diff options
author | Neels Hofmeyr <neels@hofmeyr.de> | 2020-03-18 01:10:42 +0100 |
---|---|---|
committer | laforge <laforge@osmocom.org> | 2020-06-03 12:51:38 +0000 |
commit | 346a3b956fa8de579047774b53fdd788071a21af (patch) | |
tree | 08d67cb4bf3fefddf437b40be5018efbfdc393f8 /doc/manuals | |
parent | 92b02463013aad6bafd897c330d22f24fb9bb77f (diff) |
manual: link to new common cs7-config.adoc, remove some dup of that
Related: OS#2767
Depends: Ia2508d4c7b0fef9cdc57e7e122799a480e340bf7 (osmo-gsm-manuals)
Change-Id: Ie88dd2c7f7318a31ae04fbd6930346d92141fde5
Diffstat (limited to 'doc/manuals')
-rw-r--r-- | doc/manuals/chapters/running.adoc | 32 | ||||
-rw-r--r-- | doc/manuals/osmomsc-usermanual.adoc | 2 |
2 files changed, 11 insertions, 23 deletions
diff --git a/doc/manuals/chapters/running.adoc b/doc/manuals/chapters/running.adoc index e8320a736..688fbbef2 100644 --- a/doc/manuals/chapters/running.adoc +++ b/doc/manuals/chapters/running.adoc @@ -107,20 +107,21 @@ running on the same interface: ==== Configure SCCP/M3UA to accept _A_ and _IuCS_ links -OsmoMSC will contact an STP instance to establish an SCCP/M3UA link. BSC and -HNBGW will then reach the MSC via this link. By default, an STP instance is -assumed to listen on the default M3UA port (2905) on the local host. +OsmoMSC acts as client to contact an STP instance and establish an SCCP/M3UA +link. -Establishing an SCCP/M3UA link towards an STP instance not on the local host -can be configured as follows: +An example configuration of OsmoMSC's SCCP link: ---- cs7 instance 0 - asp my-OsmoMSC 2905 0 m3ua - ! IP address of the remote STP: - remote-ip 10.23.24.1 + point-code 0.23.1 + asp asp-clnt-OsmoMSC-A-Iu 2905 0 m3ua + remote-ip 127.0.0.1 + sctp-role client ---- +This configuration is explained in detail in <<cs7_config>>. + Note that _A_ and _IuCS_ may use different SCCP instances, if so desired: ---- @@ -135,21 +136,6 @@ msc cs7-instance-iu 1 ---- -A full configuration needs an `asp` on an `as` -- an Application Server Process -running on an Application Server -- as well as a local point code and routing -configuration. The SCCP VTY automatically creates those parts that are missing, -by assuming sane defaults. A complete configuration would look like this: - ----- -cs7 instance 0 - point-code 0.23.1 - asp my-OsmoMSC-A-Iu 2905 0 m3ua - remote-ip 127.0.0.1 - as my-as-for-OsmoMSC-A-Iu m3ua - asp my-OsmoMSC-A-Iu - routing-key 0 0.23.1 ----- - ==== Configure GSUP to reach the HLR OsmoMSC will assume a GSUP server (OsmoHLR) to run on the local host and the diff --git a/doc/manuals/osmomsc-usermanual.adoc b/doc/manuals/osmomsc-usermanual.adoc index d680a5119..848d9c0dd 100644 --- a/doc/manuals/osmomsc-usermanual.adoc +++ b/doc/manuals/osmomsc-usermanual.adoc @@ -22,6 +22,8 @@ include::./common/chapters/vty.adoc[] include::./common/chapters/logging.adoc[] +include::./common/chapters/cs7-config.adoc[] + include::{srcdir}/chapters/net.adoc[] include::./common/chapters/smpp.adoc[] |