aboutsummaryrefslogtreecommitdiffstats
path: root/doc/manuals/vty/sgsn_vty_additions.xml
diff options
context:
space:
mode:
Diffstat (limited to 'doc/manuals/vty/sgsn_vty_additions.xml')
-rw-r--r--doc/manuals/vty/sgsn_vty_additions.xml113
1 files changed, 3 insertions, 110 deletions
diff --git a/doc/manuals/vty/sgsn_vty_additions.xml b/doc/manuals/vty/sgsn_vty_additions.xml
index dd26dbac..660b695f 100644
--- a/doc/manuals/vty/sgsn_vty_additions.xml
+++ b/doc/manuals/vty/sgsn_vty_additions.xml
@@ -1,113 +1,6 @@
<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='26'>
- <child_of nodeid='4' />
- <name>SGSN Configuration Node</name>
- <description>Configure the remote GGSN, access-control and other
- attributes of the SGSN</description>
- <command id='gtp local-ip A.B.C.D'>
- <description>
- Configure the local IP address to which the SGSN should
- bind for the Gp interface (towards the GGSNs).
-
- Please note that in case you would like to run the GGSN
- on the same machine as the SGSN, you can not run both on
- the same IP address. It is suggested to use 127.0.0.1
- for the SGSN and 127.0.0.2 for the GGSN in such
- situations.
- </description>
- </command>
- <command id='ggsn &lt;0-255&gt; remote-ip A.B.C.D'>
- <description>
- Configure a static GGSN with a given numeric identifier
- to use the specified remote IP address.
- </description>
- </command>
- <command id='ggsn &lt;0-255&gt; gtp-version (0|1)'>
- <description>
- Configure whether to use GTPv0 or GTPv1 towards the
- specified GSSN number.
- </description>
- </command>
- <command id='ggsn dynamic'>
- <description>
- Enable dynamic resolving of GGSNs based on DNS resolving
- the APN name like in a GRX-style setup. Changing this
- setting requires a re-start of the SGSN.
- </description>
- </command>
- <command id='grx-dns-add A.B.C.D'>
- <description>
- Use the specified IP address for DNS-resolving the AP
- names to GGSN IP addresses
- </description>
- </command>
- <command id='apn APNAME ggsn &lt;0-255&gt;'>
- <description>
- Map the given APN Name to the given GGSN number.
- </description>
- </command>
- <command id='apn APNAME imsi-prefx IMSIPRE ggsn &lt;0-255&gt;'>
- <description>
- Map the given APN Name to the given GGSN number _only_
- if the IMSI matches the given prefix.
- </description>
- </command>
- <command id='imsi-acl (add|del) IMSI'>
- <description>
- Add or delete the given IMSI to/from the global Access
- Control List.
- </description>
- </command>
- <command id='auth-policy (accept-all|closed|acl-only|remote)'>
- <description>
- Configure the Authorization policy of the SGSN. This
- setting determines which subscribers are permitted to
- register to the network.
- </description>
- </command>
- <command id='gsup remote-ip A.B.C.D'>
- <description>
- Set the IP address of the HLR (gateway) for the GSUP protocol.
- This setting only applies if auth-policy remote is used.
- </description>
- </command>
- <command id='gsup oap-id &lt;0-65535&gt;'>
- <description>
- Set the OAP client ID for authentication on the GSUP
- protocol.
- This setting only applies if auth-policy remote is used.
- </description>
- </command>
- <command id='gsup oap-k K'>
- <description>
- Set the OAP shared secret key K for authentication on
- the GSUP protocol.
- This setting only applies if auth-policy remote is used.
- </description>
- </command>
- <command id='gsup oap-opc OPC'>
- <description>
- Set the OAP shared secret OPC for authentication on the
- GSUP protocol.
- This setting only applies if auth-policy remote is used.
- </description>
- </command>
- <command id='access-point-name NAME'>
- <description>
- Globally allow the given APN name for all subscribers.
- </description>
- </command>
- <command id='cdr filename NAME'>
- <description>
- Set the file name for the call-data-record file,
- logging the data usage of each subscriber.
- </description>
- </command>
- <command id='cdr interval &lt;1-2147483647&gt;'>
- <description>
- Set the interval (in secodnds) for the call-data-record
- file.
- </description>
- </command>
+ <node id='config-sgsn'>
+ <description>Configure the remote GGSN, access-control and other
+ attributes of the SGSN</description>
</node>
</vtydoc>