Age | Commit message (Collapse) | Author | Files | Lines |
|
The coding scheme converted to number make sense only if it's
valid. This is implicitly assumed by the code using this conversion as
non-zero value. Make those assumptions explicit with OSMO_ASSERT().
Change-Id: I8f62627b7b7b89dfa1b0d1a7e71b95b2c40fdffa
Fixes: CID70466
|
|
We do not use this style (#warning as an issue tracker replacement) in
any other Osmocom project. Also those warnings clutter compiler output
making it harder to spot warnings for the actual code.
Change-Id: I72070e2a027e60e8b80c12ccfa23ff075434689f
|
|
Change-Id: I3609da1850244f25bd4611c9d25795ca379d6325
|
|
* store SI13 in BTS struct
* check and handle BCCH SAPI
Change-Id: I610a93ce23725b182ec14e3507331295bd542f74
Related: OS#2400
|
|
* move the code to related SAPI case
* get rid of 'unused variable' warning if direct-phy is not used
Change-Id: If8cae6f3579cfdecc25bbe1d08fa88a4f664a03b
|
|
We have seen that UL MCS5- MCS9 link adaptation has not been implemented in current PCU implementation.
If the MS slowly moves far away from the BTS, the UL MCS will always stick at MCS9 no matter UL link quality values leading to poor data service experience.
The UL MCS is expected to adapt from MCS9 -> MCSx due to bad UL quality.
Below PCU traces indicate that UL MCS is quickly increasing to MCS9 (max MCS 9 was used in this test) and it never changes to other UL MCS due zero thresholds.
<0004> gprs_ms.cpp:670 MS (IMSI ): Link quality 23dB (23dB) left window [0, 0], modifying uplink CS level: MCS-6 -> MCS-7
<0004> gprs_ms.cpp:670 MS (IMSI 000): Link quality 23dB (23dB) left window [0, 0], modifying uplink CS level: MCS-7 -> MCS-8
<0004> gprs_ms.cpp:670 MS (IMSI 000): Link quality 23dB (23dB) left window [0, 0], modifying uplink CS level: MCS-8 -> MCS-9
Change-Id: I9272c337ad6399da4a47cc6e2736e25f24e099d8
|
|
We needto shift the PCU_GSMTAP_C_* constants before comparing against
the mask of enabled GSMTAP categories.
Change-Id: Ieb9332c65ed7bd57baf1aeab5ab722f92fc23b24
|
|
* introduce enum describing poll kind and use it in set_polling()
* move state change into set_polling()
* move logging into set_polling() and unify output
* move duplicated code into static function
* adjust tests to match unified logging output
Change-Id: I14074207f8bbc18b3ebd60875bb99a0a3a4b399d
Related: OS#1524
|
|
This function does not really belongs to BTS and it heavily relies on
direct access to TBF-DL members anyway.
Change-Id: I04584103018675a2f35cfb565473bfd81a208d7c
Closes: OS#1540
|
|
* separate channel request responder into inline function
* move generic TBF poll check into inline function
Change-Id: I9ec3ab8de100f0bc75044f55ac769d1083d52806
Related: OS#1539
|
|
Use helper methods instead checking and manipulating flag directly.
Change-Id: Ia3f009c52118db95b38a077e08eecda844e7f8d1
Related: OS#1539
|
|
osmo-bts already supports configuring a different path for the bts<->pcu
socket by using the 'pcu-socket' config field.
Change-Id: I9b3e1171da467519750b201849ec892a1e318129
|
|
This allows us to send GSMTAP for PTCCH only if requested by user/vty
Change-Id: Id720f4bebdce7f6152fbddddbe05036638c5866e
|
|
Change-Id: I29ecc968d56d4d0165cffa206297c42d6fb02cf4
|
|
PACCH is used only for RLC/MAC control messages, while PDTCH is used
for data.
Change-Id: I6c912e17d8c8d4178096679a541e61eeeb4b6643
|
|
We now differentiate clearly between messages that
a) we don't expect based on our reading of the spec
b) we have not implemented yet (but should)
c) we do not even know of
Also, unify the log string formats and provide BVCI whenever possible.
Change-Id: Ie32f5771d49960547ec5d7611f96a74facc1b035
|
|
In commit 939904672961fa7e28397e27f942a7d1fff4bbdf the lookup by
TLLI, TLLI-OLD and IMSI has been implemented, but the corresponding
compile-time warning was never removed.
Change-Id: I7a1767bc7cab01048e851fd4e63112bc676d6c78
|
|
Implement proper BVC RESET procedure by using libosmocore code to handle
BVCI reset and initiate PTP BVC reset if necessary.
