Age | Commit message (Collapse) | Author | Files | Lines |
|
Earlier there was no handling for recalculation of DL window
size during tbf update. Which has been fixed in this patch.
Related: OS#1808
Change-Id: I41aa807068520460fd665a55e3529e60f6bbb630
|
|
Release 7
row 4 of Table 10.4.14a.1 of Spec 44.060 version 7.27.0 Release 7. Says
"The previous RLC data block contains a Upper Layer PDU, or a part of it,
that fills precisely the previous data block and for which there is no
length indicator in that RLC data block.
The current RLC data block contains a Upper Layer PDU that either fills
the current RLC data block precisely or continues in the next RLC data block."
So when we receive block with 1st LI: value=0 and Value of E bit in the
same octet as 1, we expect 2 chunks with 1st chunk as length as 0 and complete
and 2nd chunk as length non zero. But with this bug we see only 1 chunk causing
incorrect assembling
This issue has been fixed in this patch.
Related: OS#1811
Change-Id: I2cd0fca3ed28a553ede3f4b8a7d3267284dd2c9b
|
|
This patch adds a test case test_tbf_li_decoding which
expects a current bug with LI decoding for row 4 of Table 10.4.14a.1
in 44.060 version 7.27.0 Release 7.
The test's expectation is corrected along with the bug
fix in a subsequent commit
Related: OS#1811
Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
|
|
This patch adds a test case test_2_consecutive_dl_tbfs which
expects a current bug with TS allocation for 2nd DL TBF.
The test's expectation is corrected along with the bug fix in a
subsequent commit
Related: OS#1792
Change-Id: I890e4fbb2b64037e051433e70082a197e2a929a6
|
|
Fix attempted read past vector boundaries in case of a starting bit offset !=
0, so that the last amount of bits read should be < 8. In the case of
CSN_LEFT_ALIGNED_VAR_BMP, the mod-8 calculation was flawed, and in the final
step, 8 bits were read instead of the remainder < 8. This lead to -EINVAL being
returned by bitvec_get_bit_pos() and bogus resulting data.
Instead, read 8 bits only as long as at least 8 bits remain, and read any
remaining bits < 8 in a final step. Drop unneeded nB1 variable and an obvious
comment.
Adjust the unit test assertion in testCsnLeftAlignedVarBmpBounds() in
RLCMACTest.cpp.
Based on a fix by Aravind Sirsikar <Arvind.Sirsikar@radisys.com>, but
implemented differently.
Related: OS#1805
Change-Id: I490498c8da6b531f54acb673379379f7b10907c0
|
|
CSN1 decoding currently contains an attempted read past vector boundaries in
case of a starting bit offset != 0, so that the last amount of bits read should
be < 8. In the case of CSN_LEFT_ALIGNED_VAR_BMP, the mod-8 calculation is
flawed, and in what should be the final step of reading n < 8 bits, 8 bits are
read instead of n (with an extraneous read of n bits following after that).
This leads to -EINVAL being returned by bitvec_get_bit_pos() and bogus
resulting data.
Add testCsnLeftAlignedVarBmpBounds() in RLCMACTest.cpp to show and expect this
bug. The test's expectation shall be corrected along with the bug fix in a
subsequent commit.
Related: OS#1805
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: I4641f5d1d49f66cb1a5cd813befb3a2a266001b0
|
|
The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2
"Fix Timing Advance handling": between patch build checking and patch
submission, a new section was added to TbfTest.cpp which also needs adjustment.
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
|
|
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
|
|
Earlier there was an incorrect encoding of BSN status in GPRS PUAN message.
This was a bottle neck for GPRS performance testing for UL. Which has been fixed
in this patch.
Related: OS#1806
Change-Id: I98e586aa5cb9200cf03e092556304211d4d459aa
|
|
This patch adds a test case which expects a current bug with
GPRS PUAN encoding. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1806
Change-Id: Ied0f1dd3037d8fac6a772f4e097defb72634f955
|
|
This patch adds a test case test_tbf_update_ws. Which expects a
current bug with DL window size calculation. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1808
Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
|
|
Change-Id: I89638ba908e7d9964a5525061ce0cf26049be438
|
|
Interface structure between osmo-bts and osmo-pcu is updated with
the parameters to differentiate the type of RACH and further
support 11 bit RACH. The function prototype and definitions are
changed accordingly. Interface version number is increased.
Change-Id: I265c2d92d36d6cbcbeee60cdd8407dafe1da06a4
|
|
Earlier there was an incorrect encoding of PUAN when VQ is not equal
VR case for EGPRS UL RLC window. The PCU was encoding the same PUAN
message always irrespective of radio condition. This was a bottle neck
for performance testing. Which has been fixed in this patch.
Related: OS#1793
unit test assertion in the previous commit is fixed in this patch.
