Age | Commit message (Collapse) | Author | Files | Lines |
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
|
Use new function available in libosmocore to set up timers. Compile
tested only.
Change-Id: Ibcfd915688e97d370a888888a83a7c95cbe16819
|
|
* add version string to gsm_bts
* add PCU version string to gsm_bts
* rename GSM_BTS_TYPE_OSMO_SYSMO -> GSM_BTS_OSMOBTS to avoid confusion
between BTS model and variant
* add variant enum to gsm_bts_model using enum with variants for each
hw vendor of OsmoBTS
* show connected PCU version (if available) in vty via 'show bts'
This will come in handy when logging details regarding particular BTS
reported via OML, see:
Related: OS#1614
Change-Id: I6710d53115f34634a7b70969cc05fd5c72ff8ab2
|
|
From a human admin viewpoint it doesn't make sense to count the messages sent:
When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect
the MS to respond with a TMSI Realloc Complete message. When that fails to come
through, the LU actually ends in failure, even though a LU Accept was sent.
If a conn breaks/vanishes during LU, we cancel the LU without sending any reply
at all, so the failed LU would not be counted.
Instead, count Location Updating results, i.e. completion and failures.
(With the new VLR developments, LU counters need to be triggered in completely
different places, and this patch prepares for that by providing sensible
counters.)
Change-Id: I03f14c6a2f7ec5e1d3ba401e32082476fc7b0cc6
|
|
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will
not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC
subscriber: struct bsc_subscr.
Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no
longer have a backpointer to gsm_network (used to be via subscr->group).
Create a separate logging filter for the new BSC subscriber. The implementation
of adjusting the filter context is added in libbsc to not introduce
bsc_subscr_get/_put() dependencies to libcommon.
During Paging Response, fetch a bsc_subscr from the mobile identity, like we do
for the gsm_subscriber. It looks like a duplication now, but will make sense
for the VLR as well as for future MSC split patches.
Naming: it was requested to not name the new struct bsc_sub, because 'sub' is
too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function
prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to
match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast
to type, relatively short, unambiguous, and the naming is consistent.
Add bsc_subscr unit test.
Related: OS#1592, OS#1594
Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
|
|
Add via_ran to gsm_subscriber_connection to indicate whether a conn is coming
in via 2G/GERAN/A-Interface or 3G/UTRAN/Iu-Interface. Prepares for Iu, but
also for libvlr to decide between GSM or UMTS Auth.
Until actual Iu support is merged to master, this indicator will aid VLR unit
testing.
At some point we may also add RAN_GERAN_IU; it's not on the agenda yet, but to
clearly distinguish the names if we want to add it, explicitly name the ones we
have RAN_GERAN_A and RAN_UTRAN_IU.
Change-Id: I93b870522f725170e4265a5543f6b680383d7465
|
|
Remove the fuzzer interface that was partially implemented in
gsm_04_08.c and silent_call.c is causing problems when an
SMS is sent during an active silent call. The reason for this
is that gsm0408_dispatch() in gsm_04_08.c would decide to
rout all uplink traffic to silent_call_rx() in silent_call.c.
silent_call_rx() is a stub function that discards the data.
This patch removes the fuzzer interface code by placing ifdefs
around it, so that it can be re-activated by experimentators.
Change-Id: Id500197d58663b3f4b1756136343670388b0a4bc
|
|
In libosmocore, my patch was merged to master a bit too soon. To accomodate the
request for naming that matches the general "LOG" prefix instead of "LOGGING",
a fixup was committed to libosmocore. Adjust for that.
Original patch: change-id I5c343630020f4b108099696fd96c2111614c8067
The fixup: change-id I424fe3f12ea620338902b2bb8230544bde3f1a93
Change-Id: Ib2ec5e4884aa90f48051ee2f832af557aa525991
|
|
The LCHAN and BTS filter contexts are actually never used, so drop them until
someone adds them properly.
For now use only LOGGING_{FILTER,CTX}_VLR_SUBSCR. Some of these will change to
_BSC_SUBSCR once struct bsc_subscriber is introduced, and later on, struct
gsm_subscriber will be replaced by vlr_subscriber so that the names will match.
Depends: libosmocore change-id I5c343630020f4b108099696fd96c2111614c8067
Change-Id: Ifa82f6a461ad4c0eeddb8a38fb3833460432d16b
|
|
Log more data related to channel allocation:
- channel type
- number of paging attempts
- timers fired
Change-Id: Ib417a9c942c17b902dd80ff555cd9da5f91bff48
|
|
Parse the longer UMTS res from the extended Auth Response Parameter IE.