Requires I9bf8f4dd784ccddbb9926492a85fff3293a0e913 in libosmocore.
Related: OS#1638
Change-Id: I718c949759688cb34ce6bcbb3da2092fcdfa6989
|
|
When looking at GSMTAP output so far, one is easily overwhelmed by way
too much information being presented. A lot of is consists of DUMMY
frames, which are probably of lowest interest, ever.
A concept similar to the "gsmtap-sapi" of OsmoBTS is introduced, by
which the user can configure which particular categories (uplink or
downlink control or data, gprs or egprs, ...) he actually wants to
see in his logs.
Change-Id: I297183690e98a7234dfc1608c18847d8981306e4
|
|
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
Change-Id: Id6d780c67b4af15aaa5c6f2b8b00f2a0b70a7385
Related: OS#2361
|
|
Do not access TBF internals directly from rcv_control*dl_ack_nack() -
wrap corresponding code into TBF-DL method.
Change-Id: I3d1b5782001e45617b4a960612fcfc249904b37c
Related: OS#1539
|
|
It's unclear why the warning was placed next to commented log statement
to begin with, so let's just follow that warning's advice and drop it.
Change-Id: I3ef7a45d015a28fdadf75f97294bc5d4f825b8ae
|
|
Change-Id: Ib77cb703bb1710da396db3a939700515b5c20235
|
|
The fix in 0fb294a8dd45a86b8f9eb93211b69b6dbf0a6853 was only partially
valid, as it unconditionally used $includedir, without any prefix. This
polluted the include path with host include files in cross-compiling
builds.
Let's take a different approach and simply define LITECELL15_CFLAGS
(similar to what pkgconfig does), which makes the "-I" go away if no
--with-litecell15 has been specified.
Change-Id: I63393decfe42a24dab56c7654f716c1580416ab2
|
|
* replace magic number with defined constant
* move copy-pasted code to inline functions
* remove unused code
Change-Id: I6fee0714453d0c3c3f3f875f88daea2d9c477331
Related: OS#1524
|
|
In a49475b5a822773ce10e28bf5a02e91de78bd063 we introduce the use of
bssgp_pdu_str() and change from printing the numeric code to the
stringified version of the message code. However, the format string
was not updated accordingly :/
Change-Id: I7173b692fb1f222aab44cd4f44a482038d0f51dc
Fixes: Coverity CID 169684
|
|
DL-TBD was errorneously printed as UL-TBF.
Change-Id: I94a224c0339a062e4c8d5aa6c4c858f3f0298a0d
|
|
Change-Id: Ief4b5ce4e4020edaf771eaa24f4382ec368dd18c
|
|
The osmocore bitvec is exact the same, but use a pointer instead of
a reference.
Change-Id: Id8f797631d89aa12b6e48efb2dc153a3e2f059f7
|
|
Commit b78a4a6dfef217c538d45949a6ae725e22a36b05 tried to fix a NULL dereference
error, but apparently was overly eager to return, because it looked like all
code paths would dereference the tbf.
In fact the code path further above, for msg != NULL, has "always" dereferenced
the tbf, but the lower code path, the one effecting the paging, has only
started to dereference tbf since shortly before the overly eager fix: in
da7250ad2c1cd5ddc7d3c6e10435a00b357ef8f7, to "update the dl ctrl msg counter
for ms". It seems that this tbf dereference in the paging path is bogus and the
cause for the segfault that made me write the early exit fix.
Fix that fix:
Do not exit early if tbf == NULL, stay in there to be able to reach the paging
path below.
In case of a message to be sent, assume that tbf is present, and verify: print
an error message and abort if there is a msg but no tbf, so that we will see
the error if I'm wrong there. If a tbf is missing, free the msg.
In case of no message, go on to send pending pagings, but do not attempt to
count ctrl messages for a tbf -- IIUC there will never be a tbf if we're
paging.
This should avoid segfaults while keeping PACCH paging intact.
Tweak a comment for and add a blank line above the paging section.
Related: OS#2176 CID#158969
Change-Id: Ib79f4a945e211a13ac7d1e511cc37b0940ac6202
|
|
The old tlli might be 0x00000000.
Change-Id: I2fd6fec022506e203d05e91c36ccd9e020ff816c
|
|
* extend BTS <-> PCU protocol with TXT messages
* use it to implement OML alerts support
* use it to implement version message
* add function to transmit both of them them
* send alerts for internal encoding problems as an example
* send version when BTS socket is connected
Note: requires corresponding change
If57459c0610f2c7b36d599b13087c8deef8bdd9e in libosmocore.
