diff options
| -rw-r--r-- | tests/Makefile.am | 31 | ||||
| -rw-r--r-- | tests/test_nodes.vty | 61 |
2 files changed, 88 insertions, 4 deletions
diff --git a/tests/Makefile.am b/tests/Makefile.am index 035cfb010..6c392af9c 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -33,6 +33,7 @@ EXTRA_DIST = \ $(TESTSUITE) \ vty_test_runner.py \ ctrl_test_runner.py \ + test_nodes.vty \ $(NULL) TESTSUITE = $(srcdir)/testsuite @@ -43,15 +44,37 @@ DISTCLEANFILES = \ if ENABLE_EXT_TESTS python-tests: $(BUILT_SOURCES) + $(MAKE) vty-test + $(MAKE) ctrl-python-test +else +python-tests: $(BUILT_SOURCES) + echo "Not running python-based tests (determined at configure-time)" +endif + +vty-python-test: $(BUILT_SOURCES) osmotestvty.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v osmotestconfig.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v $(srcdir)/vty_test_runner.py -w $(abs_top_builddir) -v + rm -f $(top_builddir)/sms.db $(top_builddir)/gsn_restart $(top_builddir)/gtphub_restart_count + +# To update the VTY script from current application behavior, +# pass -u to vty_script_runner.py by doing: +# make vty-transcript-test U=-u +vty-transcript-test: + osmo_verify_transcript_vty.py -v \ + -n OsmoSGSN -p 4245 \ + -r "$(top_builddir)/src/gprs/osmo-sgsn -c $(top_srcdir)/doc/examples/osmo-sgsn/osmo-sgsn.cfg" \ + $(U) $${T:-$(srcdir)/*.vty} + rm -f $(builddir)/sms.db $(builddir)/gsn_restart + +# don't run multiple tests concurrently so that the ports don't conflict +vty-test: + $(MAKE) vty-python-test + $(MAKE) vty-transcript-test + +ctrl-python-test: $(BUILT_SOURCES) $(srcdir)/ctrl_test_runner.py -w $(abs_top_builddir) -v rm -f $(top_builddir)/sms.db $(top_builddir)/gsn_restart $(top_builddir)/gtphub_restart_count -else -python-tests: $(BUILT_SOURCES) - echo "Not running python-based tests (determined at configure-time)" -endif check-local: atconfig $(TESTSUITE) $(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS) diff --git a/tests/test_nodes.vty b/tests/test_nodes.vty new file mode 100644 index 000000000..630094fda --- /dev/null +++ b/tests/test_nodes.vty @@ -0,0 +1,61 @@ +OsmoSGSN> enable +OsmoSGSN# show timer +T3312 = 600 s Periodic RA Update timer (s) (default: 600 s) +T3313 = 30 s Waiting for paging response timer (s) (default: 30 s) +T3314 = 44 s Force to STANDBY on expiry timer (s) (default: 44 s) +T3316 = 44 s AA-Ready timer (s) (default: 44 s) +T3322 = 6 s Detach request -> accept timer (s) (default: 6 s) +T3350 = 6 s Waiting for ATT/RAU/TMSI_COMPL timer (s) (default: 6 s) +T3360 = 6 s Waiting for AUTH/CIPH response timer (s) (default: 6 s) +T3370 = 6 s Waiting for IDENTITY response timer (s) (default: 6 s) +T3385 = 8 s Wait for ACT PDP CTX REQ timer (s) (default: 8 s) +T3386 = 8 s Wait for MODIFY PDP CTX ACK timer (s) (default: 8 s) +T3395 = 8 s Wait for DEACT PDP CTX ACK timer (s) (default: 8 s) +T3397 = 8 s Wait for DEACT AA PDP CTX ACK timer (s) (default: 8 s) +OsmoSGSN# configure terminal +OsmoSGSN(config)# list +... + sgsn + ctrl +... + ns + bssgp +... + +OsmoSGSN(config)# sgsn +OsmoSGSN(config-sgsn)# list +... + gtp local-ip A.B.C.D + ggsn <0-255> remote-ip A.B.C.D + ggsn <0-255> gtp-version (0|1) + ggsn <0-255> echo-interval <1-36000> + ggsn <0-255> no echo-interval + imsi-acl (add|del) IMSI + auth-policy (accept-all|closed|acl-only|remote) + authentication (optional|required) + encryption (GEA0|GEA1|GEA2|GEA3|GEA4) + gsup ipa-name NAME + gsup remote-ip A.B.C.D + gsup remote-port <0-65535> + gsup oap-id <0-65535> + gsup oap-k K + gsup oap-opc OPC + apn APNAME ggsn <0-255> + apn APNAME imsi-prefix IMSIPRE ggsn <0-255> + access-point-name NAME + no access-point-name NAME + cdr filename NAME + no cdr filename + cdr trap + no cdr trap + cdr interval <1-2147483647> + ggsn dynamic + grx-dns-add A.B.C.D + timer [TNNNN] [(<0-2147483647>|default)] + no compression rfc1144 + compression rfc1144 active slots <1-256> + compression rfc1144 passive + no compression v42bis + compression v42bis active direction (ms|sgsn|both) codewords <512-65535> strlen <6-250> + compression v42bis passive +... |