Age | Commit message (Collapse) | Author | Files | Lines |
|
These functions are currently located in libmsc/gsm_04_08.c together
with other symbols that (transitively) depend on many external
symbols (and thus libraries) that aren't otherwise needed by e.g.
osmo-bsc.
Since gsm48_tx_mm_serv_ack() will be needed by osmo-bsc, these
functions are moved to avoid the dependency on gsm_04_08.o.
Sponsored-by: On-Waves ehf
|
|
Remove ournode_exit_cmd, ournode_end_cmd, and bsc_install_default()
since this functionality is provided by the current libosmocore.
Replace calls to bsc_install_default() by call to
vty_install_default() with the following semantic patch:
@rule1@
expression N;
@@
- bsc_install_default(N);
+ vty_install_default(N);
Ticket: OW#952
Sponsored-by: On-Waves ehf
|
|
|
|
This adds in-place patching of the time information in the
MM INFORMATION message. The timezone in the 'Local time zone' and
the 'Universal time and local time zone' information elements
and the offset in the 'Network Daylight Saving Time' information
element are optionally set.
The new values are determined by the 'timezone' vty command in the
config_net_bts node. That command is extended by an optional
DST offset parameter.
Tests are provided for the vty part and for the plain
bsc_scan_msc_msg() function.
Sponsored-by: On-Waves ehf
Ticket: OW#978
|
|
|
|
Based on the feedback of Peter from the mailinglist, move the
writing code to a new method and return early if there is no
bts->model.
|
|
This stores the last SET rf_locked control command along with a
timestamp. The 'show network' vty command is extended to show
this information.
Ticket: OW#659
|
|
This prevents the application from crashing when there is a half
configured BTS (e.g. by using the command 'bts 1' when there isn't
a BTS 1) and the 'write' command is used.
|
|
In case the allocation of con is failing, do not attempt to
print con->name as this will be a null pointer dereference.
Fixes: Coverity CID 1076318
|
|
It was possible to cause a crash by enabling and disabling the
MSC connection. The enabling lead to scheduling a connection
and the second call was not stopping the timer.
|
|
Assign a static name to a MSC Connection and use it. In case there
are multiple connections we can now more easily identify them.
This is only used for the NAT right now, the BSC could start to
name the various MSC connections too.
|
|
Add bsc_install_default() and replace all install_default()
This patch adds bsc_install_default() which calls install_default()
and add 'exit' and 'end'. All other calls to install_default() are
replaced by calls to bsc_install_default().
Since 'exit' and 'end' are now added automatically to each node, the
explicit registrations of these commands are removed by this patch,
too.
The related tests succeed now without work-arounds (except for the
'config' node itself which is part of libosmocore).
|
|
It was possible that the wrong NSEI information was sent to the
BTS. This is because patch_nm_tables is not called before sending
the data to the BTS. This will break when two BTS connect more or
less at the same time.
Stop using the arrays directly and instead introduce a method
that will patch the table and return the data and length. This
makes sure that all users patch the table before we send the
data to the BTS.
I bootstrapped a sysmoBTS and I can bring up rsl. The device is
running with a dummy load so I couldn't do more verification.
|
|
Disable the periodic LU using "no periodic location update" VTY
command. In that case set the expire_lu to 0 which will then be
translated to a NULL in the database layer. This leads to a bit of
copy and paste in the db_sync_subscriber method but I don't see
how we could easily use 'datetime(%i, 'unixepoch')' and 'NULL'
at the same time.
Change the query to find expired queries to check for NOT NULL
and the time being in the past. This means if there are still
old subscribers in the database they might not be expired. One
would need to execute a query like "UPATE Subscriber SET expire_lu
= 0 WHERE expire_lu is null". The same applies when disabling the
periodic LU. One would need to update the database by hand.