Related: OS#1614, 1615
Change-Id: If4ea5b3f7409df2fb030681ad468df6b711790a7
|
|
Fix error introduced in 1275a3f91a744e011b0dba82b09124d249c7abb5 by
using signed 32 bit integer which is enough for Frame Number in
GSM. Also, mark parameter constraints more explicitly:
- add assert for expected FN values
- don't perform computation for non-relative FN
The error was:
bts.cpp: In member function ‘uint32_t BTS::rfn_to_fn(uint32_t)’:
bts.cpp:554:25: error: call of overloaded ‘abs(uint32_t)’ is ambiguous
if (abs(rfn - m_cur_rfn) > RFN_THRESHOLD) {
^
In file included from /usr/include/c++/6/cstdlib:75:0,
from /usr/include/c++/6/stdlib.h:36,
from /usr/include/osmocom/core/linuxrbtree.h:97,
from /usr/include/osmocom/core/timer.h:35,
from ./bts.h:29,
from bts.cpp:21:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
^~~
In file included from /usr/include/c++/6/stdlib.h:36:0,
from /usr/include/osmocom/core/linuxrbtree.h:97,
from /usr/include/osmocom/core/timer.h:35,
from ./bts.h:29,
from bts.cpp:21:
/usr/include/c++/6/cstdlib:185:3: note: candidate: __int128 std::abs(__int128)
abs(__GLIBCXX_TYPE_INT_N_0 __x) { return __x >= 0 ? __x : -__x; }
^~~
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
abs(long long __x) { return __builtin_llabs (__x); }
^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
abs(long __i) { return __builtin_labs(__i); }
Change-Id: Ib6d895a97aa35414f245ea4406c6e78f1b4fb5b8
|
|
The implementation of the method rcv_rach() in class BTS, restores
the absolute frame number of the incoming RACH-Request by using
the relative frame number (RFn = Fn mod 42432) from the rach
request and the already known internal absolute frame number
m_cur_fn, which is continusly updated by the CCU interface.
In some rare cases, a RACH request might be received by the BTS,
a very short time before the frame number wraps in its 42432.
Depending on the PCU location, RACH request might be received
by the BSC, which forwards it to the PCU. It is then likely
that, while the RACH request is being forwarded to the PCU, the
PCU internal absolute frame number wraps before the RACH
can be processed. The relative frame number from the rach
request would then be interpreted as if it were received after
the wrapping of the internal frame number modulos.
This commit adds logic to detect and resolve this race condition.
Also a unit test is added to check some cornercases.
Change-Id: I74f00c11e5739d49f370ce6c357149e81d9aa759
|
|
In libosmocore, my patch was merged to master a bit too soon. To accomodate the
request for naming that matches the general "LOG" prefix instead of "LOGGING",
a fixup was committed to libosmocore. Adjust for that.
Original patch: change-id I5c343630020f4b108099696fd96c2111614c8067
The fixup: change-id I424fe3f12ea620338902b2bb8230544bde3f1a93
Change-Id: I4db4a668f2be07f3d55f848d38d1b490d8a7a685
|
|
Change-Id: Ied1ffc320332a605b140d23910eb0a13ef9a7a75
|
|
Change-Id: I7b41a5a26527864177c63403ad171d2987f0ff6a
Depends: libosmocore change-id I5c343630020f4b108099696fd96c2111614c8067
|
|
Solves a sanitizer issue where punct2 is unset when passed to
gprs_rlc_mcs_cps() and thus takes a value not defined in the enum.
Change-Id: I004cbbab15e6ffa2749f4b7f1df651517c2ae693
|
|
Patch-by: Aravind Sirsikar <Arvind.Sirsikar@radisys.com>
Change-Id: I81b8e1d10bfe9efba3a9f04bced66f87d93285dd
|
|
msgb_set_talloc_ctx() is deprecated since libosmocore commit
f45334be29016a36594aacc07c90e262e4994525 / change-id
I747fbbf977c4d2c868c8dead64cfc5fd86eb8d4c
Change-Id: I8d40abec428b739460ed545c9983d1b63021bd08
|
|
Change-Id: I166109dc05d3323b92cd2a42f0c7e6009950e15d
|
|
In BTS::rcv_rach() the log output is messed up because of a stray
"\n". This commit removes that.
Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
|
|
The rach request contains a relative frame number (Fn % 42432),
while BTS::rcv_rach() accepts the full frame number only.
Since the BTS is always aware of the full frame number this is
not a problem. But for BSC co-located PCU schemes it is a problem
since the rach request only contains the relative frame number
as mentioned above.
