| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently an existing DL TBF can get lost in the process of
establishing an UL TBF via RACH. This can lead to stalled connections
until the network sends more LLC frames.
This commit adds a check for a non-empty LLC queue after the UL TBF
has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK
path) to eventually establish a new DL TBF on the UL TBF's PACCH.
Sponsored-by: On-Waves ehf
|
|
Currently an existing DL TBF is freed immediately, when a resource
request is received. This makes sense since the MS might have dropped
it when switching to the PDCH signaled via the AGCH for the SBA. But
if the TBF still is assumed to exist on the MS side, there might be
TFI collisions if the old TBF object is not kept to block its TFI
for some time.
This commit changes rcv_resource_request to call release() instead of
tbf_free() on the DL TBF object (if it exists).
Sponsored-by: On-Waves ehf
|
|
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
|
|
This reverts commit e91bd3babd5c04a154f296607b401a5050dcba31.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
|
|
The FN of the data_ind taken from the DSP are monotonic, so latency
does not affect the detection of poll timeouts if these FN are used.
If the FN is larger than a poll_fn value, it can safely be assumed
that the poll response will not arrive later on.
Currently a max_delay of 60 frames is used, which has the drawback
that additional ~250ms will pass until a lost ACK is detected.
Using the data_ind's FN alone breaks the poll timeout detection if
there are no other MS sending data blocks.
This commit adds BTS::set_current_block_frame_number that is called
with the FN taken from data_ind messages. The max_delay is set to 0
which removes the additional delay, when this FN is used to detect
poll timeouts. So the average additional delay decreases with the
number of data_ind per time. The current_frame is updated unless it
seems to have been updated already (assumed if 0 < cur_fn - block_fn
< 500). Thus the time_ind has still priority to update the
current_frame value.
Sponsored-by: On-Waves ehf
|
|
This commit adds the relevant frame number to the "poll timeout"
logging message. In addition, logging is added to the places where
poll_fn gets set.
The goal is to track down the source for frequent "poll timeout"
messages.
Sponsored-by: On-Waves ehf
|
|
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
|
|
This tests the usage of an existing TBF that is no longer in FLOW
state to request a new DL TBF via the old TBF's PACCH.
The test triggers a bug that breaks the association between both TBF
objects, resulting in packet loss and transmission stalling.
Sponsored-by: On-Waves ehf
|
|
Currently the assignment is completed by manipulating the state of
the TBF objects directly by setting the state fields to fixed values.
This way, the PCU's code that is responsible to update the state
accordingly is not tested.
This commit changes this to simulate RLC Control Acknowledgement
messages instead.
Sponsored-by: On-Waves ehf
|
|
The block number can always be deduced from the frame number. The
current test code handles the block number explicitely, which makes
the code more complex and has also led to block number errors cause
by not wrapping the numbers (valid block numbers range from 0 to 11).
This commit changes send_rlc_block to always compute the block number
based on the frame number. It also turns the block_nr into an
optionaly output-only parameter.
Sponsored-by: On-Waves ehf
|
|
Currently the pending LLC packets are lost in some cases when MS
objects are merged, for instance after a RACH when there were 2 MS
object for the same MS (they get merged, when the TLLI is known for
both objects).
This patch modifies GprsMs::merge_old_ms to move all pending LLC
packets (if there are any) to the current MS object.
Sponsored-by: On-Waves ehf
|
|
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
|
|
This adds tests for
- RA update with RACH for the RAUpdateComplete message
- RACH for UL while DL is active (LLC queue not empty)
Sponsored-by: On-Waves ehf
|
|
This commit fixes several issues:
- Set MS class in request
- Set IMSI in establish_ul_tbf_two_phase
- Fake assigment acknowledgement in establish_ul_tbf_two_phase
- Fix TFI bit offset to 1 (was 2)
Sponsored-by: On-Waves ehf
|
|
Currently the functions test_tbf_single_phase and test_tbf_two_phase
do the test logging, BTS intialisation, and the complete message
sequencing on their own. Therefore they cannot be used to test more
complex sequences like TBF reestablishment.
This commit moves the code that does the actual messaging into own
functions. The frame number handling is generalised which also fixes
a block number wrapping error on the way.
Sponsored-by: On-Waves ehf
|
|
Currently the merging of the meta information (MS class, IMSI) takes
place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it
difficult to merge the internal state and does not directly relate to
TBFs anyway.
This commit moves this into a new method GprsMs::merge_old_ms.
Sponsored-by: On-Waves ehf
|
|
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
|
|
Currently when receiving a PACKET DL ACK/NACK message with the Final
Ack Indicator bit set, the TBF's state is set to
GPRS_RLCMAC_WAIT_RELEASE but T3193 is only started when the LLC queue is
empty. Otherwise the reuse_tbf() method is called to establish a new
DL TBF. In that case, the timer is not started. This will leave the
current TBF without a timer so it is potentially not released later
on.
