| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
|
When we are performing Rx sensitivity testing on a BTS, we want to
deactivate the connection failure criterion / radio link timeout, i.e.
no matter how many SACCH frames in uplink are failed to decode, the BTS
should never close the channel.
OsmoBTS Change-Id I736f21f6528db5c16fa80cdb905af20673797be5 covers a way
how this behavior can be requested from the BTS via an OML attribute.
This patch adds support to the BSC to actually set that attribute.
Do not use this in production networks, as the BTS will keep open radio
channels indefinitely even if the phone is gone and no longer
transmitting anything. This is a pure testing feature.
Change-Id: I6cb94e0f024934f7baeeb728ca9ed3042fbf16d2
|
|
In addition to compile-time defined BTS model features we also need
run-time BTS features reported by BTS via OML. This should be shared by
BSC and BTS. To accommodate for this, add following:
* features bitvec to gsm_bts struct
* features descriptions
* comments to avoid confusion between 2 feature sets
* helper functions to set/query particular feature
* upper boundary on number of supported features and assertion for it
Change-Id: I02bd317097ba66585c50ebd4e8fc348f6dc3dad9
Related: OS#1614
|
|
Rename gsm_bts_has_feature() -> gsm_btsmodel_has_feature() and adjust
type signature to match gsm_btsmodel_set_feature() function and avoid
confusion with upcoming functions to check/set BTS features reported
over OML.
Change-Id: I97abdedbef568e0c2fbd37c110f7d658cf20e100
Related: OS#1614
|
|
* move value_string definition and corresponding functions for BTS type
to shared header to make it re-usable by OsmoBTS
* use consistent function naming
* add similar functions for BTS variant
* add enum to be used by OML Attribute Reporting to distinguish between
type, variant and other info
Change-Id: Ida94725a6fce968443541e3526f48f13758031fd
Related: OS#1614
|
|
* add version string to gsm_bts
* add PCU version string to gsm_bts
* rename GSM_BTS_TYPE_OSMO_SYSMO -> GSM_BTS_OSMOBTS to avoid confusion
between BTS model and variant
* add variant enum to gsm_bts_model using enum with variants for each
hw vendor of OsmoBTS
* show connected PCU version (if available) in vty via 'show bts'
This will come in handy when logging details regarding particular BTS
reported via OML, see:
Related: OS#1614
Change-Id: I6710d53115f34634a7b70969cc05fd5c72ff8ab2
|
|
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I13554563ce9289de126ba0d4cf329bafcda35607
|
|
Add vty function to explicitly set use of 4xRACH type of ack message for
PACKET CONTROL ACKNOWLEDGMENT. Previous hardcoded value (use RLC/MAC
control block) is used as a default.
This is handy for debugging issues related to Timing Advance in context
of GPRS.
Change-Id: Ie869ac0a82055110f1e3b875e246750c4e113336
Related: OS#1526
|
|
* extend "auth policy" vty command with new option "regexp"
* add vty command "authorized-regexp" for setting arbitrary POSIX
regular expression
* add basic vty test
* add optional "regexp" argument to subscriber-create-on-demand vty
command
With those in place we can now set the regexp against which MS's IMSI
will be matched.
If IMSI match the regexp than MS is allowed to access the network. If
subscriber is already marked as authorized in HLR than it'll be allowed
regardless of IMSI matching.
The same way we can decide whether to create subscribers on-demand
basesd on IMSI regexp match. Similar to authorization this restriction
can be overridden by manually creating subscriber via vty, ctrl
interface or directly in HLR.
Change-Id: I525f4b80676de47d1d422686da2ca012301b0129
Fixes: OS#1647
|
|
* Add per-BTS DTX settings
* Configure Uplink and Downlink DTX separately
* Deprecate global DTX option (it was never tested/used anyway)
* Use libosmocore function for DTX indicator in System
Information (previously it was incorrectly assigned for half-rate
channels)
Related: OS#22
Change-Id: I3d55168475ad47044b6238b55846ea22bdd518a4
Reviewed-on: https://gerrit.osmocom.org/40
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
|
|
* support for sending arbitrary static SI2quater.
* vty interface for neightbor EARFCNs specific to SI2quater.
* dynamic generation of SI2quater messages.
* unit test for SI2quater messages.
Fixes: OS#1630
|
|
This fixes a bug in the following circumstances:
* BSIC is set to 0 in the config file
* No TSC is explicitly specified at the BST level in the config file
In this case, we ended up using BSIC=0 and TSC=7, as TSC=7 is our
default initialization value.
The TSC of the CCCH/BCCH must always be the BCC, which is the lower 3
bits of the BSIC. Having configuration options for both the BSIC _and_
the TSC at the BTS level therefore makes no sense, as it only adds ways
in which users can configure non-oprational configurations. So we
remove the bts->tsc member, and keep only the ts->tsc members that allow
us to configure a timeslot-specific TSC that's different from the BTS
TSC (= BCC).
|
|
|
|
|
|
Create a control command to read and modify the gprs mode. Use
the get_string_value to indicate if the value was found or not.
This is useful for the ctrl interface where I didn't want to
replicate "none", "gprs" and "egprs". Share code to verify that
a BTS supports the mode.
