Age | Commit message (Collapse) | Author | Files | Lines |
|
Numerous manual adjustments are included to make sense on the sysmocom/iu branch:
* gsm_04_08_gprs.h has moved to libosmocore on the master branch, but
sysmocom/iu has added some entries. Until it is clear whether to move the
additions to libosmocore as well, keep gsm_04_08_gprs.h on sysmocom/iu with
merely the additions.
* Thus, keep using the old gsm_04_08_gprs.[hc] from openbsc in the Makefiles,
but only where the sysmocom/iu additions are needed.
* In openbsc's gsm_04_08_gprs.h,
* include the libosmocore gsm_04_08_gprs.h,
* use '#pragma once' instead of #ifndef and
* add a TODO comment about moving the rest to libosmocore.
* Apply the addition of an osmo_auth_vector to gsm_auth_tuple: in the Iu auth
vector hacks, use the gsm_auth_tuple.vec instead of a local struct.
See iu_hack__get_hardcoded_auth_tuple() and gsm48_rx_gmm_att_req().
* In the si2q tests, pass NULL as ctx to gsm_network_init().
* In cscn_main.c, add a debug log that was originally added to osmo-nitb.
* openbsc/.gitignore: keep only one addition of 'writtenconfig'
Conflicts:
openbsc/include/openbsc/gprs_sgsn.h
openbsc/include/openbsc/gsm_04_08_gprs.h
openbsc/src/gprs/gsm_04_08_gprs.c
openbsc/src/libmsc/gsm_04_08.c
openbsc/src/osmo-cscn/cscn_main.c
openbsc/tests/gsm0408/Makefile.am
|
|
This requires the corresponding commit in libosmocore.
|
|
This needs the corresponding commit in libosmocore which imports
the related functions
|
|
This is a preparation to move the related code to libosmocore, whilst
at the same time generalizing it from GPRS Subscriber Update Protocol
to the Osmocom Generic Subscriber Update Protoco.
|
|
This requres the corresponding commit in libosmocore.
|
|
libbsc and libmsc have conflicting definitions of gsm_subscriber_connection
and do no longer belong together anyway.
Create libxsc, meaning 'lib[bm]sc', to hold all code used by both libmsc
and libbsc, and make sure gsm_subscriber_connection isn't used there.
In various binaries and tests, do not link libbsc and libmsc.
(Note: this commit was reshaped out of a large wip chunk, it may not
compile properly without the subsequent commits)
|
|
|
|
|
|
The diff between this and master will probably need a lot of review and fixes.
The current state does compile, but I expect pretty much everything to be
broken now. Future development will reinstate proper functionality piecemeal.
The first goal is to get basic signalling to work, then SMS. The voice control
(RTP) is completely disabled now (see "#if BEFORE_MSCSPLIT") and will be fixed
last AFAICT.
|
|
Add libiu to contain the parts used by both Iu-CS (in osmo-cscn) and Iu-PS (in
gprs) into libiu. It's rather thin and may make sense to move to osmo-iuh
altogether, eventually.
iu.c is half moved to libiu/, and half to osmo-cscn/iu_cs.c.
|
|
|
|
|
|
First steps towards a new GTP hub. The aim is to mux GTP connections, so that
multiple SGSN <--> GGSN links can pass through a single point. Background:
allow having more than one SGSN, possibly in various remote locations.
The recent addition of OAP to GSUP is related to the same background idea.
(This is a collapsed patch of various changes that do not make sense to review
in chronological order anymore, since a lot of it has thorougly transmorphed
after it was first committed.)
Sponsored-by: On-Waves ehf
|
|
Add oap.[hc] and oap_messages.[hc].
Sponsored-by: On-Waves ehf
|
|
Add new kitchen sink openbsc/utils.h and libcommon/utils.c to make three so far
static functions public (so I can use them in the upcoming OAP code).
A place to put them could have been the gprs_utils.h, but all general functions
in there have a gprs_ prefix, and todo markings to move them away. All other
libcommon headers are too specific, so I opened up this kitchen sink header.
Replace the implementation of encode_big_endian() with a call to
osmo_store64be_ext(). See comments.
Apply the change in Makefiles and C files.
|
|
Move the filter methods to the filter module. This is
still only usable for the NAT and the _dt/_cr filter
routines need to move back to the bsc_nat in the long
run.
|
|
We depend on libosmo-netif unconditionally. Let's use this
definition of rtp and have one portability issue less.
|
|
This commit adds the client code to get subscriber information from a
remote server. It provides an IPA over TCP connection to transmit and
receive GSUP messages.
Sponsored-by: On-Waves ehf
|
|
This patch adds functions to encode and decode GSUP messages. This
does not include the layer 1 framing (IPA). The messages so far
supported are: send_auth_info_*, update_location_*,
location_cancellation_*.
Sponsored-by: On-Waves ehf
|
|
This extends osmo_nitb to offer a UDP feed of real-time measurement
reports, which can be used by (a variety of) external tools for
visualization or other processing.
We also add a small ncurses based tool (meas_vis) which shows a
baragraph display of the last few mobile stations that were active,
indicating their uplink/downlink receive level and quality.
