| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
The aim is to allow osmo-cscn to pass its own root talloc context and
global gsm_network struct instance cleanly. This may stir up some old and
dusty globals, but I hope it's for the better, since not all is a BSC.
To ensure that a global gsm_network pointer for the bsc_vty is set, have it as
argument to bsc_vty_init(). The vty configuration commands are added only after
bsc_vty_init(), which are needed to configure the network struct. So split up
the bsc_bootstrap_network() function into bsc_network_init() to allocate a
gsm_struct, and bsc_network_configure() to read the config file once the vty
commands are in place. In this way, no global bsc_gsmnet pointer is needed for
the bsc vty. The atomic super glue is dissolved and osmo-cscn will be allowed
to have a different name for it.
Admitted, it's still called the bsc_vty, but a split thereof is probably coming
soon, because the CSCN doesn't want any of the BSC nor BTS specific vty
commands.
|
|
The diff between this and master will probably need a lot of review and fixes.
The current state does compile, but I expect pretty much everything to be
broken now. Future development will reinstate proper functionality piecemeal.
The first goal is to get basic signalling to work, then SMS. The voice control
(RTP) is completely disabled now (see "#if BEFORE_MSCSPLIT") and will be fixed
last AFAICT.
|
|
Pubish msc_compl_l3() decl in new file libmsc/msc_api.h (but see comment).
Call msc_compl_l3() when establishing a subscriber connection for IuCS.
Remove bts from subscr_conn_allocate_iu() signature, use network, link_id and
conn_id instead.
Move subscr_conn_allocate_iu() to the top of the file, because it semantically
belongs before subscr_conn_lookup_iu().
|
|
Add noinst-header iu_cs.h and move the gsm0408_rcvmsg_iucs() declaration
there.
|
|
Add libiu to contain the parts used by both Iu-CS (in osmo-cscn) and Iu-PS (in
gprs) into libiu. It's rather thin and may make sense to move to osmo-iuh
altogether, eventually.
iu.c is half moved to libiu/, and half to osmo-cscn/iu_cs.c.
|
|
|
|
|
|
Rename conn_ctx_list -> ue_conn_ctx_list.
Indicate Iu-CS 'siblings' for a couple of functions.
Tweak/add comments.
|
|
Introduce enum interface_type and gsm_subscriber_connection.via_iface to
distinguish between A-interface and Iu-CS-interface connections.
Add gsm_subscriber_connection.iu.link_id and iu.conn_id.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It was a uint16_t*, but is passed as a uint16_t, and never used anyway, yet.
|
|
|
|
this means we no longer try to link to hard-coded files outside of the
openbsc.git repository.
|
|
|
|
This is the entry point for GMM from Gb. We will create a new one
for Iu, so let's be explicit rather than implicit.
|
|
Let's explicitly mark those sgsn_mm_ctx members that apply for Gb mode
and (upcoming) Iu mode, respectively.
|
|
Replace the global sub_connections llist with gsm_network.subscr_conns.
Initialize and apply where applicable. Remove bsc_api_sub_connections().
|
|
Make the SMPP bind address configurable (used to be harcoded as "0.0.0.0").
Add VTY command
smpp
local-tcp A.B.C.D <1-65535>
while keeping the old command 'local-tcp-port <1-65535>'. Both the old and the
new command immediately change the SMPP listening address and port.
Add a LOGL_NOTICE log when the SMPP listening address and/or port change.
However, to be useful, this patch has to go somewhat further: refactor the
initialization procedure, because it was impossible to run the VTY commands
without an already established connection.
The SMPP initialization procedure was weird. It would first open a connection
on the default port, and a subsequent VTY port reconfiguration while reading
the config file would try to re-establish a connection on a different port. If
that failed, smpp would switch back to the default port instead of failing the
program launch as the user would expect. If anything else ran on port 2775,
SMPP would thus refuse to launch despite the config file having a different
port: the first bind would always happen on 0.0.0.0:2775. Change that.