Related: SYS#591
|
|
In case a BTS is dropped, iterate over the list of BTS and check
if a dependency is now missing and then drop the BTS. This check
could lead to check of 256*256 checks (e.g. all BTS on each other
in the chain and the master is being dropped). The performance
aspect of it doesn't matter for our usecase. We expect to have
pairs of BTS right now.
|
|
E.g. for the sysmoBTS2050 we have the requirement that the first
board connects before the second due clocking. The easiest point
to enforce this is the BSC. Add a simple bitmask based system to
allow to express dependencies for IP based systems.
|
|
Currently libcommon depends on libbsc, because gsm_network_init
(libcommon/gsm_data.c) directly calls gsm_net_update_ctype
(libbsc/gsm_04_08_utils.c).
This patch moves gsm_network_init to a new file libbsc/net_init.c.
Sponsored-by: On-Waves ehf
|
|
this way we can drop a copy of this function from osmo-bts.
|
|
The support has been implemented for an old model, we were told that
newer versions would be made incompatible with OpenBSC. Ther are
various warnings in the code and coverity has found some new ones.
Just remove the code as we don't know of anyone using this code.
|
|
The message was corrupt at several points. They are fixed now and
successfully tested.
A default T3122 timer value of 10 is defined by default now. If set to 0,
the reject message will not be sent. Note that when using existing configs
with T3122 value set to 0.
|
|
For short IP failures we want the RF to stay up and wait for
the re-connect but in case the A-link is gone too long it is
good to switch off the RF and wait for commands to enable it
again.
|
|
libcommon: Default to 30min location update period
libbsc: Limit VTY value for periodic update and disallow the value 0
According to GSM 04.08 Table 10.5.33 "The value 0 is used for infinite
timeout value i.e. periodic updating shall not be used within the cell."
This was the default value until now, but the code that deals with
expiring inactive subscribers in the next commit can't handle that case
so this remains a TODO for now.
|
|
|
|
|
|
gcc does not really know the _NR_OF_ELEMENTS_IN_ENUM approach, add
the _NUM_GSM_BTS_TYPE to the handled cases.
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:349:2: warning: enumeration value ‘_NUM_GSM_BTS_TYPE’ not handled in switch [-Wswitch]
|
|
|
|
so far, osmo-bts/sysmobts used to be entered as "sysmobts" type in the
configuration file. However, there are some differences in the
protocol/behaviour and we should reflect that by a new BTS plugin (with
lots of code reuse from the nanobts driver).
|
|
This timer will only be forwarded to BS11 and Ericsson Abis so far,
not to Nokia and ip.access BTS yet.
|
|
We now have a list of MSCs but in the code we will
try to access the MSC with the nr 0.
|
|
We want to have multiple MSCs but we also have some data
that is only present on a per BSC basis. Right now the
MSC data is not allocated with talloc, so we have some
change in the talloc contexts.
|
|
Assume nothing special needs to be done for the Nokia
*site hardware.
GCC warning:
gsm_data.c: In function ‘gsm_set_bts_type’:
gsm_data.c:342:2: warning: enumeration value ‘GSM_BTS_TYPE_NOKIA_SITE’ not handled in switch [-Wswitch]
|
|
Move the regexp parsing code from the NAT to libcommon as it will
be used by the NAT and BSC code. This also adds the #include <regex.h>
include to gsm_data. This header should be split up.
|
|
This includes the MetroSite, but also other Nokia BTS models.
|
|
|
|
This facilitates the use of gsm_data.c from osmo-bts
|
|
This allows us to configure a TSC for each timeslot, not just one globally for
the entire BTS.
|
|
... as a common wrapper around nm_attr and nm_state
|
|
Thanks to Holger for noticing this.
|
|
The daemons set up nanoBTS and HSL femto sockets by default, ie. the
three sockets to support these two drivers are open even if we have
no BTS of that kind.
This patch enables on-demand socket creation, ie. we only enable them
if we have one BTS at least that requires it.
I added two new attributes to the gsm_bts object, they are:
* the start() function includes the code that we need to run to start
the BTS. This new function contains the socket creation in the
particular case of nanoBTS and HSL femto.
* the started boolean, which is used to know if we have already
started the BTS, ie. we have already invoked start().
Note that, I have splitted the bts_model_*_init() function into two
functions, the _init() functions that register the BTS driver
and the _start() functions that start BTS driver on-demand.
While I was at it, I added several changes/cleanups to this patch:
* Group all bts_model_*_init() calls into one function bts_init(),
which is called in the initialization path of osmo-nitb and
osmo-bsc.
* Add openbsc/bss.h that contains the declaration of
bsc_bootstrap_network, bsc_shutdown_net and bts_init.
* Add missing e1inp_init() in osmo-bsc.
* Fix missing declaration of hsl_setup in openbsc/e1_input.h
|
|
Summary of changes:
s/struct counter/struct osmo_counter/g
s/counter_inc/osmo_counter_inc/g
s/counter_get/osmo_counter_get/g
s/counter_reset/osmo_counter_reset/g
s/counter_alloc/osmo_counter_alloc/g
s/counter_free/osmo_counter_free
|
|
Be able to configure a list of destinations (duplicates allowed)
that will be tried in a round robin fashion. The change is in
the bsc_msc_connection to operate on a list. We achieve the
round robin nature with the same trick used in the paging code
to delete and append the current entry. The nat code was updated
to compile but one can only configure one destination.
|
|
|
|
This was done with sed on the files.
|
|
libosmogsm is a new library that is distributed in the libosmocore.
Now, openbsc depends on it. This patch gets openbsc with this
change.
This patch also rewrites all include path to the new
osmocom/[gsm|core]
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
|
|
The HSL Femtocell seems to be a poor man implementation of the
ip.access Abis/IP protocol, but cutting corners wherever possible.
We try to workaround those corners wherever possible...
|
|
... and make sure tests work again after restructuring
|