Manual tests executed/passed:
1.) periodic LU enabled:
* use gst LUTest.st to do a LU
* UPDATE Subscriber SET expire_lu=datetime('now');
* observe the subscriber being expired (it was)
2.) periodic LU disabled:
* use gst LUTest.st to do a LU
* verify that the expire_lu is NULL in the database
|
|
bsc_api.c:417:3: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘unsigned int’ [-Wformat]
bsc_api.c: In function ‘handle_ass_fail’:
bsc_api.c:458:3: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘unsigned int’ [-Wformat]
db.c: In function ‘db_sync_subscriber’:
db.c:785:3: warning: format ‘%i’ expects argument of type ‘int’, but argument 8 has type ‘time_t’ [-Wformat]
osmo_msc.c: In function ‘msc_release_connection’:
osmo_msc.c:145:20: warning: unused variable ‘trans’ [-Wunused-variable]
smpp_smsc.c: In function ‘link_accept_cb’:
smpp_smsc.c:891:24: warning: assignment from incompatible pointer type [enabled by default]
smpp_smsc.c:271:1: warning: ‘esme_by_system_id’ defined but not used [-Wunused-function]
smpp_openbsc.c: In function ‘smpp_openbsc_init’:
smpp_openbsc.c:545:2: warning: implicit declaration of function ‘smpp_vty_init’ [-Wimplicit-function-declaration]
osmo_bsc_ctrl.c: In function ‘verify_bts_loc’:
osmo_bsc_ctrl.c:340:19: warning: variable ‘height’ set but not used [-Wunused-but-set-variable
smpp_mirror.c: In function ‘main’:
smpp_mirror.c:297:2: warning: implicit declaration of function ‘osmo_init_logging’ [-Wimplicit-function-declaration]
|
|
Array compared against 0 (NO_EFFECT)
array_null: Comparing an array to null is not useful: "subscr->imsi"
Fixes: Coverity CID 1040716
|
|
The support has been implemented for an old model, we were told that
newer versions would be made incompatible with OpenBSC. Ther are
various warnings in the code and coverity has found some new ones.
Just remove the code as we don't know of anyone using this code.
|
|
In case the specified trx number is not configured, do not crash
but return NULL from the function. The libosmo-abis library should
close the connection for us then.
|
|
|
|
Since automake 1.13 INCLUDES is depricates and causes a warning
|
|
For debugging GB-proxy/IPA issues it is nice to see the state of
the OML objects.
|
|
A channel that fails to send an ACK/NACK/REL within the four second
timeout is now marked as broken. In case the release comes in late
it will be ignored. The lchan should already been freed and for now
we don't want to trust the channel.
In the future we might want to send a "release" for a channel that
got activated ack late and just set the state to none on a channel
that is released acked late.
The late ACK and REL has been tested with two manual tests using the
fakebts. The channels remained blocked even after having received
the ACK message here. The NACK case has not been manually tested.
|
|
Assume that there is a bsc_gsmnet and modify the ipaccess-config to
provide this symbol. If a bsc_gsmmnet is not available when linked
the linker will complain and fail.
E.g. give an error like this:
../../src/libbsc/libbsc.a(bts_ipaccess_nanobts.o): In function `ipaccess_sign_link_up':
src/libbsc/bts_ipaccess_nanobts.c:550: undefined reference to `bsc_gsmnet'
|
|
Use the is_ipaccess_bts method to check if this is either is
nanoBTS or sysmoBTS. The sysmobts type can now be used to bootstrap
a bts.
|
|
Make sure that the bts_ipa_nm_sig_cb is only installed once. In
a nanoBTS + sysmoBTS network the _start method will be called
for each mode leading to the handler being registered twice.
Make sure that there is only one handler registered by unregistering
a previously installed handler. The osmo_signal_unregister_handler
will remove 0 or 1 handlers per invocation and we only add one
handler in this file so it is always balanced.
|
|
The nanoBTS code is trying to find a struct gsm_bts based on
the ipaccess_gsmnet and the ipaccess_unit data. The pointer is
not initialized in the case of a sysmoBTS leading to a classic
NULL pointer dereference.
Move the feature init into the _init method. This way we can
re-use the start code of the nanoBTS. This ensures that the
ipaccess_gsmnet pointer is properly initialized and that the
signal handlers are installed.
|
|
In order to enable GPRS downlink measurements at mobile, the
network-control-order must be set to nc1.
|
|
This patch adds a new VTY command "ip.access rsl-ip A.B.C.D" at the
BTS level. If you set this IP address, the BTS will be instructed to
establish the RSL link to the indiciated IP address, rather than using
the same as for the OML link (default).