This is recognisable by sticky entries in the output of the
'show tbf all' command and possibly allocation failures if there are
too many of them.
This commit changes the code to always start T3193 to make sure, that
a timer is always active when the the state is set to
GPRS_RLCMAC_WAIT_RELEASE.
Note that TS 44.060, 9.3.2.6 requests to release the 'old' TBF
immediately in some cases, which is not implemented by this change.
This will lead to a longer reservation period of the TFI only, which
is safer than reassigning it too early.
Sponsored-by: On-Waves ehf
|
|
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
|
|
Currently the TFI are managed per TRX, thus only a maximum of 32 TBF
per direction and per TRX are possible simultaneously.
This commit modifies algorithm_a() to allow the sharing of TFI
between different PDCH. Since algorithm A only assigns a single slot
to each TBF, the TFI of each PDCH can be assigned independently.
This increases the maximum to 32 TBF per direction and per PDCH
concerning the TFI allocation.
Ticket: #1793
Sponsored-by: On-Waves ehf
|
|
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
|
|
Currently is is rather expensive to get TFI and USF usage per PDCH,
because the TBFs need to be scanned to get that information.
This commit adds corresponding bit sets which get updated by the
attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class.
Sponsored-by: On-Waves ehf
|
|
Since both TBF are based on the same reservation which means that
they should be compatible with respect to the slot usage, and since
the new TBF has not been forced to single slot usage, an update of
the allocation is not necessary now.
This commit removes the call to update() from within reuse_tbf().
Sponsored-by: On-Waves ehf
|
|
The call to tbf_alloc_dl_tbf misses the pointer to the GprsMs object
which is already known in that case (tbf_reuse). This leads to a full
reallocation of the PDCH slots, which is possibly incompatible with
the old set of slots. This can result in hanging TCP connections and
TCP connection failures.
This commit replaces the old NULL value by the actual GprsMs object.
Since the set_ms() is also done within the tbf_alloc_dl_tbf method,
that call is removed.
Sponsored-by: On-Waves ehf
|
|
Currently algorithm A bases its time slots selection on the number of
TBF actively using the PDCHs. This statistically prefers the first
time slots, especially with short living TBFs. So when the first TBF
is triggered by an uplink transfer (which generally results in a
short-lived TBF) the potentially longer living DL TBF will be bound
to the same slot. When another MS then requests an uplink TBF, it
will get the same slot (no UL TBF currently active).
This commit changes the algorithm to base its selection on reserved
slots instead.
Sponsored-by: On-Waves ehf
|
|
Currently only the first enabled PDCH will be used. Beside the
throughput this will also limit the number of TBFs:
- number of UL TBFs <= 7
- number of DL TBFs <= 32
This commit changes the allocation algorithm to use the PDCH with the
least number of attached TBFs. This will improve the troughput in
both directions and the UL limits:
- number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs
Ticket: #1794
Sponsored-by: On-Waves ehf
|
|
Currently the PDCH object do not know anything about the TBFs using
them. To make the slot allocation load dependant, at least some
numbers are required.
This commit adds TBF counters (one per direction) and the related methods
attach_tbf, detach_tbf, and num_tbfs to gprs_rlcmac_pdch.
Sponsored-by: On-Waves ehf
|
|
Currently the MS object are created when the TLLI gets known.
Therefore some information (TA, MS class) must be stored in the TBF
itself and is copied to the MS object later on. This would get even
more complex, if the allocation algorithms were extended based on
this scheme.
This commit ensures, that an MS object will always be created on TBF
allocation, even if the TLLI is not yet known. These 'anonymous'
objects are still managed by the MS storage. To avoid dangling
entries without a TLLI there (which cannnot be retrieved anyway), the
timer in the MS objects is not started after all TBF have been
detached, so that they get deleted immediately in that case.
Note that an MS object can still be removed (e.g. by replacement)
from an existing TBF, so tbf->ms() can be NULL.
Ticket: #1794
Sponsored-by: On-Waves ehf
|
|
When the MS is pinged with a longer interval, many packets get lost
even if the GprsMs object is kept. If the interval is above the time
where the DL TBF is in state FLOW (mainly influenced be the
dl-tbf-idle-time command), an new TBF must be requested via AGCH for
each ICMP PING message.
Currently the LLC frame containing the PING is immediately stored
in the TBF and gets lost, if TBF establishment fails for some reason.
This commit moves all calls to put_frame() to schedule_next_frame(),
where the data is moved from the LLC queue to the frame storage
within the TBF object. This method is only called from within
create_new_bsn() when the TBF is in the FLOW state and the frame is
going to be encoded immediately.
At all other places, where put_frame() has been called before, the
LLC message is just appended to the LLC queue in the GprsMs object.
