| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously the '*#100#' USSD-request was abused in order to
conclude the current subscriber connection. This makes the unit
tests depend on each other, for example, if one break something
in the GSM 09.11 implementation, a half of tests would fail.
Moreover, the further changes in the GSM 09.11 implementation
will make the results less predictable (i.e. session ID, etc.).
So let's introduce a separate unit test with simple request-
response logic, while more complex tests will be in TTCN.
Change-Id: I40b4caac3113263f5a06c861dff5e10d43c319b5
|
|
A subscriber may have a few active transactions at the same time.
For example, one can receive SMS messages during a call, or during
an active SS/USSD session.
We already have connection ref-counting and transactions for CC
and SMS, so let's also use both for SS/USSD.
Change-Id: I21c6777cb88f1f4f80f75dcd39734e952bd4e8b0
|
|
Remove subscribers which fail to send periodic Location Updates from the
list of subscribers known to the VLR. This complements the IMSI detach
procedure: periodic LU expiry triggers an implicit IMSI detach.
Expired subscribers are purged from a periodic timer which iterates
over all subscribers once per minute.
Subscribers with an active connection do not expire. This is controlled
by the subscriber conn FSM which sets a subscriber's the LU expiry timeout
value to GSM_SUBSCRIBER_NO_EXPIRATION while a connection is active.
Add support for fake time with osmo_clock_gettime() to msc_vlr tests.
This functionality existed in OpenBSC but was lost during the nitb split.
This code took some inspiration from the OpenBSC implementation.
Related: OS#1976
Change-Id: Iebdee8b12d22acfcfb265ee41e71cfc8d9eb3ba9
|
|
Since the I697639d8469e5dda617b27995c4a92e1f0c0bead, call
independent SS messages are also supported by
gsm48_pdisc_msgtype_name().
So, instead of 'NCSS:0x3b' it will return 'GSM0480_MTYPE_REGISTER'.
Let's correct the expected message names.
Change-Id: If9e854ee84882d104cf2ffaceb3862fda6862f19
|
|
Change-Id: I2a09efafbdbdde0399238f7d79feea8612605201
|
|
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
|
|
In the subscr_conn_fsm instance's ID, include the Complete Layer 3 type, so
that we can see on the first glance whether a state transition belongs to MO or
MT.
The huge patch is due to the cosmetic change affecting nearly every single log
line in the msc_vlr_tests, by nature of changing the FSM's ID.
Related: OS#3122
Change-Id: I2a7e27e0f16df1872dcda64cb928c3b8528ea3f7
|
|
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
|
|
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
|
|
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
|
|
Since the logging allocations now also show up in the root context report, some
tests need adjusted talloc checks.
In msc_vlr_tests, also output the number of talloc blocks before tests are
started to show that the number didn't change after the tests.
Change-Id: Iae07ae60230c7bab28e52b5df97fa3844778158e
|
|
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
|
|
There are a number of bad failures in CC teardown handling we're solving. It
helps to see CC logging in the msc_vlr_tests.
Change-Id: I56ac269d46b48b6b85efad81c4d2343bfc41ea90
|
|
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911140b1599cccfc8171fcdab4cd9bfab.
- "Expand VLR tests"
d5feadeee8dd24f991df2892d6bcf0be8b0cf707.
- "Move IMSI into test parameters"
093300d141c300651954473d73138b72de04d931.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
|
|
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
|
|
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
|
|
Change-Id: I8672f0a76cb47595444a7ddbc4f34fc4ddaeb375
|
|
In I8de7c01f9ea1d66c384e57449c4140186f5ce6c5, libosmocore introduced
shorter names in gsm48_pdisc_names, which has implications on the
expected test output
Change-Id: I4421872a0d609dd50a6b911b928aa5e111d1ad24
|
|
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
|
|
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
|
|
Change-Id: Ie647d93a54aefad5bde8a9411d983cd60714b83d
|
|
Change-Id: I752afef2ae3ce04e813c7e9fea0e883e607c0e14
|
|
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
|
|
On incoming 04.08 messages, we log only the protocol discriminator in
decimal. Enhance: log pdisc and message type in hex, and also log the
protocol and message type as human readable string.
Also adjust the msc_vlr tests' log statements for wrapped rx/tx functions
of dtap from/to the MS.
Adjust the expected output of msc_vlr_tests.
Change-Id: Ida205d217e304337d816b14fd15e2ee435e7397d
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
|
|
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
|
|
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
|
|
Change-Id: I121b95ad6d5ecb7603815eece2b43008de487a8a
|
|
Change-Id: If0e7cf20b9d1eac12126955b2f5f02bd8f1192cd
|
