diff options
Diffstat (limited to 'doc/manuals/chapters')
-rw-r--r-- | doc/manuals/chapters/configuration.adoc | 6 | ||||
-rw-r--r-- | doc/manuals/chapters/overview.adoc | 2 |
2 files changed, 4 insertions, 4 deletions
diff --git a/doc/manuals/chapters/configuration.adoc b/doc/manuals/chapters/configuration.adoc index 1a86f320..bcf3ad7c 100644 --- a/doc/manuals/chapters/configuration.adoc +++ b/doc/manuals/chapters/configuration.adoc @@ -59,7 +59,7 @@ reached, a higher coding scheme is chosen. You can use the `cs link-quality-ranges cs1 <0-35> cs2 <0-35> <0-35> cs3 <0-35> <0-35> cs4 <0-35>` command at the `pcu` VTY config node to tune -the link quality ranges for the respecive coding schemes. +the link quality ranges for the respective coding schemes. ==== Data Size based CS downgrade Threshold @@ -114,7 +114,7 @@ filter). ==== Normal BSSGP Flow Control Tuning parameters You can use the following commands at the `pcu` VTY config node to tune -the the BSSGP flow control parameters: +the BSSGP flow control parameters: `flow-control-interval <1-10>`:: configure the interval (in seconds) between subsequent flow @@ -185,7 +185,7 @@ parameters. You can set those parameters at the `pcu` VTY config node as follows: `alpha <0-10>`:: - Alpha parameter for MS power contrl in units of 0.1. + Alpha parameter for MS power control in units of 0.1. Make sure to set the alpha value at System Information 13 (in the BSC), too! `gamma <0-62>`:: diff --git a/doc/manuals/chapters/overview.adoc b/doc/manuals/chapters/overview.adoc index e13a7b86..00314743 100644 --- a/doc/manuals/chapters/overview.adoc +++ b/doc/manuals/chapters/overview.adoc @@ -6,7 +6,7 @@ OsmoPCU is the Osmocom implementation of the GPRS PCU (Packet Control Unit) element inside the GPRS network. The OsmoPCU is co-located within the BTS and connects to OsmoBTS via its -PCU socket inteface. +PCU socket interface. On the other side, OsmoPCU is connected via the Gb interface to the SGSN. |