diff options
author | Holger Hans Peter Freyther <zecke@selfish.org> | 2010-04-09 12:26:32 +0200 |
---|---|---|
committer | Holger Hans Peter Freyther <zecke@selfish.org> | 2010-04-09 12:26:32 +0200 |
commit | 25cb84be128ad1d7f9ccf09286d8eaa09dbd2c2c (patch) | |
tree | 421958d57ce0b36ac844be2bd82fc854c7acd641 /openbsc/src/abis_rsl.c | |
parent | d9ae25c1bfa15a29d3fba5fc20bb96757e31a0fb (diff) |
[rsl] Introduce an error state for the lchan and set it on release
When we issue a RF Channel Release in case of a failure we receive
RLL release indications after the channel was tearn down and we
issue another RF Channel Release as a result. The channel allocator
might have already allocated this channel and we release the channel
again with another MS on it.
Make rsl_rf_chan_release take an error argument and make it set
a new state in case of an error and change the RF Channel Release
ack to not set the state back to none in case of an error but wait
for a timeout that is a bit higher than T3111.
I tested this with removing the battery during a phonecall and
waiting for the channel failure. With this test we only send the
release once.
Diffstat (limited to 'openbsc/src/abis_rsl.c')
-rw-r--r-- | openbsc/src/abis_rsl.c | 54 |
1 files changed, 45 insertions, 9 deletions
diff --git a/openbsc/src/abis_rsl.c b/openbsc/src/abis_rsl.c index e73a1db4d..b1816bdd3 100644 --- a/openbsc/src/abis_rsl.c +++ b/openbsc/src/abis_rsl.c @@ -568,12 +568,33 @@ int rsl_deact_sacch(struct gsm_lchan *lchan) return abis_rsl_sendmsg(msg); } +static void error_timeout_cb(void *data) +{ + struct gsm_lchan *lchan = data; + if (lchan->state != LCHAN_S_REL_ERR) { + LOGP(DRSL, LOGL_ERROR, "%s error timeout but not in error state: %d\n", + gsm_lchan_name(lchan), lchan->state); + return; + } + + /* go back to the none state */ + LOGP(DRSL, LOGL_NOTICE, "%s is back in operation.\n", gsm_lchan_name(lchan)); + lchan->state = LCHAN_S_NONE; +} + /* Chapter 8.4.14 / 4.7: Tell BTS to release the radio channel */ -int rsl_rf_chan_release(struct gsm_lchan *lchan) +static int rsl_rf_chan_release(struct gsm_lchan *lchan, int error) { struct abis_rsl_dchan_hdr *dh; - struct msgb *msg = rsl_msgb_alloc(); + struct msgb *msg; + + if (lchan->state == LCHAN_S_REL_ERR) { + LOGP(DRSL, LOGL_NOTICE, "%s is in error state not sending release.\n", + gsm_lchan_name(lchan)); + return -1; + } + msg = rsl_msgb_alloc(); dh = (struct abis_rsl_dchan_hdr *) msgb_put(msg, sizeof(*dh)); init_dchan_hdr(dh, RSL_MT_RF_CHAN_REL); dh->chan_nr = lchan2chan_nr(lchan); @@ -581,7 +602,20 @@ int rsl_rf_chan_release(struct gsm_lchan *lchan) msg->lchan = lchan; msg->trx = lchan->ts->trx; - DEBUGP(DRSL, "%s RF Channel Release CMD\n", gsm_lchan_name(lchan)); + DEBUGP(DRSL, "%s RF Channel Release CMD due error %d\n", gsm_lchan_name(lchan), error); + + if (error) { + /* + * the nanoBTS sends RLL release indications after the channel release. This can + * be a problem when we have reassigned the channel to someone else and then can + * not figure out who used this channel. + */ + lchan->state = LCHAN_S_REL_ERR; + lchan->error_timer.data = lchan; + lchan->error_timer.cb = error_timeout_cb; + bsc_schedule_timer(&lchan->error_timer, + msg->trx->bts->network->T3111 + 2, 0); + } /* BTS will respond by RF CHAN REL ACK */ return abis_rsl_sendmsg(msg); @@ -806,7 +840,7 @@ static int rsl_rx_conn_fail(struct msgb *msg) LOGPC(DRSL, LOGL_NOTICE, "\n"); /* FIXME: only free it after channel release ACK */ - return rsl_rf_chan_release(msg->lchan); + return rsl_rf_chan_release(msg->lchan, 1); } static void print_meas_rep_uni(struct gsm_meas_rep_unidir *mru, @@ -978,12 +1012,14 @@ static int abis_rsl_rx_dchan(struct msgb *msg) break; case RSL_MT_RF_CHAN_REL_ACK: DEBUGP(DRSL, "%s RF CHANNEL RELEASE ACK\n", ts_name); - if (msg->lchan->state != LCHAN_S_REL_REQ) + if (msg->lchan->state != LCHAN_S_REL_REQ && msg->lchan->state != LCHAN_S_REL_ERR) LOGP(DRSL, LOGL_NOTICE, "%s CHAN REL ACK but state %s\n", gsm_lchan_name(msg->lchan), gsm_lchans_name(msg->lchan->state)); bsc_del_timer(&msg->lchan->T3111); - msg->lchan->state = LCHAN_S_NONE; + /* we have an error timer pending to release that */ + if (msg->lchan->state != LCHAN_S_REL_ERR) + msg->lchan->state = LCHAN_S_NONE; lchan_free(msg->lchan); break; case RSL_MT_MODE_MODIFY_ACK: @@ -1075,7 +1111,7 @@ static void t3101_expired(void *data) { struct gsm_lchan *lchan = data; - rsl_rf_chan_release(lchan); + rsl_rf_chan_release(lchan, 1); } /* If T3111 expires, we will send the RF Channel Request */ @@ -1083,7 +1119,7 @@ static void t3111_expired(void *data) { struct gsm_lchan *lchan = data; - rsl_rf_chan_release(lchan); + rsl_rf_chan_release(lchan, 0); } /* MS has requested a channel on the RACH */ @@ -1251,7 +1287,7 @@ static int rsl_rx_rll_err_ind(struct msgb *msg) rll_indication(msg->lchan, rllh->link_id, BSC_RLLR_IND_ERR_IND); if (rlm_cause[1] == RLL_CAUSE_T200_EXPIRED) - return rsl_rf_chan_release(msg->lchan); + return rsl_rf_chan_release(msg->lchan, 1); return 0; } |