Use "ip.access rsl-ip 0" to disable the feature.
|
|
Inside the SI1 rest_octets we will need to indicate if the ARFCN
is band 1800 or 1900. If the BTS is either 850 or 1900 we assume
we are running a PCS network, otherwise it is a DCS network.
The band indicator is not documented in GSM 04.08 but it is in the
GSM 05.14 version 6.1.0 Release 1997.
|
|
abis_rsl.c:332:23: warning: 'memset' call operates on objects of type 'struct rsl_ie_chan_mode'
while the size is based on a different type 'struct rsl_ie_chan_mode *'
[-Wsizeof-pointer-memaccess]
memset(cm, 0, sizeof(cm));
~~ ^~
abis_rsl.c:332:23: note: did you mean to dereference the argument to 'sizeof' (and multiply it
by the number of elements)?
memset(cm, 0, sizeof(cm));
^~
1 warning generated.
|
|
|
|
The paging structure is still initialized lazily and we attempt
to traverse it before it is ready. The crash was discovered by
Katerina. Removing the lazy initialization will take a bit of work
as the gsm_data_shared is used by the osmo-bts and the OpenBSC but
paging is different.
|
|
Katerina pointed out that some nodes are not fully documented and
proposed some messages. The token/timeout messages were correct, I
have modified the other messages. I removed the full-stop from the
PING/PONG documentation as we are normally not using a full sentence.
|
|
The message was corrupt at several points. They are fixed now and
successfully tested.
A default T3122 timer value of 10 is defined by default now. If set to 0,
the reject message will not be sent. Note that when using existing configs
with T3122 value set to 0.
|
|
|
|
The RF lock excluded BTS was not paged at all. Now forward the
paging message to the handler and call a function that will check
if this LAC can be paged right now. Introduce a new paging method
that allows to page on a dedicated bts, refactor the code to use
this method for paging.
|
|
Some BTS might be in locations where they can run all the time,
allow to exclude them from the global lock handling.
|
|
For PCS1900 the SI1 does not contain the ARFCN of the serving cell.
This is because the arfcn2band method will return GSM_BAND_1800 and
not GSM_BAND_1900. The academic fix would be to set the ARFCN_PCS bit
but this would require increasing the bitvector sizes from 1024/8 to
(0x8000 + 1024) / 8. This would increase the storage size for each
bitvector by three.
It is not possible to have DCS1800 and PCS1900 in one network so we
can avoid increasing the memory usage and check if the ARFCN resolved
to 1800 and then check if the BTS is a 1900 BTS and then claim that
this is compatible.
|
|
This makes reading the condition more easy and allows me to fix it
for GSM1900 more easily and I can remove one level of indention.
|
|
The code predates the TLV parser and we were parsing the RLM from the
wrong offset. In general we were using the length of the TLV which
happened to be equal to the T200 indication.
After consulting the RLM cuases not every of them should generate a
BSC_RLLR_IND_ERR_IND as these are forwarded to the MSC as a SAPI reject
right now.
TLV parsing now generates this due a bug in the osmo-bts code:
abis_rsl.c:1605 (bts=0,trx=0,ts=2,ss=0) SAPI=0 <0000> abis_rsl.c:1547 (bts=0,trx=0,ts=2,ss=0) ERROR INDICATION cause=Fraeme not implemented
|
|
|
|
For short IP failures we want the RF to stay up and wait for
the re-connect but in case the A-link is gone too long it is
good to switch off the RF and wait for commands to enable it
again.
|
|
Use the delayed scheduling feature of the osmo_bsc_rf class to
avoid crashing the site controller of the nanoBTS.
|
|
|
|
|
|
The SDCCH8 is only allowed on trx 0 if there is no BCCH/SDCCH4 on it.
|
|
Handle the mr_config request and set the AMR multirate config for
the given MSC. Initialize the mr_config with the AMR5.9 default we
have been using until now.
|
|
libcommon: Default to 30min location update period
libbsc: Limit VTY value for periodic update and disallow the value 0
According to GSM 04.08 Table 10.5.33 "The value 0 is used for infinite
timeout value i.e. periodic updating shall not be used within the cell."
This was the default value until now, but the code that deals with
expiring inactive subscribers in the next commit can't handle that case
so this remains a TODO for now.
|
|
The actual command implementation was already for this, but some
bad vty parsing prevented optional range arguments from working
properly.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|