| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
|
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I0dfbcb7d1a579211180f71319982820d8700afab
|
|
Doesn't make sense to switch this to struct vlr_subscr when it isn't used at
all. So let's remove it.
Change-Id: Ifa5901f8bf1aed3981841d24d4ec8d659f3de7a9
|
|
|
|
Send the signal whenever a MSC appears to be authenticated.
|
|
This was reported by Kevin when he was testing handover. The problem
is the order of the signal handlers for S_ABISIP_CRCX_ACK. Right now
the handover signal handler is called before the one inside the libmsc
gsm_04_08.c. This means S_HANDOVER_ACK is signalled _before_ there is a
rtp socket created for the channel. The result is that the MDCX will
never be sent and the called will not be properly switched _after_ the
handover detection.
I do not want to play with the order of signal handlers, remove the
CRCX ack handling from the handover_logic.c and force the NITB (and
later the BSC) to check if the lchan is involved with a handover and
do the switching in there. This means right now we do what two signal
handlers did in one.
Reproduced and tested with the FakeBTS Handover test.
Log message:
<0004> abis_rsl.c:1954 (bts=1,trx=0,ts=3,ss=0) IPAC_CRCX_ACK ...
<000c> gsm_04_08.c:1400 no RTP socket for new_lchan
<001a> rtp_proxy.c:533 rtp_socket_create(): success
<001a> rtp_proxy.c:615 rtp_socket_bind(rs=0x48703c8, IP=0.0.0.0): ...
|
|
The previous code didn't work as expected. The trx and dst pointer
are located in an union and in the case of the Abis code the dst
is used to point to the signalling link timeslot and not the TRX.
The is_ipaccess_bts always returned false because the dst was casted
to a trx while it was no trx.
This fix was tested with the nack_test/NACKTest.st of the test repo.
|
|
which removes some further dependencies of libgb to openbsc internal
code and data.
|
|
Introduce a SS_CCCH for the paging and the rach load. The paging
code could now start using the signal.
GCC warning:
abis_rsl.c: In function ‘rsl_rx_ccch_load’:
abis_rsl.c:1371:11: warning: variable ‘rach_access_count’ set but not used [-Wunused-but-set-variable]
abis_rsl.c:1370:11: warning: variable ‘rach_busy_count’ set but not used [-Wunused-but-set-variable]
abis_rsl.c:1369:11: warning: variable ‘rach_slot_count’ set but not used [-Wunused-but-set-variable]
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
Scenario: BTS are configured and working, then the BSC stops working
for some reason (crash or administrative stop).
If the BSC comes back to life, LAPD among other things does not know
about the previous existing TEIs. Instead of ignoring these frames,
we notify the driver that we are seeing frames with unknown TEIs, so
it can try to recover, e.g. by resending the SABM message.
|
|
This was done with sed on the files.
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
|
|
... this allows the BTS driver to decide if it should handle the event at all
|
|
|
|
|
|
... and re-start LAPD SABM as required
|
|
This allows other code to listen ot a signal about a new line that
was just configured.
|
|
bsc_init.c was a big mess even only for two supported BTS models,
so before adding more BTS types, this needs a cleanup.
All the BTS specific code from bsc_init.c has now moved into
bts_{siemens_bs11,ipaccess_nanobts}.c
This has required that input_event() and nm_state_event() get both
converted to proper libosmocore signals instead of referencing external
symbols.
|
|
Instead of creating the sockets in the RSL code we will do this
in the CRCX_ACK, MDCX_ACK, DLCX_IND signal handler of gsm_04_08.
Introduce a handover signal so we can repatch the RTP sockets in
the gsm_04_08 as well.
|
|
The reason for this is quite simple: We want to make sure anyone
running a customized version of OpenBSC to operate a network will
have to release all custom modifiations to the source code.
|
|
The SS_LCHAN signals now always include the lchan_sig_data. For
the measurement report it will optionally include the measurement
report as well. Attempt to update all handlers of this signal as well
|
|
This is providing access to the paging result, the sms,
the transaction. This will allow the SMS queue to do
decisions based on the source of the failure.
|
|
This attempts to dispatch a signal whenever a MT-sms is failing. In
some cases, e.g. with freeing the transaction, this will also happen
for MO-sms.
|
|
Start counting the attempts of each paging request and call
the callback with the PAGING_BUSY type when the paging request
timed out but the subscriber was not paged at all. This can
only happen with a huge paging backlog.