This change effectively simplifies the related code parts, since
date/len information and discard notifications is no longer needed
there.
Ticket: #1759
Sponsored-by: On-Waves ehf
|
|
Currently LLC frames are lost or even reordered when the TBF has be
established via the AGCH and the procedure fails for some reason.
This test tries to reproduce this behaviour by throwing away the
first TBF while calling the handle() method several times. The
results of create_dl_acked_block() are checked against expected
values (this is currently party disabled because the bug still
persists).
Ticket: #1759
Sponsored-by: On-Waves ehf
|
|
This change lets the test suite fail, so it get its own commit.
Sponsored-by: On-Waves ehf
|
|
Currently the current CS value is stored in the cs field of
gprs_rlcmac_tbf and initialised when it is used the first time.
This commit adds separate fields for UL and DL CS values to the
GprsMs class and provides corresponding getter methods for GprsMs and
gprs_rlcmac_tbf.
Ticket: #1739
Sponsored-by: On-Waves ehf
|
|
The ms_class value is a property of the MS and thus belongs to the
GprsMs class. Nevertheless the MS object is created after the TLLI
gets known, so the value still has to be stored in the TBF initially.
This commit add the ms_class value to the GprsMs class and introduces
TBF accessor functions which either access that object or, if that is
not available, the value stored locally.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
The TA value rather relates to an MS and not to a single TBF. So all
TBFs share the same TA value. Currently the TA value is stored per
TBF and eventually copied from an old TBF to a new one. It is in
general only passed with an RACH request when the TLLI and thus the
MS is not yet known.
This commit adds a TA member to the GprsMs class and uses that one
when the TBF is associated to an MS object. Since the TBF is not
always associated with an MS object (after RACH or when it has been
replaced by another TBF), the TA value is still stored in each TBF
and that value is used as long as no MS object is being associated.
Sponsored-by: On-Waves ehf
|
|
These tests cover the message exchange from receiving from the first
RACH request to the first data block when establishing an uplink TBF.
This will be used to check, whether TA and other values are passed to
an MS object correctly.
In addition, the RX RACH log message in rcv_rach is extended to
contain the single block fn.
Sponsored-by: On-Waves ehf
|
|
Currently a new TBF is chained to an existing older one, either of
the other direction (active or releasing) or of the same direction
(releasing). This does not work properly work if and uplink and a
downlink TBF are being established at the same time while an old TBF
is being released. In that case, one of them is thrown away and the
pending procedure is cancelled.
The chaining is no longer necessary since the GprsMs objects have
been introduced which keep track of the active TBFs.
This commit removes the TBF members m_new_tbf and m_old_tbf and the
related methods and code paths.
Note that a new TBF can replace an older TBF entry of the same
direction within an MS object when it is associated with an MS (e.g.
by TLLI or because it is assigned via another, already associated
TBF). In that case, the old TBF is no longer associated with an MS
object.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
Currently the DL TBF's TLLI are not set. This will have to change in
the future, when the m_new_tbf chaining is replaced by the usage of MS
object to group TBFs.
This commit just calls update_ms() on newly created TBFs. This
changes many of the lines written to stderr due to the TLLI change,
but doesn't change other aspects or messages beside creating and
destroying MS objects.
Sponsored-by: On-Waves ehf
|
|
This commit extends get_ms() to really compare the IMSI if it has
been given. Matching by TLLI has a higher precedence than matching by
IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
Currently the IMSI is stored in the TBFs. Since it directly refers to
an MS, it should rather be stored in an MS object.
This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs,
changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated
MS object, and adds getter and setter to GprsMs. Before changing the
IMSI of the associated MS object, assign_imsi() checks if there is
already another MS object with the same IMSI and eventually resets
the IMSI of that one. So using update_ms() and assign_imsi() ensures
that there are not two MS object entries is the storage with the
same TLLI or the same IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
Currently the generated IMSI contains blanks due to a missing '0'
flag in the corresponding snprintf statement. In addition, the buffer
is effectively limited to 15 bytes which is shorter than the
generated character sequence, such that the last character of the
IMSI is removed.
This patch fixes both issues. Since snprintf itself will add a
terminating \0 character, the whole buffer can be passed to snprintf.
Sponsored-by: On-Waves ehf
|
|
Currently the m_tlli member in GprsMs is set by the constructor,
circumventing the TLLI confirmation mechanism.
This commit replaces the get_or_create_ms() method by a create_ms()
method which takes the TLLI and the direction (UL or DL) as
parameters to select either set_tlli() or confirm_tlli(). The MS
object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is
extended to return the DL TLLI if both of the other TLLI are not set.
Note that create_ms() will not check whether an MS object with a
matching TLLI is already stored in the list, so it should only be
called after a corresponding get_ms() in general.