Change-Id: Iba7b1995028bd81749ffb080616b2ad5f2540d57
|
|
This patch adds a test case which expects a current bug with EGPRS PUAN
encoding when VQ != VR. The test's expectation is corrected along with
the bugfix in a subsequent commit
Adds test_tbf_puan_urbb_len to describe the following bug:
EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN
messages regardless of the urbb_len.
Related: OS#1793
Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
|
|
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
|
|
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
|
|
ARFCN is already part of TRX struct so there's no need to supply it
explicitly in a separate parameter. I've tested and those are the same
anyway.
Change-Id: I8e975c52cbc819427880093b1e5371fe1f8ce460
|
|
EGPRS Type 1, 2, and 3 headers are used by OsmoPCU and OsmoBTS.
Move the header definitions to libosmocore to be shared by both
packages.
Modify the struct variable naming to use *_hi/*_lo instead of
*_a/*_b in order to be consistent with existing naming used in
libosmocore.
Change-Id: I98687ad981d27502aec42729611937ba1caf207c
|
|
During MCS upgradation such as MCS6->MCS9, 2 blocks which
were sent separately as MCS6, will be clubbed into one MCS9
block during retransmission. Same holds good for
MCS5->MCS7 transistion. During MCS reduction such as
MCS9->MCS6,2 blocks which were sent together will be
sent separately during the retransmission case.
Same is verified through the generated log file. Currently
MCS8->MCS6 transition is not supported. The retransmission
MCS is being calculated from Table 8.1.1.2 of TS 44.060.
The same test cases are also integration tested on Nuran
1.0 platform.
Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
|
|
Modify the DL TBF flow to support ARQ-II EGPRS DL retransmission
Change-Id: I7a845c98f2018795f0f62240f228411b0bc030c7
|
|
Update test suite with test cases for Header type 1 in EGPRS UL
Change-Id: I21811bb126dbe151b0708a964d3143bc2fd52389
Reviewed-on: https://gerrit.osmocom.org/272
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
|
|
Updates the test suite to add test cases for Header type 2 parsing
in EGPRS UL.
Change-Id: I1dd46010065a6d6da21e8e45af71e6d5f649b0b0
Reviewed-on: https://gerrit.osmocom.org/271
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
It makes no sense to call functions on null pointer object. Use
the name of the old tbf.
Change-Id: I93b8c07a0b2de40a11e94fd6c212897cbe3b50ef
Reviewed-on: https://gerrit.osmocom.org/212
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
argument
Require to count statistics for rlc_dl_payload_bytes.
Change-Id: I0e622acb1f13f7489946baf049de4ba1cde6a1fc
Reviewed-on: https://gerrit.osmocom.org/142
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
Adds support to find the puncturing scheme for retransmission
with MCS change, retransmission with no MCS change, transmission
case. Puncturing scheme selection for retransmission case with
MCS change is aligned with TS 44.060 9.3.2.1. Puncturing scheme
selection for retransmission without MCS change, fresh transmission
is aligned with TS 44.060 10.4.8a.3.1, 10.4.8a.2.1, 10.4.8a.1.1
|
|
The remaining_bits_len is correctly decremented while encoding
CSN_RECURSIVE_ARRAY for fixing the bug.
Details of the bug is in https://projects.osmocom.org/issues/1641
During introduction of basic EGPRS feature new hex dump message
PUASS, from a different working network log was used in Unit test.
It exposed the issue of incorrect handling of recursive array
encoding in osmo-pcu.
Fixes: OS#1641
|
|
This patch is the test suite modification for the fix encoding of
padding bits. New test vectors have been added both in downlink
and uplink.
|
|
This patch is for fixing encoding of padding bits according to the
3gpp spec 44.060 section 11, wherein it shall always start with 0
bit followed with spare padding bits.
During introduction of basic EGPRS feature new hex dump messages
from a different working network log were used in Unit test. These
exposed the issue of incorrect handling of padding bits encoding
in osmo-pcu.
Corrections in the existing test vector of rlcmac is also updated.
In testsuite tbf appropriate corrections for the Tbftest.err is
also done.
|
|
This test will check that we exhaust the available TFIs, so the last
TFI is -16 and then we try to store to that address. It is surprising
that it worked!
|
|
Currently single BSN blocks of size 68 (a single unit from MCS-8)
are put into a MCS-6 block with padding according to TS 44.060
Annex J. Unfortunately, these packets are ignored by the E71. This
might be related to the currently incorrect usage of the puncturing
schemes and the RSB bit (the puncturing schemes are not updated and
the RBS flag is never set).
Avoid downgrading from MCS-8 to MCS-6 if there is no second block
available. Send the block twice instead.
Sponsored-by: On-Waves ehf
|
|
Currently only one BSN block is encoded in each RLC data message,
even if MSC7-9 are used, which transport two independant (except for a
max BSN delta of 512) BSN blocks. In that case, the same block is
just put twice into the same message.
The current create_dl_acked_block(fn, ts) method handles
block selection (resend, new BSN, dummy block, ...) and restart
handling in one method and is too complex to extend it accordingly.