Parse the R99 Authentication Failure and AUTS in case of cause
GSM_REJECT_SYNCH_FAILURE which indicates a SQN re-sync request.
Both still end in 'not implemented' error logs, which are the places where the
upcoming VLR that supports UMTS AKA will integrate.
Depends on recently added constants in libosmocore in
commit 55a43b801385e07a484217925ecf2379b9f54fcf
aka change-id I745061ce8eb88aa23080dadcdbfe2d703c362a30
Change-Id: I4868bbeedc32fa7b8d03b9e3c66db618543d38ec
|
|
To be able to do R99 UMTS authentication, we need to send along AUTN bytes in
the Authentication Request. Add autn parameter to gsm48_tx_mm_auth_req() and
conditionally append the R99 AUTN TLV to the Authentication Request message.
Change-Id: I0d644559088706aa06b42b9bfe1f8c21ca6fa4da
|
|
Check conn->subscr against NULL.
gsm0408_rcv_cc() dereferences many conn members without checking presence: the
bts and lchan members may be expected to be NULL in the ongoing MSC split and
3G developments.
But the conn->subscr is initially NULL, so an MS sending a CC message before
something like a LU or CM Service Request will result in a segfault. Prevent
that.
Note: the upcoming VLR will be more restrictive on what messages are processed,
this is a "backport" to the situation on current master.
Change-Id: If067db7cc0dd3210d9eb1da15be6b637795a3ecf
|
|
cosmetic ws in common_cs_vty.c, osmo_msc.c
comment: tiny typo fix in gsm_04_08.c
In comments, drop some unbalanced braces, because simplistic C file harvesters
will break at a single opening brace even if it is in a comment. This is aimed
at the fsm-to-dot.py script in libosmocore/contrib.
Change-Id: I3c1fa53195a1e57d6fe0a6791c346d30ceff1251
|
|
Shorten some code and make obvious to the reader that the string copy is done
in a safe way.
Change-Id: I900726cf06d34128db22a3d3d911ee0d1423b1bd
|
|
Rename current subscr_con_allocate() and subscr_con_free to bsc_*,
and add two separate msc_subscr_con_allocate() and _free().
The msc_subscr_con_free() ignores all lchan members.
In libbsc use bsc_*, in libmsc use msc_*.
Change-Id: I3cf7c7cafdf4672ec7b26058bba8a77159855257
Future: there will be distinct subscr conns for libbsc and libmsc.
|
|
Time zone used to be configurable per-BTS. In the upcoming MSC-split, no BTS
structures will be available on the MSC level. To simplify, drop the ability to
manage several time zones in a core network and place the time zone config on
the network VTY level, i.e. in gsm_network. If we are going to re-add fine
grained time zone settings, it should probably be tied to the LAC.
Adjust time zone VTY config code (to be moved to libcommon-cs in subsequent commit).
Adjust time zone Ctrl Interface code.
Change-Id: I69848887d92990f3d6f969be80f6ef91f6bdbbe8
|
|
GSM 04.18, which is the successor of GSM 04.08, describes
additional RR 3g specific message types. This commit adds
log output for those messages. The behaviour is not changed
all affected message types are still forwared to the MSC
as they were before.
See also 3GPP TS 04.18, section 10.4, table 10.4.1
The change requires to update libosmocore as well, see
also commit f48fdb3a108da0dc23d7af4ac021e98e11f07152 in
libosmocore.git for details.
Change-Id: I41f2242fdf59c3eb4b3f8f7f003c17f7e0df01aa
|
|
Change-Id: I651473f638365bbd333c4c80d223cdd023dd2c51
|
|
active_calls describe all calls in active state.
call.complete Call got terminated by disconnect requested either by MS or MSC.
call.incomplete Call got terminated by any other reason.
call.active Calls reached active state.
Change-Id: I49b93af2e6a0ba16c2fb00b7b83974e8a6a16df3
|
|
The previous commit added a network backpointer to gsm_subscriber_connection.
Use it wherever it makes sense, to skip the step through the bts structure.
In some places, remove local variables that become unused.
Change-Id: I34537025986713291e14c8212a81539b497befd4
|
|
gsm0408_dispatch() is the main entry point for receiving data from the BSC/RNC
level, so make sure callers pass valid pointers before using them all the way
down the code path (related to CID#93769, a fix before this was refactored).
For unknown/unimplemented packet discriminators, make sure to return error
codes.
