diff options
Diffstat (limited to 'doc/examples/osmo-nitb')
-rw-r--r-- | doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg | 164 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg | 84 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg | 148 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/bs11/openbsc.cfg | 56 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg | 99 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/nanobts/openbsc.cfg | 77 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg | 117 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/rbs2308/openbsc.cfg | 220 | ||||
-rw-r--r-- | doc/examples/osmo-nitb/sysmobts/openbsc.cfg | 77 |
9 files changed, 1042 insertions, 0 deletions
diff --git a/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg b/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg new file mode 100644 index 000000000..673064491 --- /dev/null +++ b/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg @@ -0,0 +1,164 @@ +! +! OpenBSC (0.9.0.845-57c4) configuration saved from vty +!! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver misdn +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 1 + rrlp mode none + mm info 0 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3141 0 + bts 0 + type bs11 + band GSM900 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator descending + rach tx integer 9 + rach max transmission 7 + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 25 + gprs mode none + trx 0 + rf_locked 0 + arfcn 121 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH + hopping enabled 0 + e1 line 0 timeslot 1 sub-slot full + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 3 + trx 1 + rf_locked 0 + arfcn 119 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config SDCCH8 + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 4 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 4 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 4 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 5 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 5 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 5 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 1 + hopping sequence-number 0 + hopping maio 0 + hopping arfcn add 117 + hopping arfcn add 119 + e1 line 0 timeslot 5 sub-slot 3 diff --git a/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg b/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg new file mode 100644 index 000000000..ca5689fd5 --- /dev/null +++ b/doc/examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg @@ -0,0 +1,84 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver misdn +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + timer t3101 10 + timer t3113 60 + bts 0 + type bs11 + band GSM900 + cell_identity 1 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 25 + trx 0 + arfcn 121 + max_power_red 0 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + e1 line 0 timeslot 1 sub-slot full + timeslot 1 + phys_chan_config SDCCH8 + e1 line 0 timeslot 2 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 3 + trx 1 + arfcn 123 + max_power_red 0 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 3 diff --git a/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg b/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg new file mode 100644 index 000000000..4f194c00c --- /dev/null +++ b/doc/examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg @@ -0,0 +1,148 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + timer t3101 10 + timer t3113 60 + bts 0 + type bs11 + band GSM900 + cell_identity 1 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 25 + trx 0 + arfcn 121 + max_power_red 0 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + e1 line 0 timeslot 1 sub-slot full + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 3 + trx 1 + arfcn 123 + max_power_red 0 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 4 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 5 sub-slot 3 + bts 1 + type bs11 + band GSM900 + location_area_code 2 + training_sequence_code 7 + base_station_id_code 63 + oml e1 line 1 timeslot 6 sub-slot full + oml e1 tei 25 + trx 0 + arfcn 122 + max_power_red 0 + rsl e1 line 1 timeslot 6 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + e1 line 1 timeslot 7 sub-slot 0 + timeslot 1 + phys_chan_config SDCCH8 + e1 line 1 timeslot 7 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 1 timeslot 7 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 1 timeslot 7 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 1 timeslot 8 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 1 timeslot 8 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 1 timeslot 8 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 1 timeslot 8 sub-slot 3 + trx 1 + arfcn 124 + max_power_red 0 + rsl e1 line 1 timeslot 6 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F + e1 line 1 timeslot 9 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + e1 line 1 timeslot 9 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 1 timeslot 9 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 1 timeslot 9 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 1 timeslot 10 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 1 timeslot 10 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 1 timeslot 10 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 1 timeslot 10 sub-slot 3 diff --git a/doc/examples/osmo-nitb/bs11/openbsc.cfg b/doc/examples/osmo-nitb/bs11/openbsc.cfg new file mode 100644 index 000000000..6c47a902d --- /dev/null +++ b/doc/examples/osmo-nitb/bs11/openbsc.cfg @@ -0,0 +1,56 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver misdn +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + timer t3101 10 + timer t3113 60 + bts 0 + type bs11 + band GSM900 + cell_identity 1 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 25 + trx 0 + arfcn 121 + max_power_red 0 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + e1 line 0 timeslot 1 sub-slot full + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 2 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 3 sub-slot 3 + diff --git a/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg b/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg new file mode 100644 index 000000000..3277bea56 --- /dev/null +++ b/doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg @@ -0,0 +1,99 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 1 + rrlp mode none + mm info 0 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3141 0 + bts 0 + type nanobts + band DCS1800 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + ip.access unit_id 1800 0 + oml ip.access stream_id 255 line 0 + gprs mode none + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 0 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + timeslot 1 + phys_chan_config SDCCH8 + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/F + timeslot 6 + phys_chan_config TCH/F + timeslot 7 + phys_chan_config TCH/F + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + max_power_red 0 + rsl e1 tei 0 + timeslot 0 + phys_chan_config SDCCH8 + timeslot 1 + phys_chan_config TCH/F + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/F + timeslot 6 + phys_chan_config TCH/F + timeslot 7 + phys_chan_config TCH/F diff --git a/doc/examples/osmo-nitb/nanobts/openbsc.cfg b/doc/examples/osmo-nitb/nanobts/openbsc.cfg new file mode 100644 index 000000000..cfc1be6b0 --- /dev/null +++ b/doc/examples/osmo-nitb/nanobts/openbsc.cfg @@ -0,0 +1,77 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 1 + rrlp mode none + mm info 1 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3141 0 + bts 0 + type nanobts + band DCS1800 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + ip.access unit_id 1801 0 + oml ip.access stream_id 255 line 0 + gprs mode none + trx 0 + rf_locked 0 + arfcn 514 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + timeslot 1 + phys_chan_config SDCCH8 + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/F + timeslot 6 + phys_chan_config TCH/F + timeslot 7 + phys_chan_config TCH/F diff --git a/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg b/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg new file mode 100644 index 000000000..90386bec2 --- /dev/null +++ b/doc/examples/osmo-nitb/nokia/openbsc_nokia_3trx.cfg @@ -0,0 +1,117 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver misdn +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + timer t3101 10 + timer t3113 60 + bts 0 + type nokia_site + band GSM1800 + cell_identity 1 + location_area_code 1 + base_station_id_code 63 + training_sequence_code 7 + + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 1 + + trx 0 + arfcn 866 + max_power_red 24 + rsl e1 line 0 timeslot 2 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + e1 line 0 timeslot 6 sub-slot full + timeslot 1 + phys_chan_config SDCCH8 + e1 line 0 timeslot 6 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 6 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 6 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 7 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 7 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 7 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 7 sub-slot 3 + + trx 1 + arfcn 870 + max_power_red 24 + rsl e1 line 0 timeslot 3 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F + e1 line 0 timeslot 8 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 8 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 8 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 8 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 9 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 9 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 9 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 9 sub-slot 3 + + trx 2 + arfcn 874 + max_power_red 24 + rsl e1 line 0 timeslot 4 sub-slot full + rsl e1 tei 3 + timeslot 0 + phys_chan_config TCH/F + e1 line 0 timeslot 10 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + e1 line 0 timeslot 10 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + e1 line 0 timeslot 10 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + e1 line 0 timeslot 10 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + e1 line 0 timeslot 11 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + e1 line 0 timeslot 11 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + e1 line 0 timeslot 11 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + e1 line 0 timeslot 11 sub-slot 3 diff --git a/doc/examples/osmo-nitb/rbs2308/openbsc.cfg b/doc/examples/osmo-nitb/rbs2308/openbsc.cfg new file mode 100644 index 000000000..0226920e1 --- /dev/null +++ b/doc/examples/osmo-nitb/rbs2308/openbsc.cfg @@ -0,0 +1,220 @@ +! +! OpenBSC (0.9.11.308-62d46) configuration saved from vty +!! +password foo +! +line vty + no login +! +network + network country code 262 + mobile network code 42 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 0 + paging any use tch 0 + rrlp mode none + mm info 0 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3122 0 + timer t3141 0 + subscriber-keep-in-ram 0 + bts 0 + type rbs2000 + band GSM900 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator descending + rach tx integer 9 + rach max transmission 7 + oml e1 line 0 timeslot 1 sub-slot full + oml e1 tei 62 + neighbor-list mode automatic + gprs mode none + is-connection-list add 4 512 12 + is-connection-list add 16 524 12 + is-connection-list add 28 536 12 + is-connection-list add 40 548 12 + trx 0 + rf_locked 0 + arfcn 55 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 1 sub-slot full + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + hopping enabled 0 + e1 line 0 timeslot 1 sub-slot full + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 2 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 3 sub-slot 3 + trx 1 + rf_locked 0 + arfcn 57 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 4 sub-slot full + rsl e1 tei 1 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 5 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 5 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 5 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 5 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 6 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 6 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 6 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 6 sub-slot 3 + trx 2 + rf_locked 0 + arfcn 59 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 7 sub-slot full + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 8 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 8 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 8 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 8 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 9 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 9 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 9 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 9 sub-slot 3 + trx 3 + rf_locked 0 + arfcn 61 + nominal power 24 + max_power_red 12 + rsl e1 line 0 timeslot 10 sub-slot full + rsl e1 tei 3 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 11 sub-slot 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 11 sub-slot 1 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 11 sub-slot 2 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 11 sub-slot 3 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 12 sub-slot 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 12 sub-slot 1 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 12 sub-slot 2 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 + e1 line 0 timeslot 12 sub-slot 3 + +e1_input + e1_line 0 driver dahdi diff --git a/doc/examples/osmo-nitb/sysmobts/openbsc.cfg b/doc/examples/osmo-nitb/sysmobts/openbsc.cfg new file mode 100644 index 000000000..7c078f63d --- /dev/null +++ b/doc/examples/osmo-nitb/sysmobts/openbsc.cfg @@ -0,0 +1,77 @@ +! +! OpenBSC configuration saved from vty +! ! +password foo +! +line vty + no login +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OpenBSC + long name OpenBSC + auth policy closed + location updating reject cause 13 + encryption a5 0 + neci 1 + rrlp mode none + mm info 1 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3101 10 + timer t3103 0 + timer t3105 0 + timer t3107 0 + timer t3109 4 + timer t3111 0 + timer t3113 60 + timer t3115 0 + timer t3117 0 + timer t3119 0 + timer t3141 0 + bts 0 + type sysmobts + band DCS1800 + cell_identity 0 + location_area_code 1 + training_sequence_code 7 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + ip.access unit_id 1801 0 + oml ip.access stream_id 255 line 0 + gprs mode none + trx 0 + rf_locked 0 + arfcn 514 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + timeslot 1 + phys_chan_config SDCCH8 + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/F + timeslot 6 + phys_chan_config TCH/F + timeslot 7 + phys_chan_config TCH/F |