diff options
author | Pau Espin Pedrol <pespin@sysmocom.de> | 2020-08-18 13:46:17 +0200 |
---|---|---|
committer | Pau Espin Pedrol <pespin@sysmocom.de> | 2020-08-18 13:46:17 +0200 |
commit | b32936d8231a73bd6565d00db44961b0243a3ca8 (patch) | |
tree | b08ce31990cb6bdc585ed2ede0634224436893ec /doc | |
parent | d5dc1430012857f7063e86a00f8662d658fe1c81 (diff) |
doc: Update VTY reference xml file
Change-Id: I787bbc254ef10766fe8d480ffd93a16d9926a50e
Diffstat (limited to 'doc')
-rw-r--r-- | doc/manuals/vty/sgsn_vty_reference.xml | 275 |
1 files changed, 188 insertions, 87 deletions
diff --git a/doc/manuals/vty/sgsn_vty_reference.xml b/doc/manuals/vty/sgsn_vty_reference.xml index 38e21c2f1..e49d27839 100644 --- a/doc/manuals/vty/sgsn_vty_reference.xml +++ b/doc/manuals/vty/sgsn_vty_reference.xml @@ -18,10 +18,11 @@ <param name='terminal' doc='Write to terminal' /> </params> </command> - <command id='write file'> + <command id='write file [PATH]'> <params> <param name='write' doc='Write running configuration to memory, network, or terminal' /> <param name='file' doc='Write to configuration file' /> + <param name='[PATH]' doc='Set file path to store the config, or replace if already exists' /> </params> </command> <command id='write memory'> @@ -187,7 +188,7 @@ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> - <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> + <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|gtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> @@ -204,6 +205,7 @@ <param name='ranap' doc='RAN Application Part (RANAP)' /> <param name='sua' doc='SCCP User Adaptation (SUA)' /> <param name='v42bis' doc='V.42bis data compression (SNDCP)' /> + <param name='gtp' doc='GPRS Tunnelling Protocol (GTP)' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -262,6 +264,50 @@ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> </params> </command> + <command id='logp (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|gtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> + <params> + <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' /> + <param name='ranap' doc='RAN Application Part (RANAP)' /> + <param name='sua' doc='SCCP User Adaptation (SUA)' /> + <param name='v42bis' doc='V.42bis data compression (SNDCP)' /> + <param name='gtp' doc='GPRS Tunnelling Protocol (GTP)' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='lrspro' doc='Remote SIM protocol' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -378,6 +424,13 @@ <param name='cache' doc='Display contents of subscriber cache' /> </params> </command> + <command id='show timer [TNNNN]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='timer' doc='Show timers' /> + <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> + </params> + </command> <command id='show cs7 instance <0-15> users'> <params> <param name='show' doc='Show running system information' /> @@ -397,6 +450,13 @@ <param name='[<0-65534>]' doc='Port Number' /> </params> </command> + <command id='show cs7 config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='config' doc='Currently running cs7 configuration' /> + </params> + </command> <command id='show cs7 instance <0-15> asp'> <params> <param name='show' doc='Show running system information' /> @@ -734,7 +794,7 @@ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> </params> </command> - <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> + <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|gtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> @@ -751,6 +811,7 @@ <param name='ranap' doc='RAN Application Part (RANAP)' /> <param name='sua' doc='SCCP User Adaptation (SUA)' /> <param name='v42bis' doc='V.42bis data compression (SNDCP)' /> + <param name='gtp' doc='GPRS Tunnelling Protocol (GTP)' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -809,6 +870,50 @@ <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> </params> </command> + <command id='logp (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|gtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'> + <params> + <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' /> + <param name='mm' doc='Layer3 Mobility Management (MM)' /> + <param name='pag' doc='Paging Subsystem' /> + <param name='meas' doc='Radio Measurement Processing' /> + <param name='ref' doc='Reference Counting' /> + <param name='gprs' doc='GPRS Packet Service' /> + <param name='ns' doc='GPRS Network Service (NS)' /> + <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> + <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> + <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> + <param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' /> + <param name='ranap' doc='RAN Application Part (RANAP)' /> + <param name='sua' doc='SCCP User Adaptation (SUA)' /> + <param name='v42bis' doc='V.42bis data compression (SNDCP)' /> + <param name='gtp' doc='GPRS Tunnelling Protocol (GTP)' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='lrspro' doc='Remote SIM protocol' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' /> + </params> + </command> <command id='show logging vty'> <params> <param name='show' doc='Show running system information' /> @@ -888,6 +993,18 @@ <param name='rate-counters' doc='Show all rate counters' /> </params> </command> + <command id='stats report'> + <params> + <param name='stats' doc='Stats related commands' /> + <param name='report' doc='Manurally trigger reporting of stats' /> + </params> + </command> + <command id='stats reset'> + <params> + <param name='stats' doc='Stats related commands' /> + <param name='reset' doc='Reset all stats' /> + </params> + </command> <command id='show sgsn'> <params> <param name='show' doc='Show running system information' /> @@ -925,6 +1042,13 @@ <param name='cache' doc='Display contents of subscriber cache' /> </params> </command> + <command id='show timer [TNNNN]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='timer' doc='Show timers' /> + <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> + </params> + </command> <command id='update-subscriber imsi IMSI insert auth-triplet <1-5> sres SRES rand RAND kc KC'> <params> <param name='update-subscriber' doc='Update subscriber list' /> @@ -1008,6 +1132,13 @@ <param name='[<0-65534>]' doc='Port Number' /> </params> </command> + <command id='show cs7 config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='config' doc='Currently running cs7 configuration' /> + </params> + </command> <command id='show cs7 instance <0-15> asp'> <params> <param name='show' doc='Show running system information' /> @@ -1412,11 +1543,11 @@ <param name='log' doc='Report to the logger' /> </params> </command> - <command