add full SDP codec information to the MNCC socket

This way osmo-msc can benefit from the complete codec information received via
SIP, which was so far terminated at osmo-sip-connector. osmo-sip-connector
could/should have translated the received SDP to MNCC bearer_cap, but this was
never implemented properly. Since osmo-msc already handles SDP towards the MGW,
it makes most sense to pass SDP to osmo-msc transparently.

To be able to send a valid RTP IP:port in the SDP upon the first MNCC_SETUP_IND
going out, move the CN side CRCX to the very start of establishing a voice
call. As a result, first create MGW conns for both RAN and CN before starting.

The voice_call_full.msc chart shows the change in message sequence for MO and
MT voice calls.

Implement cc_sdp.c, which accumulates codec information from various sources
(MS, BSS, Assignment, remote call leg) and provides filtering to get the
available set of codecs at any point in time.

Implement codec_sdp_cc_t9n.c, to translate between SDP and the various
libosmo-mgcp-client, CC and BSSMAP representations of codecs:
- Speech Version,
- Permitted Speech,
- Speech Codec Type,
- default Payload Type numbers,
- enum mgcp_codecs,
- FR/HR compatibility
- SDP audio codec names,
- various AMR configurations.
A codec_map lists these relations in one large data record.
Various functions provide conversions by traversing this map.

Add trans->cc.mnccc_release_sent: so far, avoiding to send an MNCC release
during trans_free() was done by setting the callref = 0. But that also skips CC
Release. On codec mismatch, we send a specific MNCC error code but still want a
normal CC Release: hence send the MNCC message, set mnccc_release_sent = true
and do normal CC Release in trans_free().
(A better way to do this would be to adopt the mncc_call FSM from inter-MSC
handover also for local voice calls, but that is out of scope for now. I want
to try that soon, as time permits.)

Change-Id: I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f

0 files changed, 0 insertions, 0 deletions