Change-Id: Ieec39c74a53ef4dfa971dd935c8c9aa60fef58c1
|
|
Change-Id: I131939cfba4d67d7e2c935341deeb14d09523fee
|
|
Tweaked-By: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: I7361033cd1eb919ec3c2ea2652f40ab8c75b2f99
|
|
rate counters support the export to statsd and can have a delta value.
Change-Id: Ie749cebd53a0bb618d0e23d375885712078bf8dd
|
|
Previously if subscriber was automatically created it got assigned
random MSISDN number. Make it optional (defaulting to previous behavior)
by adding following:
* new optional no-extension argument for subscriber-create-on-demand vty
command
* db unit tests
* vty test
Note: using the db made with new code might result in subscribers with
empty extension. Such subscribers cannot be deleted using old
code. Make sure not to mix db versions or manually fix it by editing
sqlite with external program.
Fixes: OS#1658
Change-Id: Ibbc2e88e4722b08854ebc631485f19ed56443cbb
|
|
Previously if subscriber was automatically created it got assigned
random MSISDN number between 20000 and 49999. Make it configurable with
new vty command "subscriber-create-on-demand random" and expand vty
tests to check it.
Change-Id: I040a1d227b0c7a1601dc7c33eccb0007941408a6
Related: OS#1658
|
|
* extend "auth policy" vty command with new option "regexp"
* add vty command "authorized-regexp" for setting arbitrary POSIX
regular expression
* add basic vty test
* add optional "regexp" argument to subscriber-create-on-demand vty
command
With those in place we can now set the regexp against which MS's IMSI
will be matched.
If IMSI match the regexp than MS is allowed to access the network. If
subscriber is already marked as authorized in HLR than it'll be allowed
regardless of IMSI matching.
The same way we can decide whether to create subscribers on-demand
basesd on IMSI regexp match. Similar to authorization this restriction
can be overridden by manually creating subscriber via vty, ctrl
interface or directly in HLR.
Change-Id: I525f4b80676de47d1d422686da2ca012301b0129
Fixes: OS#1647
|
|
In gsm04_08_clear_request(), in_release == 1 anyway and
msc_release_connection() would exit immediately without any effect. Don't
confuse the reader by passing release=1 arg.
Change-Id: I5bf9eb4889d32ad5e42ac7d096bf62fa3a493e20
Reviewed-on: https://gerrit.osmocom.org/93
Reviewed-by: Holger Freyther <holger@freyther.de>
Tested-by: Jenkins Builder
|
|
subscr_name() was called from several places:
* either without a check for subscr being NULL, which for example
was causing a segfault if we hand-over a channel before identifying the
subscriber
* or with an explicit NULL check and the ternary operator (?).
We now simplify the code by checking for the NULL Subscriber in subscr_name()
itself.
Change-Id: Ide09f4a515222eb2ec6c25e7a6a8c5f6cc2ffd4b
Reviewed-on: https://gerrit.osmocom.org/92
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
* rename variable controlling subscriber creation
* use enum for subscriber creation policy
* move check for subscriber creation policy into separate static
function
Related: OS#1658, OS#1647
Change-Id: I3b10a9a764fd3a7bb96717a990e52caae16266da
Reviewed-on: https://gerrit.osmocom.org/42
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
Rather than having a 'private' structure for kc, sres and rand, we
now finally (with 4 years delay) use osmo_auth_vector from libosmogsm,
which encapsulates authentication vectors that can be either GSM
triplets or UMTS quintuples or a combination of both.
gsm_auth_tuple becomes a wrapper around osmo_auth_vector, adding
use_count and key_seq to it.
key_seq is no longer initialized inside gprs_gsup_messages.c, as there
is no CKSN / key_seq inside the message anyway. If a usre of the code
needs key_seq, they need to manage it themselves.
|
|
In case both TCH/H and TCH/F or different codecs are configured and
internal MNCC handler is used we might end up in a situation where call
legs with incompatible channel types or codecs would be connected
resulting in a broken audio. Disconnect such calls with appropriate
error message.
Fixes: OS#1663
|
|
This provides helpful information for debugging internal MNCC handler.
|
|
|
|
libosmocore recently added inline functions to relieve callers from applying
bitmasks and bit shifts to access the transaction id of a GSM 04.08 header.
Apply these functions.
|
|
Replace hardcoded protocol discriminator and message type bitmasks with
function calls recently introduced in libosmocore.
Note that the release 98 bitmasks slightly differ from the release 99 bitmasks.
This patch uses the "default" gsm48_hdr_msg_type invocation, thus it depends on
libosmocore whether 98 or 99 bitmasks are used.
In some places, use of the bitmask was erratic. Fix these implicitly by
employing the bitmask functions:
* silent_call.c: silent_call_reroute(): add missing bitmask for MM.