id='stats interval <1-65535>'> + <command id='stats interval <0-65535>'> <params> <param name='stats' doc='Configure stats sub-system' /> <param name='interval' doc='Set the reporting interval' /> - <param name='<1-65535>' doc='Interval in seconds' /> + <param name='<0-65535>' doc='Interval in seconds (0 disables the reporting interval)' /> </params> </command> <command id='sgsn'> @@ -1521,7 +1652,7 @@ <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> </params> </command> - <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> + <command id='logging level (|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|gtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> <params> <param name='logging' doc='Configure logging' /> <param name='level' doc='Set the log level for a specified category' /> @@ -1538,6 +1669,7 @@ <param name='ranap' doc='RAN Application Part (RANAP)' /> <param name='sua' doc='SCCP User Adaptation (SUA)' /> <param name='v42bis' doc='V.42bis data compression (SNDCP)' /> + <param name='gtp' doc='GPRS Tunnelling Protocol (GTP)' /> <param name='lglobal' doc='Library-internal global log family' /> <param name='llapd' doc='LAPD in libosmogsm' /> <param name='linp' doc='A-bis Intput Subsystem' /> @@ -1686,6 +1818,12 @@ <param name='disable' doc='Disable the reporter' /> </params> </command> + <command id='flush-period <0-65535>'> + <params> + <param name='flush-period' doc='Configure stats sub-system' /> + <param name='<0-65535>' doc='Send all stats even if they have not changed (i.e. force the flush)every N-th reporting interval. Set to 0 to disable regular flush (default).' /> + </params> + </command> </node> <node id='config-line'> <name>config-line</name> @@ -1805,6 +1943,15 @@ <param name='<0-255>' doc='DSCP Value' /> </params> </command> + <command id='encapsulation udp use-reset-block-unblock (enabled|disabled)'> + <params> + <param name='encapsulation' doc='NS encapsulation options' /> + <param name='udp' doc='NS over UDP Encapsulation' /> + <param name='use-reset-block-unblock' doc='Use NS-{RESET,BLOCK,UNBLOCK} procedures in violation of 3GPP TS 48.016' /> + <param name='enabled' doc='Enable NS-{RESET,BLOCK,UNBLOCK}' /> + <param name='disabled' doc='Disable NS-{RESET,BLOCK,UNBLOCK}' /> + </params> + </command> <command id='encapsulation framerelay-gre enabled (1|0)'> <params> <param name='encapsulation' doc='NS encapsulation options' /> @@ -1984,6 +2131,12 @@ <param name='override' doc='Override' /> </params> </command> + <command id='no traffic-mode'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='traffic-mode' doc='Remove explicit traffic mode of operation of this AS' /> + </params> + </command> <command id='recovery-timeout <1-2000>'> <params> <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' /> @@ -2054,6 +2207,15 @@ <param name='PC' doc='Override Destination Point Code' /> </params> </command> + <command id='point-code override patch-sccp (disabled|both)'> + <params> + <param name='point-code' doc='Point Code Specific Features' /> + <param name='override' doc='Override (force) a point-code to hard-coded value' /> + <param name='patch-sccp' doc='Patch point code values into SCCP called/calling address' /> + <param name='disabled' doc='Don't patch any point codes into SCCP called/calling address' /> + <param name='both' doc='Patch both origin and destination point codes into SCCP called/calling address' /> + </params> + </command> </node> <node id='config-cs7-asp'> <name>config-cs7-asp</name> @@ -2081,6 +2243,21 @@ <param name='<0-255>' doc='QoS Class of ASP' /> </params> </command> + <command id='role (sg|asp|ipsp)'> + <params> + <param name='role' doc='Specify the xUA role for this ASP' /> + <param name='sg' doc='SG (Signaling Gateway)' /> + <param name='asp' doc='ASP (Application Server Process)' /> + <param name='ipsp' doc='IPSP (IP Signalling Point)' /> + </params> + </command> + <command id='sctp-role (client|server)'> + <params> + <param name='sctp-role' doc='Specify the SCTP role for this ASP' /> + <param name='client' doc='Operate as SCTP client; connect to a server' /> + <param name='server' doc='Operate as SCTP server; wait for client connections' /> + </params> + </command> <command id='block'> <params> <param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' /> @@ -2366,88 +2543,12 @@ <param name='A.B.C.D' doc='IPv4 address' /> </params> </command> - <command id='timer t3312 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3312' doc='Periodic RA Update timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3322 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3322' doc='Detach request -> accept timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3350 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3350' doc='Waiting for ATT/RAU/TMSI_COMPL timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3360 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3360' doc='Waiting for AUTH/CIPH response timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3370 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3370' doc='Waiting for IDENTITY response timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3313 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3313' doc='Waiting for paging response timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3314 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3314' doc='Force to STANDBY on expiry timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3316 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3316' doc='AA-Ready timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3385 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3385' doc='Wait for ACT PDP CTX REQ timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3386 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3386' doc='Wait for MODIFY PDP CTX ACK timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3395 <0-65535>'> - <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3395' doc='Wait for DEACT PDP CTX ACK timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> - </params> - </command> - <command id='timer t3397 <0-65535>'> + <command id='timer [TNNNN] [(<0-2147483647>|default)]'> <params> - <param name='timer' doc='Configure GPRS Timers' /> - <param name='t3397' doc='Wait for DEACT AA PDP CTX ACK timer (s)' /> - <param name='<0-65535>' doc='Timer Value in seconds' /> + <param name='timer' doc='Configure or show timers' /> + <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> + <param name='[<0-2147483647>]' doc='New timer value' /> + <param name='[default]' doc='Set to default timer value' /> </params> </command> <command id='no compression rfc1144'> |