="40.64" x2="81.28" y2="53.34" width="0.1524" layer="91"/> +<junction x="73.66" y="40.64"/> </segment> </net> <net name="N$4" class="0"> @@ -8664,6 +8753,9 @@ We've spent an enormous amount of time creating and checking these footprints an <wire x1="114.3" y1="50.8" x2="116.84" y2="50.8" width="0.1524" layer="91"/> <wire x1="114.3" y1="35.56" x2="114.3" y2="50.8" width="0.1524" layer="91"/> <junction x="114.3" y="50.8"/> +<wire x1="114.3" y1="91.44" x2="114.3" y2="50.8" width="0.1524" layer="91"/> +<pinref part="R6" gate="G$1" pin="1"/> +<wire x1="88.9" y1="91.44" x2="114.3" y2="91.44" width="0.1524" layer="91"/> </segment> </net> <net name="GND" class="1"> @@ -8680,7 +8772,7 @@ We've spent an enormous amount of time creating and checking these footprints an <pinref part="C1" gate="G$1" pin="2"/> <wire x1="38.1" y1="25.4" x2="38.1" y2="48.26" width="0.1524" layer="91"/> <pinref part="R3" gate="1" pin="A"/> -<wire x1="88.9" y1="38.1" x2="88.9" y2="25.4" width="0.1524" layer="91"/> +<wire x1="88.9" y1="35.56" x2="88.9" y2="25.4" width="0.1524" layer="91"/> <junction x="88.9" y="25.4"/> <junction x="73.66" y="25.4"/> <pinref part="C2" gate="G$1" pin="2"/> @@ -8723,12 +8815,32 @@ We've spent an enormous amount of time creating and checking these footprints an <junction x="0" y="25.4"/> <pinref part="X3" gate="G$1" pin="2"/> <wire x1="-25.4" y1="66.04" x2="-22.86" y2="66.04" width="0.1524" layer="91"/> -<wire x1="-22.86" y1="66.04" x2="-22.86" y2="25.4" width="0.1524" layer="91"/> +<wire x1="-22.86" y1="66.04" x2="-22.86" y2="53.34" width="0.1524" layer="91"/> +<wire x1="-22.86" y1="53.34" x2="-22.86" y2="25.4" width="0.1524" layer="91"/> <wire x1="-22.86" y1="25.4" x2="-17.78" y2="25.4" width="0.1524" layer="91"/> <junction x="-17.78" y="25.4"/> <pinref part="C5" gate="G$1" pin="2"/> <wire x1="30.48" y1="27.94" x2="30.48" y2="25.4" width="0.1524" layer="91"/> <junction x="30.48" y="25.4"/> +<pinref part="X4" gate="G$1" pin="2"/> +<wire x1="-30.48" y1="53.34" x2="-22.86" y2="53.34" width="0.1524" layer="91"/> +<junction x="-22.86" y="53.34"/> +<junction x="81.28" y="25.4"/> +</segment> +<segment> +<pinref part="U3" gate="G$1" pin="GND"/> +<pinref part="GND2" gate="1" pin="GND"/> +<wire x1="33.02" y1="86.36" x2="30.48" y2="86.36" width="0.1524" layer="91"/> +<wire x1="30.48" y1="86.36" x2="30.48" y2="78.74" width="0.1524" layer="91"/> +<pinref part="R8" gate="G$1" pin="2"/> +<wire x1="30.48" y1="78.74" x2="30.48" y2="76.2" width="0.1524" layer="91"/> +<wire x1="20.32" y1="81.28" x2="20.32" y2="78.74" width="0.1524" layer="91"/> +<wire x1="20.32" y1="78.74" x2="27.94" y2="78.74" width="0.1524" layer="91"/> +<pinref part="R7" gate="G$1" pin="2"/> +<wire x1="27.94" y1="78.74" x2="30.48" y2="78.74" width="0.1524" layer="91"/> +<wire x1="27.94" y1="81.28" x2="27.94" y2="78.74" width="0.1524" layer="91"/> +<junction x="27.94" y="78.74"/> +<junction x="30.48" y="78.74"/> </segment> </net> <net name="N$3" class="1"> @@ -8738,8 +8850,9 @@ We've spent an enormous amount of time creating and checking these footprints an <pinref part="U1" gate="G$1" pin="IN"/> <wire