In the VTY commands, merely store address and port if no fd is established yet.
Introduce several SMPP initialization stages:
* allocate struct and initialize pointers,
* then read config file without immediately starting to listen,
* and once the main program is ready, start listening.
After that, the VTY command behaves as before: try to re-establish the old
connection if the newly supplied address and port don't work out. I'm not
actually sure why this switch-back behavior is needed, but fair enough.
In detail, replace the function
smpp_smsc_init()
with the various steps
smpp_smsc_alloc_init() -- prepare struct for VTY commands
smpp_smsc_conf() -- set addr an port only, for reading the config file
smpp_smsc_start() -- establish a first connection, for main()
smpp_smsc_restart() -- switch running connection, for telnet VTY
smpp_smsc_stop() -- tear down connection, used by _start() twice
And replace
smpp_openbsc_init()
smpp_openbsc_set_net()
with
smpp_openbsc_alloc_init()
smpp_openbsc_start()
I'd have picked function names like "_bind"/"_unbind", but in the SMPP protocol
there is also a bind/unbind process, so instead I chose the names "_start",
"_restart" and "_stop".
The smsc struct used to be talloc'd outside of smpp_smsc_init(). Since the smsc
code internally uses talloc anyway and employs the smsc struct as talloc
context, I decided to enforce talloc allocation within smpp_smsc_alloc_init().
Be stricter about osmo_signal_register_handler() return codes.
|
|
Add ctrl_vty_init() calls and feed the ctrl_vty_get_bind_addr() return value to
ctrl_interface_setup() in the following programs:
osmo-bsc
osmo-bsc_nat
osmo-nitb
osmo-sgsn
For osmo-sgsn, move the control interface setup invocation below the config
parsing, so that the ctrl_vty_get_bind_addr() can return the configured
address.
|
|
The old -m option without argument is still available and marked deprecated,
to not make users' lives more difficult than necessary.
|
|
If an MM context cannot be found based on BBSGP info and a RA UPDATE
REQUEST is received, try to find an MM context with an P-TMSI from
which the TLLI could have been derived. This also checks, whether the
routing area matches.
This is similar to the old behaviour removed by the commits
"sgsn: Only look at TLLIs in sgsn_mm_ctx_by_tlli" and
"sgsn: Remove tlli_foreign2local", except that this will only
be done for RA UPDATE REQUESTs now.
Sponsored-by: On-Waves ehf
|
|
The function is moved to gprs_utils.c, renamed, and made non-static
to be usable in other modules, too.
Sponsored-by: On-Waves ehf
|
|
At Rhizomatica we see that some GSM 04.08 messages are leaked and
have no other indication if that is Call Control, SMS or something
else.
|
|
When a MNCC handler wants to issue the MNCC_BRIDGE primitive
overt the MNCC interface, this was not possible so far via the
MNCC socket. This primitive was so far only available from the
internal MNCC handler, more or less by accident I suppose. The reason
for this is in the way the array of two call references had been passed
into mncc_tx_to_cc().
|
|
|
|
Because the sender is known, one unique TEI per tunnel suffices to map the TEIs
that the peers are sending to gtphub, instead of previously 4 (SGSN<->GGSN
interaction on User and Ctrl plane, where each had an own unique TEI).
Also, previously, a tunnel's endpoints should also have been checked against
each other for TEI reuse, not only against the endpoints of other tunnels. This
simplification fixes that problem for free.
Thus simplify TEI reuse detection and improve VTY show readability and
debugging.
Adjust log and VTY output for tunnels.
Adjust tests accordingly.
Suggested-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Sponsored-by: On-Waves ehi
|
|
Count bytes and packets per peer port, as well es per tunnel enpoint, which
adds two more levels of detail.