Therefore this commit move the block selection/creation handling into
a new method (take_next_bsn) which delivers the next BSN along with a
hint, whether it may be combined with another block. In that case,
the function can be called a second time (this time with a valid
previous BSN, that's the one returned by the first call) to get the
second BSN. The real block generation method
create_dl_acked_block(fn, ts, index, index2) is then called with both
BSNs as indices (the second must be -1, if there is only one BSN).
Note that every BSN returned by take_next_bsn should be passed to
create_dl_acked_block to avoid state inconsistencies.
Sponsored-by: On-Waves ehf
|
|
Currently the method is hard-coded to support a single BSN only.
MCS-7 to MCS-9 encode 2 data blocks into a single RLC data message.
This commit refactors create_dl_acked_block to process any number
of blocks internally.
Note that this does not extend the parameter list accordingly and
just duplicates the BSN if these MCS are being used.
Sponsored-by: On-Waves ehf
|
|
Add a test for EGPRS two phase access based on RA caps.
Add a test for DL TBFs where data block are encoded with each MCS.
Sponsored-by: On-Waves ehf
|
|
The offsets of the data areas change when padding is used (see TS
44.060, 9.3.2.1 and Annex J for details).
Extend the parameter lists to pass the with_padding flag and use
that information to compute the correct offsets.
Sponsored-by: On-Waves ehf
|
|
Return the amount of optional padding bits, which is 6*8 for
MCS-3 and MCS-6 and 0 for all other coding schemes. The padding
is needed the encode 68 byte data blocks (MCS-8) with these schemes.
See TS 44.060, 9.3.2.1 and Annex J for details.
Sponsored-by: On-Waves ehf
|
|
Add family handling and the related methods family,
isFamilyCompatible, isCombinable, decToSingleBlock to
GprsCodingScheme.
Sponsored-by: On-Waves ehf
|
|
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
|
|
The EGPRS support will need more information to encode the IMMEDIATE
ASSIGMENT. Instead of adding more parameters pass a pointer to the
TBF unless an SBA shall be done (indicated by tbf == NULL). All
values that can be derived from the TBF and are not needed for an SBA
are removed from the parameter list.
Return a negative value on error.
Sponsored-by: On-Waves ehf
|
|
Currently the old TFI is always used as ID when a
PACKET DOWNLINK ASSIGNMENT is generated. This fails
if the old TBF has not been fully assigned yet. The
MS will then ignore the PDA.
This commit changes write_packet_downlink_assignment to accept
an additional parameter old_tfi_is_valid and uses the new TBF's
TLLI instead of the olf TFI if that parameter is set to false.
Sponsored-by: On-Waves ehf
|
|
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
|
|
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
|
|
Currently existing TBF can be reused after an MS has sent a RACH
request. Since the MS can be or most probably is in packet idle mode
in that case, the TBF are no longer usable even if they share the
PDCHs and the control TS with the new one.
There are occasional freezes where the MS does no longer react to
messages sent on the PACCH.
This change aborts all pending TBFs if a new TBF is or has been
established via RACH.
Sponsored-by: On-Waves ehf
|
|
Currently the is a release() function which takes care of
statistics and shutdown of properly finished TBFs, but which
cannot be used for aborted TBFs.
This commit add an abort() method which handles unacked RLC blocks
as lost and doesn't start a release timer. This method will be
invoked by tbf_free() for downlink TBF.
Sponsored-by: On-Waves ehf
|
|
Make use of variables, log them to LOGL_DEBUG, and reduce code
duplication.
This should help to narrow down the cause why snd_dl_ass are not
answered by the MS sometimes.
Sponsored-by: On-Waves ehf
|
|
Currently the values in the BSSGP RA Cap IE are eventually use
overwrite the 'good' values obtained from the MS earlier.
Use the 'good' values when the are present, which is assumed if
at least one of ms->ms_class() or ms->egprs_ms_class() is set.
Sponsored-by: On-Waves ehf
|
|
Currently the window size is fixed to 64 even for EGPRS.
Support dynamic window sizes depending on the number of PDCH. The
WS can be set to b + f * N_PDCH. If the result is not valid according
to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the
next lower valid value (or 64).
The following VTY commands are added (config-pcu node):
window-size <0-1024> set base (b) value and leave f unchanged
window-size <0-1024> <0-256> set base (b) and factor (f)
Sponsored-by: On-Waves ehf
|
|
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
|
|
The bitvec RBB is always valid, even when FINAL_ACK_INDICATION is
set. This is done by the ack/nack decoder function which fake a
bitmap starting with V(A) up to V(S)-1 in that case (see
Decoding::handle_final_ack).
Call gprs_rlcmac_dl_tbf::update_window unconditionally and only use
is_final for logging and TBF state changes in
gprs_rlcmac_dl_tbf::rcvd_dl_ack.
Sponsored-by: On-Waves ehf
|
|
Currently the old fixed 64 bit RBB based implementation is used for
GPRS.
Use the new bitvec based methods instead.
Sponsored-by: On-Waves ehf
|