From bac227653a372d8cbd611eefe59ca40ab96dedab Mon Sep 17 00:00:00 2001 From: Neels Hofmeyr Date: Thu, 6 Jul 2017 18:39:28 +0200 Subject: split off osmo-msc: remove files, apply build, rename Change-Id: Icf025e5ea8d180613b3114282951c9afa67af9a7 --- debian/osmo-gtphub.default | 2 - debian/osmo-gtphub.examples | 1 - debian/osmo-gtphub.init | 150 --------------------------------- debian/osmo-gtphub.install | 1 - debian/osmocom-bs11-utils.install | 2 - debian/osmocom-bsc-nat.init | 153 ---------------------------------- debian/osmocom-bsc-nat.install | 1 - debian/osmocom-bsc.examples | 1 - debian/osmocom-bsc.install | 2 - debian/osmocom-gbproxy.init | 151 --------------------------------- debian/osmocom-gbproxy.install | 1 - debian/osmocom-ipaccess-utils.install | 3 - debian/osmocom-sgsn.default | 2 - debian/osmocom-sgsn.examples | 1 - debian/osmocom-sgsn.init | 150 --------------------------------- debian/osmocom-sgsn.install | 1 - 16 files changed, 622 deletions(-) delete mode 100644 debian/osmo-gtphub.default delete mode 100644 debian/osmo-gtphub.examples delete mode 100755 debian/osmo-gtphub.init delete mode 100644 debian/osmo-gtphub.install delete mode 100644 debian/osmocom-bs11-utils.install delete mode 100755 debian/osmocom-bsc-nat.init delete mode 100644 debian/osmocom-bsc-nat.install delete mode 100644 debian/osmocom-bsc.examples delete mode 100644 debian/osmocom-bsc.install delete mode 100755 debian/osmocom-gbproxy.init delete mode 100644 debian/osmocom-gbproxy.install delete mode 100644 debian/osmocom-ipaccess-utils.install delete mode 100644 debian/osmocom-sgsn.default delete mode 100644 debian/osmocom-sgsn.examples delete mode 100755 debian/osmocom-sgsn.init delete mode 100644 debian/osmocom-sgsn.install (limited to 'debian') diff --git a/debian/osmo-gtphub.default b/debian/osmo-gtphub.default deleted file mode 100644 index 6af82da39..000000000 --- a/debian/osmo-gtphub.default +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_FILE="/etc/osmocom/osmo-gtphub.cfg" - diff --git a/debian/osmo-gtphub.examples b/debian/osmo-gtphub.examples deleted file mode 100644 index 48c2dc028..000000000 --- a/debian/osmo-gtphub.examples +++ /dev/null @@ -1 +0,0 @@ -openbsc/doc/examples/osmo-gtphub diff --git a/debian/osmo-gtphub.init b/debian/osmo-gtphub.init deleted file mode 100755 index 160d55b70..000000000 --- a/debian/osmo-gtphub.init +++ /dev/null @@ -1,150 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: osmo-gtphub -# Required-Start: $network $local_fs -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Osmocom GTP hub -# Description: Osmocom GTP hub -### END INIT INFO - -# Author: Neels Hofmeyr - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/bin:/usr/bin -NAME=osmo-gtphub # Introduce the short server's name here -DESC="Osmocom GTP hub" # Introduce a short description here -DAEMON=/usr/bin/osmo-gtphub # Introduce the server's location here -SCRIPTNAME=/etc/init.d/osmo-gtphub - -# Exit if the package is not installed -[ -x $DAEMON ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/osmo-gtphub ] && . /etc/default/osmo-gtphub - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. -. /lib/lsb/init-functions - -DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE" - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/debian/osmo-gtphub.install b/debian/osmo-gtphub.install deleted file mode 100644 index 908c1a5eb..000000000 --- a/debian/osmo-gtphub.install +++ /dev/null @@ -1 +0,0 @@ -/usr/bin/osmo-gtphub diff --git a/debian/osmocom-bs11-utils.install b/debian/osmocom-bs11-utils.install deleted file mode 100644 index 757a8542b..000000000 --- a/debian/osmocom-bs11-utils.install +++ /dev/null @@ -1,2 +0,0 @@ -/usr/bin/bs11_config -/usr/bin/isdnsync diff --git a/debian/osmocom-bsc-nat.init b/debian/osmocom-bsc-nat.init deleted file mode 100755 index 984a7ce0b..000000000 --- a/debian/osmocom-bsc-nat.init +++ /dev/null @@ -1,153 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: osmocom-bsc-nat -# Required-Start: $network $local_fs -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Osmocom GSM network-in-a-box -# Description: A minimal implementation of the GSM Base Station Controller, -# Mobile Switching Center, Home Location regster and all other -# components to run a self-contained GSM network. -### END INIT INFO - -# Author: Harald Welte - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/bin:/usr/bin -NAME=osmo-bsc_nat # Introduce the short server's name here -DESC="Osmocom GSM BSC Multiplexer (NAT)" # Introduce a short description here -DAEMON=/usr/bin/osmo-bsc_nat # Introduce the server's location here -SCRIPTNAME=/etc/init.d/osmocom-bsc-nat -CONFIG_FILE=/etc/osmocom/osmocom-bsc-nat.cfg - -# Exit if the package is not installed -[ -x $DAEMON ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/osmocom-bsc-nat ] && . /etc/default/osmocom-bsc-nat - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. -. /lib/lsb/init-functions - -DAEMON_ARGS="-D -c $CONFIG_FILE" - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/debian/osmocom-bsc-nat.install b/debian/osmocom-bsc-nat.install deleted file mode 100644 index b561a7e11..000000000 --- a/debian/osmocom-bsc-nat.install +++ /dev/null @@ -1 +0,0 @@ -/usr/bin/osmo-bsc_nat diff --git a/debian/osmocom-bsc.examples b/debian/osmocom-bsc.examples deleted file mode 100644 index a95f12ba3..000000000 --- a/debian/osmocom-bsc.examples +++ /dev/null @@ -1 +0,0 @@ -openbsc/doc/examples/osmo-bsc_mgcp diff --git a/debian/osmocom-bsc.install b/debian/osmocom-bsc.install deleted file mode 100644 index ab9459ecc..000000000 --- a/debian/osmocom-bsc.install +++ /dev/null @@ -1,2 +0,0 @@ -/usr/bin/osmo-bsc_mgcp -/usr/bin/osmo-bsc diff --git a/debian/osmocom-gbproxy.init b/debian/osmocom-gbproxy.init deleted file mode 100755 index 924f32d10..000000000 --- a/debian/osmocom-gbproxy.init +++ /dev/null @@ -1,151 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: osmo-gbproxy -# Required-Start: $network $local_fs -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Osmocom GBproxy -# Description: A tool to proxy the GPRS Gb interface. -### END INIT INFO - -# Author: Harald Welte - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/bin:/usr/bin -NAME=osmo-gbproxy # Introduce the short server's name here -DESC="Osmocom GBProxy" # Introduce a short description here -DAEMON=/usr/bin/osmo-gbproxy # Introduce the server's location here -SCRIPTNAME=/etc/init.d/osmocom-gbproxy -CONFIG_FILE=/etc/osmocom/osmocom-gbproxy.cfg - -# Exit if the package is not installed -[ -x $DAEMON ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/osmocom-gbproxy ] && . /etc/default/osmocom-gbproxy - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. -. /lib/lsb/init-functions - -DAEMON_ARGS="-D -c $CONFIG_FILE" - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/debian/osmocom-gbproxy.install b/debian/osmocom-gbproxy.install deleted file mode 100644 index ba3f6eedb..000000000 --- a/debian/osmocom-gbproxy.install +++ /dev/null @@ -1 +0,0 @@ -/usr/bin/osmo-gbproxy diff --git a/debian/osmocom-ipaccess-utils.install b/debian/osmocom-ipaccess-utils.install deleted file mode 100644 index de13c1896..000000000 --- a/debian/osmocom-ipaccess-utils.install +++ /dev/null @@ -1,3 +0,0 @@ -/usr/bin/ipaccess-config -/usr/bin/abisip-find -/usr/bin/ipaccess-proxy diff --git a/debian/osmocom-sgsn.default b/debian/osmocom-sgsn.default deleted file mode 100644 index 77c9679a9..000000000 --- a/debian/osmocom-sgsn.default +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_FILE="/etc/osmocom/osmo-sgsn.cfg" - diff --git a/debian/osmocom-sgsn.examples b/debian/osmocom-sgsn.examples deleted file mode 100644 index 15de78d59..000000000 --- a/debian/osmocom-sgsn.examples +++ /dev/null @@ -1 +0,0 @@ -openbsc/doc/examples/osmo-sgsn diff --git a/debian/osmocom-sgsn.init b/debian/osmocom-sgsn.init deleted file mode 100755 index 0794dc1d0..000000000 --- a/debian/osmocom-sgsn.init +++ /dev/null @@ -1,150 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: osmo-sgsn -# Required-Start: $network $local_fs -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Osmocom Serving GPRS Support Node -# Description: Osmocom Serving GPRS Support Node -### END INIT INFO - -# Author: Harald Welte - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/bin:/usr/bin -NAME=osmo-sgsn # Introduce the short server's name here -DESC="Osmocom Serving GPRS Support Node" # Introduce a short description here -DAEMON=/usr/bin/osmo-sgsn # Introduce the server's location here -SCRIPTNAME=/etc/init.d/osmocom-sgsn - -# Exit if the package is not installed -[ -x $DAEMON ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/osmocom-sgsn ] && . /etc/default/osmocom-sgsn - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.0-6) to ensure that this file is present. -. /lib/lsb/init-functions - -DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE" - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/debian/osmocom-sgsn.install b/debian/osmocom-sgsn.install deleted file mode 100644 index d89c45672..000000000 --- a/debian/osmocom-sgsn.install +++ /dev/null @@ -1 +0,0 @@ -/usr/bin/osmo-sgsn -- cgit v1.2.3