Sponsored-by: On-Waves ehi
|
|
We now store the pre-printed lchan name in lchan->name to avoid having
to call sprintf every time there is a debug statement somewhere,
particularly as most of those debug statements are going to be inactive
most of the time.
|
|
If an SGSN is behind NAT, we cannot rely on the default ports. Specifically,
if a GGSN sends a message, the forwarding to the SGSN should go to whichever
port the SGSN last sent from (whether sequence nr is known or not).
Add sgsn_use_sender config and VTY command, and store the sender instead
of the GSN Address IE and default port if set.
Sponsored-by: On-Waves ehi
|
|
Sponsored-by: On-Waves ehi
|
|
If a GSN indicates that it has reset, tear down each known tunnel for that GSN
individually (don't send the GSNs on the other side a different restart
counter, because they represent more than just this GSN).
Sponsored-by: On-Waves ehi
|
|
During resolution of the header TEI, also return the tunnel struct that
resolved the TEI, so the Delete PDP Ctx code does not need to look it up
again.
Upon Delete PDP Ctx Request, remember the IEs and that a request was made.
Upon Delete PDP Ctx Response, find the pending delete and remove the
corresponding tunnel, iff the response indicates success.
Add a context deletion to regression tests, rename the test appropriately.
Sponsored-by: On-Waves ehi
|
|
Sponsored-by: On-Waves ehi
|
|
This is a mostly cosmetic change. Instead of separate buffer handling
functions, reduce some code duplication by using a side_idx just like the
plane_idx, with arrays.
Sponsored-by: On-Waves ehi
|
|
There's no need to keep two separate number pools when both can be fed
from the same pool. User and Ctrl plane TEIs can technically overlap without
colliding, but it doesn't hurt if they don't overlap, either.
Sponsored-by: On-Waves ehi
|
|
Simplify looping over sides and planes. I'm tired of typing the same for
loops all the time.
Sponsored-by: On-Waves ehi
|
|
Force passing a restart counter, by adding such arg to gtphub_start() (test
suite is not affected by this).
In gtphub_main.c, add -r,--restart-file <path> and next_restart_count() to
maintain the counter file. While at it, tweak the cmdline help to unify the
formatting (mostly commas and a missing line break).
Send gtphub's own restart counter. So far, the sender's restart counter was
copied through, which would break as soon as more than one GSN would talk to
the same peer with differing restart counters.
Also fix the in-mem restart counter data type (one octet, not two).
Sponsored-by: On-Waves ehi
|
|
So far, gtphub worked perfectly by only tracking single TEIs ... for probably
most uses. But a Ctrl plane tunnel may have expired despite a still active
corresponding User plane tunnel. The User plane would continue to work
indefinitely, but if any Ctrl messages followed after more than six hours of
Ctrl silence, they would have been dropped due to an expired TEI mapping.
We want to
- combine expiry of a user TEI with its ctrl TEI. (done in this patch)
- upon delete PDP context, remove both user and ctrl TEI mappings. (future)
- when a peer indicates a restart counter bump, invalidate its tunnels.
(future)
To facilitate these, track tunnels, complete with both SGSN's and GGSN's
address, original and replaced TEIs, all for both user and ctrl plane, in a
single struct. A single expiry entry handles the entire tunnel, instead of
previously four separate expiries for each endpoint identifier.
Add the concept of a "side", being either GGSN or SGSN, to index tunnel
endpoint structs, and so on.
Track the originating side in the gtp_packet_desc.
Add header_tei_rx: set_tei() overwrites header_tei, but the originally received
header TEI is still needed to match a Create PDP Context Response up with its
Request (and for logging).
Adjust the test suite to expect tunnel listing strings instead of TEI mappings,
with a bonus of making it a lot easier to grok, and including the IP addresses.
Add regression test for refreshing tunnel expiry upon use.
Note: the current implementation is as slow as can possibly be, iterating all
the tunnels all the time. Optimizations are kept for a future commit, on
purpose.
BTW, the sequence number mapping/unmapping structures remain unchanged.
Sponsored-by: On-Waves ehi
|