x1="7.62" y1="50.8" x2="5.08" y2="50.8" width="0.1524" layer="91"/> <wire x1="5.08" y1="50.8" x2="-17.78" y2="50.8" width="0.1524" layer="91"/> -<wire x1="-17.78" y1="50.8" x2="-17.78" y2="68.58" width="0.1524" layer="91"/> +<wire x1="-17.78" y1="50.8" x2="-17.78" y2="55.88" width="0.1524" layer="91"/> <junction x="-17.78" y="68.58"/> +<wire x1="-17.78" y1="55.88" x2="-17.78" y2="68.58" width="0.1524" layer="91"/> <wire x1="5.08" y1="50.8" x2="5.08" y2="45.72" width="0.1524" layer="91"/> <pinref part="U1" gate="G$1" pin="EN"/> <wire x1="5.08" y1="45.72" x2="7.62" y2="45.72" width="0.1524" layer="91"/> @@ -8752,6 +8865,9 @@ We've spent an enormous amount of time creating and checking these footprints an <wire x1="-17.78" y1="68.58" x2="-17.78" y2="76.2" width="0.1524" layer="91"/> <pinref part="SJ1" gate="1" pin="1"/> <wire x1="-17.78" y1="76.2" x2="-5.08" y2="76.2" width="0.1524" layer="91"/> +<pinref part="X4" gate="G$1" pin="1"/> +<wire x1="-30.48" y1="55.88" x2="-17.78" y2="55.88" width="0.1524" layer="91"/> +<junction x="-17.78" y="55.88"/> </segment> </net> <net name="N$2" class="0"> @@ -8761,9 +8877,54 @@ We've spent an enormous amount of time creating and checking these footprints an <wire x1="30.48" y1="43.18" x2="30.48" y2="35.56" width="0.1524" layer="91"/> </segment> </net> +<net name="N$6" class="0"> +<segment> +<pinref part="QG1" gate="G$1" pin="OUT"/> +<pinref part="R1" gate="G$1" pin="2"/> +<wire x1="71.12" y1="50.8" x2="76.2" y2="50.8" width="0.1524" layer="91"/> +<pinref part="U3" gate="G$1" pin="X1_ICLK"/> +<wire x1="76.2" y1="50.8" x2="83.82" y2="50.8" width="0.1524" layer="91"/> +<wire x1="63.5" y1="99.06" x2="76.2" y2="99.06" width="0.1524" layer="91"/> +<wire x1="76.2" y1="99.06" x2="76.2" y2="50.8" width="0.1524" layer="91"/> +<junction x="76.2" y="50.8"/> +</segment> +</net> +<net name="N$7" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="CLK"/> +<pinref part="R6" gate="G$1" pin="2"/> +<wire x1="63.5" y1="91.44" x2="78.74" y2="91.44" width="0.1524" layer="91"/> +</segment> +</net> +<net name="N$8" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="S1"/> +<pinref part="R7" gate="G$1" pin="1"/> +<wire x1="33.02" y1="91.44" x2="27.94" y2="91.44" width="0.1524" layer="91"/> +<pinref part="R9" gate="G$1" pin="2"/> +<wire x1="27.94" y1="96.52" x2="27.94" y2="91.44" width="0.1524" layer="91"/> +<junction x="27.94" y="91.44"/> +</segment> +</net> +<net name="N$9" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="S0"/> +<pinref part="R8" gate="G$1" pin="1"/> +<wire x1="33.02" y1="93.98" x2="20.32" y2="93.98" width="0.1524" layer="91"/> +<wire x1="20.32" y1="93.98" x2="20.32" y2="91.44" width="0.1524" layer="91"/> +<pinref part="R10" gate="G$1" pin="2"/> +<wire x1="20.32" y1="96.52" x2="20.32" y2="93.98" width="0.1524" layer="91"/> +<junction x="20.32" y="93.98"/> +</segment> +</net> </nets> </sheet> </sheets> +<errors> +<approved hash="104,1,45.72,55.88,QG1,VCC,5V,,,"/> +<approved hash="104,1,20.32,38.1,U1,GND1,GND,,,"/> +<approved hash="104,1,33.02,99.06,U3,VCC,5V,,,"/> +</errors> </schematic> </drawing> </eagle> |