* bsc_msg_filter.c: bsc_msg_filter_initial(): RR vs. MM messages.
* osmo_bsc_filter.c: bsc_find_msc() and bsc_scan_bts_msg(): RR vs. MM
messages.
* bsc_nat_rewrite.c: bsc_nat_rewrite_msg(): SMS vs. CC messages.
* bsc_ussd.c: no bitmask is applicable for the message types used here.
* gb_proxy.c: gbproxy_imsi_acquisition(): missing bit mask for pdisc.
In gprs_gb_parse.c: gprs_gb_parse_dtap(), add a log notice for unexpected
message types.
|
|
At Rhizomatica we see that some GSM 04.08 messages are leaked and
have no other indication if that is Call Control, SMS or something
else.
|
|
When a MNCC handler wants to issue the MNCC_BRIDGE primitive
overt the MNCC interface, this was not possible so far via the
MNCC socket. This primitive was so far only available from the
internal MNCC handler, more or less by accident I suppose. The reason
for this is in the way the array of two call references had been passed
into mncc_tx_to_cc().
|
|
In case of the RTP bridge mode we need to select the codec
ourselves. Rely on the same (incomplete) codec selection that
can be done using the mncc-int configuration node. This might
gain bearer capabilities support.
In case of a SDCCH a TCH/F will be attempted to be assigned.
This is an open issue for both modes and there should be a
preference for full or half-rate channels somewhere.
|
|
Implement sending MDCX on the newly allocated channel and send
the data to the same destination as the currently connected one.
This way the receiver can implement RTP RFC Appendix A.1 and
deal with the new source.
|
|
For the LCR rtp-bridge audio should directly flow to the
remote system. In contrast to the original patch audio
will now flow directly from the BTS to the remote system.
This assumes that BTS and the remote system are in the
same network segment and can directly communicate.
There are various limitations in the first iteration of
the implementation:
We could (and in the future) should delay the assignment
but currently we are forced to pick the channel and move
it to the audio state. In case we are located on a SDCCH
we always need to change but if we are on a TCH we could
send the ipa.CRCX and change the audio state a lot later.
The net effect is that the audio codec selection needs to
be done in the NITB code and not in the system connected
to it.
This only works with ip based systems. For E1 systems one
could still use the RTP socket or even try to move this
out of the process.
There is no code for handover handling and it relies on
the remote system dealing with the SSRC change of the
system.
|
|
I guess none of our users knows what a mi_type=0x02 is, but most would
know what an IMSI or a TMSI is. So let's use the newly introduced
gsm48_mi_type_name() function to fix this.
|
|
Traffic cannot sent to BTS, if there is (currently) no logical channel
associated with the transaction.
This happens, if TCH traffic is received from upper layer, but there is
no lchan available before completing immediate assignment, handover or
assignment process.
[hfreyther: The code has not been moved to tch_frame_down
but the issue looks similiar]
|
|
In case foreign simcards are used we can not do authentication
and ciphering. In case a TMSI is re-used too early and we do
page using TMSI we can't know which of the two MS is responding
to us. We could change the "secure channel" routine to ask for
the IMSI and only then stop the paging.
As we don't have ciphering there is not much use in using the
TMSI. Add a mode "no assign-tmsi" that will not assign the TMSI
during LU. Now CM Service Request and Paging Response will
work using the IMSI. There can't be a clash with that.
[ciaby fixed the vty write to use the right name]
|
|
When we can't find the TMSI then the subscriber is not in our
VLR. We have not consulted with the HLR and it is better to not
use such a severe error code.
|
|
succeeded
setup_trig_pag_evt function can receive parameter conn = NULL, if T3113 expires.
|
|
The idea of "subscriber_get_channel" was that different
requests would be coordinated. At the same time we have
seen that the "queue" can get stuck at both 31C3 and the
rhizomatica installations.
Voice calls and SMS do not need coordination. We should
be able to send SMS on a voice channel and switch the MS
from a SDCCH to a TCH in case we establish a voice call.
The SMS code itself needs to coordinate to obey the limit
of one SMS per direction but this should be enforced in
the sms layer and not on the subscriber.
Modify the code to have a simple paging coordination. The
subscriber code will schedule the paging and register who
would like to know about success/failure.
This allowed to greatly simplify the paging response
handling for the transaction code (and in fact we could
move the transaction list into the subscriber structure
now). The code gained to support to cancel the notification
of a request (but not the paging itself yet).
TODO: Cancel paging request in case no one cares about it
anymore.
|
|
|
|
|