<WARNING>
This sends non-portable structures like gsm_meas_rep over UDP
and assumes the receiver has identical alignment and endianness! Before
this feature is merged, it either needs to be converted to a unix domain
socket (but they don't do multicast, which would be nice) or the wire
format needs to change into something portable with defined alignment
and encoding
</WARNING>
|
|
|
|
Due libdbi 0.9.x being broken I didn't run make distcheck and
apparently Jacob has a similar issue and didn't run it either.
|
|
... causing header files to be missing from 'make dist'.
this was introduced in ba874b82be0ad1752b46009ba403f9b7bf24492d
|
|
|
|
We intend to move some of these routines to libosmocore but to avoid
a feature symbol clash we are prefixing these routines with gprs_.
Done with Jacob
|
|
|
|
This patch moves the files relevant to transcoding from
src/osmo-bsc_mgcp to src/libmgcp and src/include/openbsc. Makefiles
and include directives are being updated accordingly.
Sponsored-by: On-Waves ehf
|
|
This patch adds the voice muxer. You can use this to batch RTP
traffic to reduce bandwidth comsuption. Basically, osmux transforms
RTP flows to a compact batch format, that is later on decompacted
to its original form. Port UDP/1984 is used for the muxer traffic
between osmo-bsc_nat and osmo-bsc_mgcp (in the BSC side). This
feature depends on libosmo-netif, which contains the osmux core
support.
Osmux is requested on-demand via the MGCP CRCX/MDCX messages (using
the vendor-specific extension X-Osmux: on) coming from the BSC-NAT,
so you can selectively enable osmux per BSC from one the bsc-nat.cfg
file, so we have a centralized point to enable/disable osmux.
First thing you need to do is to accept requests to use Osmux,
this can be done from VTY interface of osmo-bsc_nat and
osmo-bsc_mgcp by adding the following line:
mgcp
...
osmux on
osmux batch-factor 4
This just initializes the osmux engine. You still have to specify
what BSC uses osmux from osmo-bsc_nat configuration file:
...
bsc 1
osmux on
bsc 2
...
bsc 3
osmux on
In this case, bsc 1 and 3 should use osmux if possible, bsc 2 does
not have osmux enabled.
Thus, you can selectively enable osmux depending on the BSC, and
we have a centralized point for configuration from the bsc-nat to
enable osmux on demand, as suggested by Holger.
At this moment, this patch contains heavy debug logging for each
RTP packet that can be removed later to save cycles.
The RTP ssrc/seqnum/timestamp is randomly allocated for each MDCX that
is received to configure an endpoint.
|
|
The jenkins runs make distcheck in the default configuration and
not with the nat enabled.
DISTCHECK_CONFIGURE_FLAGS="--enable-nat" make distcheck
|
|
* It is a trie. The max depth of the trie is the length of the
longest prefix. The lookup is O(lookuped_prefix), but as the prefix
length is limited, the lookup time is constant.
* Each node can hold the entire prefix, has place for the rewrite
rule with up to three digits.
* A trie with 20k entries will take about 3MB ram.
* Filling the trie 100 times takes ~800ms on my i7 laptop
* 10.000.000 lookups take 315ms.. (for the same prefix).
* 93/99 lines are tested, 6/6 functions are tested, 49 of 54 branches
are tested. Only memory allocation failures are not covered
* A late addition is to handle the '+' sign and to increase the number
of chars in the rewrite prefix. The timing/line coverage has not
been updated after this change.
|
|
I saw the old copy of the "Appendix J" code too late and I have
discovered some quirks and I am more familar with my implementation.
Most noticable 'w' only needs to be as big as the input arfcn but
requires the 'w' to be initialized. The power_of_2 implementation
differs as well (mine matches the output of wirehsark).
The f0 could be chosen in a better way but right now picking
the lower bound is the easiest. It is not clear if to use
modulo if the range is chosen in the middle. This can be improved
in the future. Right now I have no bit fiddling for range128, 256
and 1024 as I was running out of time.
|
|
This also removes the dependency to osmo_sock() inside libcommon and
replaces it with osmo_sock_* from libosmocore
|
|
|
|
In order to have the MNCC application reliably decide on the codec type,
it needs to know if we are running on a TCH/F or TCH/H. Thus, we pass
lchan_mode as a new parameter to the 'struct gsm_mncc'
|
|
|
|
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
gsm_data.h is the part that contains BSC-specific data, whereas
gsm_data_shared.h is now shareda with osmo-bts
|
|
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
|
|
|
|
The SMSqueue will be responsible of sending to the user. It will
do so in a loop and will also try not to overload the BTS. This
means the throughput of SMS will be limited.
|
|
The grace code will decide if a given connection is allowed to
be made or if it is going to be rejected. For active connections
it is going to send a USSD message.
|
|
|
|
common_vty.c was including bsc_nat.h which tried to
get the sccp/sccp_types.h which is not required to be
installed. Move all structs using/embedding SCCP structures
into the bsc_nat_sccp.h and include. This should fix
the compilation.
|
|
Also, we now re-start the network listen test after it has finished,
so if you run a test from ipaccess-find, the test will get re-started
and re-started all the time.
|
|
|
|
This adds the unix domain socket rf control protocol into
the new subdirectory.
|
|
|
|
|
|
Doh !
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|