Sponsored-by: On-Waves ehf
|
|
Currently the TLLI is stored in each TBF. Since each MS is now
represented by a GprsMs object which takes care of TLLI updating,
and each TBF that has been associated with an TLLI also contains a
reference to a GprsMs object, per TBF TLLI handling is no longer
needed. Keeping all TBF m_tlli members up to date is complex and
doesn't currently work correctly in all circumstances.
This commit removes m_tlli and related members from the TBF class and
the tbf_by_tlli functions from the BTS class.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
Currently the MS will be searched based on the TLLI in resue_tbf().
Since the MS object is already known in the TBF when the TLLI is set,
it can just be passed to the new TBF.
This commit removes the call to update_ms() and just adds
new_tbf->set_ms(ms()) which will also work as expected if ms() == NULL.
Sponsored-by: On-Waves ehf
|
|
According to the specification (GSM 04.08/24.008, 4.7.1.5) after a
new P-TMSI has been assigned, the old P-TMSI must be kept basically
until it has been used by both sides. Since the TLLI will be derived
from the P-TMSI, the old TLLI must also be kept until the new TLLI
has been used by both MS and SGSN.
This commit modifies the TLLI handling of GprsMs accordingly.
set_tlli() is only used with TLLIs derived from MS messages,
confirm_tlli() is used with TLLIs derived from messages received from
the SGSN. tlli() returns the value set by the MS. check_tlli()
matches each of the TLLI used by either MS or SGSN as well as the old
TLLI until it has been confirmed.
Sponsored-by: On-Waves ehf
|
|
This commit adds MS object creation and cleanup to the TBF related
code. MS objects are created when a TBF that has been "anonymous" so
far gets associated with a TLLI. When a TBF is replaced by another,
the old TBF is detached and the new one is attached to the MS. When
all TBFs have been detached, the MS object gets deleted.
The TBF related code should not call attach_tbf/detach_tbf directly
but use set_ms instead to make sure, that the references are updated
properly. GprsMs::detach_tbf also calls set_ms(NULL) on the detached
TBF object.
The MS object is not really used yet, the focus is still on object
creation, TBF association, and cleanup.
Ticket: #1674
Sponsored-by: On-Waves ehf
|
|
Currently the PCU silently discard LLC frames from the SGSN if a
DL TBF cannot be allocated.
This commit changes tbf_new_dl_assignment and reuse_tbf to send an
LLC discarded message to the SGSN in this case.
Ticket: #607
Sponsored-by: On-Waves ehf
|
|
This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and
IMSI until the function fails.
Sponsored-by: On-Waves ehf
|
|
If an MS wants to open a new UL TBF, it can either use (P)RACH or
request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF
becomes idle (LCC queue is empty but the TBF is kept open), there
aren't any Ack/Nack requests that can be used by the MS to ask for an
UL TBF, therefore it has to use the RACH. This leads to many RACH
requests even for a single HTTP transaction, so it takes some time to
retrieve even a simple web page.
This commit modifies the scheduler to regularly send Ack/Nack
requests on idle DL TBFs. It does so by extending the priority based
scheduling algorithm to have 5 priority levels (highest priority
first):
- Control block is pending
- High age (100%) threshold reached (-> request Ack/Nack)
- Data is waiting or there are pending Nacks
- Low age (200ms) threshold reached (-> request Ack/Nack)
- Pending Nacks that have been resent already
- None of the above (-> send DL dummy control block)
The 'age' refers to the time since since the last control block has
been sent on the TBF. This high age threshold is set to
dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming
for at least a poll (and TBF shutdown) after the TBF has expired and
to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms,
there will be a poll every 200ms and a final poll after
dl-tbf-idle-time. On high load, the interval between polls can get
higher, but the 'high age' poll should be in place.
This commit implements the scheduling with respect to GSM 44.060,
9.3.1a ("Delayed release of downlink TBF").
Ticket: #556
Sponsored-by: On-Waves ehf
|
|
This tests checks the implementation of the delayed release of an
downlink TBF.
Ticket: #556
Sponsored-by: On-Waves ehf
|
|
Currently if append_data() is used when there is no LLC data in the DL TBF,
it will either call reuse_tbf() which in turn will call put_frame(),
or it will append the LLC message to the queue, even if the queue and
the frame buffer are empty. This only happens with the test case so
far, but this would change when idle DL TBFs are kept open for some
time. It results in empty LLC message being sent to the MS (see log
below).
This commit changes append_data to check for this case and to
eventually use put_frame() instead of appending the LLC data to the
queue.
Addresses:
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW) downlink (V(A)==0 ..
V(S)==0)
- Sending new block at BSN 0
-- Chunk with length 0 is less than remaining space (20): add length
header to to delimit LLC frame
Complete DL frame for TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW)len=0
- Dequeue next LLC for TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW)
(len=200)
Sponsored-by: On-Waves ehf
|