The pcu continusly receives frame number updates with the GSM time
indication message. It is simple to re-calculate the full frame
number from that information.
This patch makes BTS::rcv_rach() compatible with relative frame
numbers, while not breaking the compatibility for full frame
numbers
Change-Id: Iaa182d8d29c6a0f5fa06064c2eb48b21b1ba2775
|
|
When Packet resource request is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
|
|
This test case is for testing generation of
EGPRS PUAN. Corresponding log files .ok and .err
are modified.
Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
|
|
This adds compression of bitmap in PUAN. The compressed bitmap
is used only if the number of bits in the bitmap does not fit in
the message and there is a gain after compression.
The algorithm is part of libosmocore and so there is dependency
on the libosmocore for compilation.
The algorithm is tested on integration setup by forcing compression.
Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
|
|
Change-Id: I936a07ce87f05d9c3dc351dc3bdc4f00d78265e0
Related: OS#1553
|
|
Change-Id: I81c5c1068a8b59ee30399dac90b0f7e730fc19f4
|
|
Apparently fixes a corrupted stack looking like this on sysmobts:
(gdb) run
Starting program: /usr/bin/osmo-pcu -c /etc/osmocom/osmo-pcu.cfg
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/libthread_db.so.1".
<000b> telnet_interface.c:95 telnet at 127.0.0.1 4240
<0001> osmobts_sock.cpp:227 Opening OsmoPCU L1 interface to OsmoBTS
<0001> osmobts_sock.cpp:285 osmo-bts PCU socket has been connected
<0001> pcu_l1_if.cpp:368 BTS available
<0008> gprs_ns.c:233 NSVCI=65534 Creating NS-VC
<0008> gprs_ns.c:233 NSVCI=100 Creating NS-VC
<0008> gprs_ns.c:1568 NSEI=100 RESET procedure based on API request
<0008> gprs_ns.c:393 NSEI=100 Tx NS RESET (NSVCI=100, cause=O&M intervention)
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=2
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=2
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=3
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=3
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=4
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=4
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=5
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=5
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=6
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=6
<0001> pcu_l1_if.cpp:83 Sending activate request: trx=0 ts=7
<0001> pcu_l1_if.cpp:495 PDCH: trx=0 ts=7
<0001> pcu_l1_if.cpp:319 RACH request received: sapi=1 qta=0, ra=120, fn=103198
<0009> tbf_ul.cpp:373 LLC [PCU -> SGSN] TBF(TFI=0 TLLI=0x7f2dd569 DIR=UL STATE=FLOW) len=6
<0008> gprs_ns.c:684 All NS-VCs for NSEI 100 are either dead or blocked!
Program received signal SIGSEGV, Segmentation fault.
gprs_rlcmac_rcv_rts_block (bts=0x60a08, trx=trx@entry=0 '\000', ts=ts@entry=4 '\004', fn=7, fn@entry=103272,
block_nr=block_nr@entry=0 '\000') at gprs_rlcmac_sched.cpp:349
349 gprs_rlcmac_sched.cpp: No such file or directory.
(gdb) bt
#0 gprs_rlcmac_rcv_rts_block (bts=0x60a08, trx=trx@entry=0 '\000', ts=ts@entry=4 '\004', fn=7, fn@entry=103272,
block_nr=block_nr@entry=0 '\000') at gprs_rlcmac_sched.cpp:349
#1 0x0001151c in pcu_rx_rts_req_pdtch (trx=<optimized out>, ts=<optimized out>, fn=103272, block_nr=<optimized out>)
at pcu_l1_if.cpp:279
#2 0x0000bfcc in handle_ph_readytosend_ind (fl1h=0xafa40, rts_ind=0xb03f8) at osmo-bts-sysmo/sysmo_l1_if.c:142
#3 l1if_handle_l1prim (wq=<optimized out>, fl1h=0xafa40, msg=0xb0330) at osmo-bts-sysmo/sysmo_l1_if.c:259
#4 0x4fcd6330 in osmo_fd_disp_fds (_eset=0xbefffb68, _wset=0xbefffae8, _rset=0xbefffa68) at select.c:149
#5 osmo_select_main (polling=<optimized out>) at select.c:189
#6 0x0000b2a0 in main (argc=<optimized out>, argv=0x66628 <_ZStL8__ioinit>) at pcu_main.cpp:295
Fixes: coverity CID#158969
Related: https://lists.osmocom.org/pipermail/osmocom-net-gprs/2016-December/000785.html
Change-Id: I357492e558e98cfdbf5bb3438b5013029195b02b
|
|
Change-Id: Ie5c25b6ee30f2f1b613e923c234b03a6ffe12ae2
|