| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Give the HLR a chance to send us updated subscriber data by indicating the CN
domain to be Circuit Switched, only during a LU Request GSUP message.
Adjust msc_vlr_tests to expect the added GSUP CN domain IE to indicate CS, i.e.
append '280102'.
Related: OS#3601
Change-Id: I0c2d33fbfdb4728e480679120d06b7f3a2ccfd76
|
|
When the VLR requests a Ciphering Mode with vlr_ops.set_ciph_mode(), and if we
need a ciph algo flag from a Classmark information that is not yet known
(usually CM 2 during LU), send a BSSMAP Classmark Request to get it.
To manage the intermission of the Classmark Request, add
- msc_classmark_request_then_cipher_mode_cmd(),
- state SUBSCR_CONN_S_WAIT_CLASSMARK_UPDATE,
- event SUBSCR_CONN_E_CLASSMARK_UPDATE.
From state AUTH_CIPH, switch to state WAIT_CLASSMARK_UPDATE. Once the BSSMAP
Classmark Response, is received, switch back to SUBSCR_CONN_S_AUTH_CIPH and
re-initiate Ciphering Mode.
To be able to re-enter the Ciphering Mode algo decision, factor it out into
msc_geran_set_cipher_mode().
Rationale:
In the following commit, essentially we stopped supporting A5/3 ciphering:
commit 71330720b6efdda2fcfd3e9c0cb45f89e32e5670
"MSC: Intersect configured A5 algorithms with MS-supported ones"
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
A5/3 was no longer supported because from that commit on, we strictly checked
the MS-supported ciphers, but we did not have Classmark 2 available during
Location Updating.
This patch changes that: when Classmark 2 is missing, actively request it by a
BSSMAP Classmark Request; continue Ciphering only after the Response. Always
request missing Classmark, even if a lesser cipher were configured available.
If the Classmark Update response fails to come in, cause an attach failure.
Instead, we could attempt to use a lesser cipher that is also enabled. That is
left as a future feature, should that become relevant. I think it's unlikely.
Technically, we could now end up requesting a Classmark Updating both during LU
(vlr_lu_fsm) and CM Service/Paging Response (proc_arq_fsm), but in practice the
only time we lack a Classmark is: during Location Updating with A5/3 enabled.
A5/1 support is indicated in CM1 which is always available, and A5/3 support is
indicated in CM2, which is always available during CM Service Request as well
as Paging Response. So this patch has practical relevance only for Location
Updating. For networks that permit only A5/3, this patch fixes Location
Updating. For networks that support A5/3 and A5/1, so far we always used A5/1
during LU, and after this patch we request CM2 and likely use A5/3 instead.
In msc_vlr_test_gsm_ciph, verify that requesting Classmark 2 for A5/3 works
during LU. Also verify that the lack of a Classmark Response results in attach
failure.
In msc_vlr_test_gsm_ciph, a hacky unit test fakes a situation where a CM2 is
missing during proc_arq_fsm and proves that that code path works, even though
the practical relevance is currently zero. It would only become interesting if
ciphering algorithms A5/4 and higher became relevant, because support of those
would be indicated in Classmark 3, which would always require a Classmark
Request.
Related: OS#3043
Depends: I4a2e1d3923e33912579c4180aa1ff8e8f5abb7e7 (libosmocore)
Change-Id: I73c7cb6a86624695bd9c0f59abb72e2fdc655131
|
|
Change-Id: I2a09efafbdbdde0399238f7d79feea8612605201
|
|
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
|
|
In the subscr_conn_fsm instance's ID, include the Complete Layer 3 type, so
that we can see on the first glance whether a state transition belongs to MO or
MT.
The huge patch is due to the cosmetic change affecting nearly every single log
line in the msc_vlr_tests, by nature of changing the FSM's ID.
Related: OS#3122
Change-Id: I2a7e27e0f16df1872dcda64cb928c3b8528ea3f7
|
|
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
|
|
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
|
|
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
|
|
Since the logging allocations now also show up in the root context report, some
tests need adjusted talloc checks.
In msc_vlr_tests, also output the number of talloc blocks before tests are
started to show that the number didn't change after the tests.
Change-Id: Iae07ae60230c7bab28e52b5df97fa3844778158e
|
|
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
|
|
Also indicate in msc_vlr_test_gsm_authen.c that we're indeed sending no
capability to do R99 in the Classmark 1 during LU request.
Change-Id: Id79a77ca1f218d55dad21d9dd3de92445fb5d6bf
|
|
Change-Id: Ib0f9f573ffac2302fbd3ee28f48ccd8fce5fe286
|
|
Three recently merged commits take the msc_vlr_tests in a wrong direction.
The IMSI is usually encoded in the hex streams. The rationale behind hex
streams is that it is a) easily copied from a wireshark trace and b) exactly
the bytes as sent by an actual phone. It is hard to parameterize the IMSI
because we would have to employ our encoding functions, which I intentionally
want to keep out of the loop here.
The test number should not appear in the normal test output, so that adding a
test or changing their order does not affect expected output for following
tests. The nr is simply for manual invocation, only seen when invoked with -v.
Revert
- "VLR tests: always print test parameters"
b0a4314911140b1599cccfc8171fcdab4cd9bfab.
- "Expand VLR tests"
d5feadeee8dd24f991df2892d6bcf0be8b0cf707.
- "Move IMSI into test parameters"
093300d141c300651954473d73138b72de04d931.
Change-Id: Ie1b49237746751021da88f6f07bbb9f780d077c9
|
|
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
|
|
For each test print:
* the test number
* IMSI
Unfortunately tests are organized in such a way that we don't know the
number of particular test in advance. Nevertheless, it make sense to
always print it regardless of -v option presense.
Related: OS#2864
Change-Id: I2e1d7701f5322d2311f32b796148a8b414f53b8e
|
|
Change-Id: I8672f0a76cb47595444a7ddbc4f34fc4ddaeb375
|
|
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
|
|
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
|
|
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
|
|
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
|
|
Change-Id: Ie647d93a54aefad5bde8a9411d983cd60714b83d
|
|
Terminating one of the FSM instances may effect termination and deallocation of
the others, as well as the vlr_subscr itself. So, reserve the vlr_subscr
locally, and then dispatch events to exactly those FSM instances that exist.
The changes in expected output in the msc_vlr_tests shows that the subscriber
was deallocated from the first FSM termination, and now sticks around until
we've checked both FSMs are gone.
Change-Id: I56551ecc10f5295fe75944bdde4b583b1b621811
|
|
If dispatching a conn timeout, the conn fsm will already have been discarded,
and we cannot fire any more events to it.
The expected test output changes illustrate that we are now omitting event
dispatches that happen *after* the same FSM was already deallocated.
Change-Id: I25af3e5a1b04e3a5c9f41956cbcbbdd8439c6457
|
|
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
|
|
On incoming 04.08 messages, we log only the protocol discriminator in
decimal. Enhance: log pdisc and message type in hex, and also log the
protocol and message type as human readable string.
Also adjust the msc_vlr tests' log statements for wrapped rx/tx functions
of dtap from/to the MS.
Adjust the expected output of msc_vlr_tests.
Change-Id: Ida205d217e304337d816b14fd15e2ee435e7397d
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
|
|
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
|
|
Change-Id: I121b95ad6d5ecb7603815eece2b43008de487a8a
|
|
Change-Id: If0e7cf20b9d1eac12126955b2f5f02bd8f1192cd
|