In case the system has so many pending paging
|
|
Send a signal, this way another module can close all connections
to the MSC and all local channels.
|
|
|
|
Also, we now re-start the network listen test after it has finished,
so if you run a test from ipaccess-find, the test will get re-started
and re-started all the time.
|
|
Provide the message type and the msgb of the NACK message.
|
|
Do not use the lchan for the paging but operate on the
subscriber_connection, change the signals too to not carry
the lchan but the subscriber connection... the silent call
and vty code still assume there is a lchan inside the
subscriber connection.
|
|
Send the IPA Restart to a given BTS/TRX, change the signal callbacks
to carry the trx instead of the BTS so we have an easy access to the
right TRX and change the ipaccess-config to use that TRX. This is
fixing the restart with a multi TRX setup.
Even if we have the msg->trx, use the gsm_bts_trx_by_nr and get
the TRX from the fom header. This is because the OpenBSC and the
BTS numbering might not match for the multi TRX case.
|
|
The Gb Proxy can then restart the RESET procedure.
|
|
The signals will be sent upon reception of NS-BLOCK/UNBLOCK/RESET PDUs
We also export functions to generate/send BLOCK/UNBLOCK and RESET.
|
|
|
|
This code simply enables the channel allocator to understand the
dynamic TCH/F / PDCH channel type as used by ip.access nanoBTS.
It does not actually try to switch the dynamic mode, but instead
sends signals to a (not yet present) dynamic switching algorithm.
|
|
This library is intended to collect all generic/common funcitionality
of all Osmocom.org projects, including OpenBSC but also OsmocomBB
The library currently includes the following modules:
bitvec, comp128, gsm_utils, msgb, select, signal, statistics, talloc, timer,
tlv_parse, linuxlist
msgb allocation error debugging had to be temporarily disabled as it depends on
'debug.c' functionality which at the moment remains in OpenBSC
|
|
This is useful information to know and actually fixes a segfault
in rllp.c where lchan is accessed even tough it could be NULL in
case of failure.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
* Add the NACK version to the list
* Dispatch the signal when we receive the message
* Handle it in ipaccess-config by exiting the application
|
|
* Do not issue the restart right aways if we have OML IP or
software load in the queue (hint, we need a real queue of operations
to carry out... with one big state machine)
* Change the signal_data of ipacc ACK/NACK to contain the msg type
and the bts pointer.
* Issue a restart for software load and OML and use the BTS pointer
we got out of the new signal data.
|
|
* Add the signal definition to signal.h
* Dispatch the signal from abis_nm.c
* Handle it in ipaccess-config.c and say we are done with work
|
|
Keeping all parameters for each RTP connection in the abis_ip member of
lchan will help us with actual TCH handover later on.
|
|
|
|
This is used to notify various parts of OpenBSC that we're shutting
down.
|
|
This patch introduces the S_LCHAN_MEAS_REP signal which is used to export
measurement reports as input to the yet-to-be-written handover algorithm.
|
|
This introduces the signals S_LCHAN_ACTIVATE_{ACK,NACK} and
S_LCAN_HANDOVER_{FAIL,COMPL,DETECT} as well as code that actually issues
those signals. The signals are relevant for a yet-to-be-written handover
control logic.
|
|
IPA is naming these functions CRCX, MDCX, DLCX to follow
the naming of the MediaGatewayControlProtocol. Change the
code to go from BIND to CRCX (create connection) and from
CONNECT to MDCX (modify connection).
Connect indicates that it is only possible to call it once
while it is possible to call it more than once to modify
the audio parmaters and such. So the IPA terminology is
making a bit more sense here (now that we know it).
|
|
This allows the administrator to use the vty interface to issue a silent
call to a given subscriber by using
"subscriber extension XXXX silent call start"
and stopping that silent call with
"subscriber extension XXXX silent call stop"
|
|
|
|
|
