Age | Commit message (Collapse) | Author | Files | Lines |
|
Add an SGs interface (3GPP TS 29.118) to osmo-msc in order to support
SMS tunneling and Circuit Switched Fallback (CSFB)
Change-Id: I73359925fc1ca72b33a1466e6ac41307f2f0b11d
Related: OS#3615
|
|
For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
|
|
Following previous rename of gsm_subscriber_connection:
Some functions and #defines are still called like "msc_conn" or just "msc_",
while they are clearly about a RAN conn.
To avoid confusion with the future separate concepts of MSC roles and a RAN
connection, rename all those to match the common "ran_conn" prefix.
Change-Id: Ia17a0a35f11911e00e19cafb5d7828d729a69640
|
|
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
|
|
Change-Id: Ie5883953f48d11ec498f47c30ab4201bb956368c
|
|
In gsm_silent_call_{start,stop}(), return meaningful error codes and interpret
them on the VTY to clearly indicate the result.
Change-Id: Id5abb8f2ba901689e03040af8e51483b6c618e7f
|
|
osmo-msc still had large amounts of dead code that came along from
openbsc.git. This commit removes a lot of it, mostly stuff relevant
only to the BSC side of things (or even GPRS).
Change-Id: I247def85da2dc3ec461389fb74414a0d964e7e3c
Related: OS#2528
|
|
Change-Id: I6af40f65f0634e49939906a3e50a41e0be246794
|
|
Change-Id: I5157d6c6d0aab469011ea648369f8e743e2cb085
|
|
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
|
|
Change-Id: I1f96a1285bbd1b4607614856bca935d5c26e2da9
|
|
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
|
|
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
|
|
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|