| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
TP_VPF_ENHANCED - not in TP_VPF_ABSOLUTE
|
|
values that might change at runtime are moved to set_system_infos()
which we might now also call at runtime to update the BTS with
changes in the SI
|
|
it's sufficient if we keep the state of cell barring in one place
|
|
we need to set newbfd->priv_nr to 2+trx_id, rather than keeping
it '2' all the time, as it is used to look-up the e1i_ts when
we receive a packet. A constant '2' would always match to TRX 0.
we also need to keep one separate bit for each TRX state in order
to properly generate the EVT_E1_TEI_UP event for trx > 0.
|
|
|
|
Possible crash fixes by preventing accessing the
array out of bounds.
|
|
* Use >= in this case as we start counting the trx from 0
* This is fixing a problem with multi trx config
|
|
|
|
This implements the handover algorithm (and associated parameters)
as described in Chapter 8 of the book "Performance Enhancements in
a Frequency |Hopping GSM Network" by Thomas Toftegard Nielsen and Jeroen
Wigard.
The parameters such as averaging windows are configured in struct
gsm_network. We keep some state to trakc up to 10 neighbors as
they are being reported from the MS.
This has so far only been tested in a network with two BTS that
have each other as neighbor. Networks with morge neighbors might
encounter bugs.
|
|
After receiving the HANDOVER COMPLETE on the new channel, we mark the
old channel as INACTIVE and try to release it ASAP.
|
|
This allows us to block packets that we have received after the channel
is no longer being used. This is visible during handover, where we still
receive a measurement report after the MS has switched to the new channel.
This leftover measurement report then attempts to trigger another handover,
which si bogus and will fail - and thus only consumes resources.
With the new LCHAN_S_ACTIVE state, we can check for this when processing
the measurement report.
|
|
This provides two functions: get_meas_rep_avg() to obtain the sliding
window average of one particular field, and meas_rep_n_out_of_m_be()
to check if at least N out of M measurments are >= BE.
|
|
|
|
If a RF channel is assigned but no response is ever heard from
the phone, we will receive a CONNECTION FAIL from the BTS,
triggering a RF release freeing the channel. Then sometime later,
T3101 will expire as well and free the channel again ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
- Need to use sms.id for the ORDER BY since 'subscriber' also has 'id'
- Need to add the join clause between 'SMS' and 'subscriber'
- Add a LIMIT 1 (probably no impact for the db size we're dealing with
here, but with large DB and mysql/postgresql this can help the planner)
- (fix a wrong comment in passing ...)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
|
|
This patch takes care of handling the RTP streams / sockets during
an in-call handover from one BTS to another BTS.
It only works in combination with rtp_proxy mode.
|
|
Our RTP sockets are no longer just for the proxy mode, so having
"proxy" in the function name is really misleading.
|
|
This is not really nice, but we will soon have multiple users of
the CRCX / MDCX / DLCX signals, and we cannot guarantee the ordering
of them. So as a workaround, we move the RTP socket creation and
deletion into the core abis_rsl codebase.
|
|
We cannot support in-call handover of calls without a RTP proxy,
since at the time of the handover the SSRC, sequence number and
timestamp of the RTP frames change.
|
|
Since the MNCC API can now send and receive frames to/from the MNCC
application, we can also implement a proxy this way. Not at the RTP/UDP packet
level, but at the 'TCH speech frame' level.
Especially for handover, we need this mode as the receiver in the BTS needs a
persistent SSRC and monotonic frame numbers / timestamps.
|
|
and instead declare it in gsm_data.h
|
|
During handover, we will not send RTP frames for quite some time. However,
the way the rtp_send code is structured, it will increment the timestamp
with a fixed amount every time we send a frame, independent how much wallclock
time has actually passed.
This code is a hack to update the sequence number and timestamp in case it
seems to be wrong. It makes handover much more reliable.
|
|
|
|
PAGING_COMPLETED can be signalled without an active lchan in
case it was unable to page the repsective subscriber.
|
|
|
|
|
|
trans_lchan_change() takes care of use counts for us.
|
|
This is just the minimal support to receive and send EFR codec
RTP frames.
We are missing the code to convert TRAU frames in EFR format!
|
|
Instead of passing TRAU frames down the MNCC API to the call control
application like MNCC, we now decode the TRAU frame into the actual codec
frame. We do the same with the RTP packets in case of ip.access and
thus have a unified format of passing codec data from the BTS to
an application, independent of the BTS type.
This is only implemented for V1 full-rate at the moment, and needs
to be fixed.
|
|
|
|
NCELL=7 inidicates that there was no neighbor cell info in the SI5
on the SACCH.
|
|
|
|
It seems that depending on the manufacturer, there is a need to include
the L2 pseudo-length in the SI5+SI6 messasges (SACCH FILLING)
Thanks to Dieter for pointing this out.
|
|
|
|
|
|
Keeping all parameters for each RTP connection in the abis_ip member of
lchan will help us with actual TCH handover later on.
|
|
|
|
According to GSM 04.07 11.2.3.1.3 , TID 7 is "reserved
for future extensions".
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Multiple CM SERVICE REQUEST can happen on a single RR
connection, in this case, since the subscr reference is
tracked through lchan->subscr and will only be put'd once
on lchan_free, we need to make sure we don't get several
reference ....
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
'unknown' has a negative connotation for a case that's totally
normal so refer to it as 'new' so it doesn't sound like a problem.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
In SMS debug messages, we always display the transaction ID
as if we were 'sending' the message.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
lchan
also, ensure that we don't print debug messages about handover in non-handover
channel activation cases.
|
|
|
|
|
|
|
